power cord anchorage torque test apparatus

Brand Name:Pego

Place of Origin:China

Model Number:PG-PCT

...Testing Equipment IEC60320-1 Power Cord Anchorage Torque Test Apparatus with Diameter 100mm Torque Disk 1. Introduction Cord anchorage torque test apparatus designs to meet the test requirements of IEC60320-1 clause 22.2.3. The cord of connectors / plug connectors is subjected for 1min to a torque of 0.1N.m / 0.15N.m / 0.25N.m. The torque test shall be carried out after the completion of pull test. During the tests, the cord

Brand Name:Sinuo

Model Number:SN2120A

Place of Origin:China

IEC 60884-1 Flexible Cable Cord Anchorage Torque Test Device For Plug And Sockets Test System overview Complies with IEC60335-1 clause 25.15, IEC 60884-1:2006 clause 23.2 and table 18, VDE0620 clause ...

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

... 110, Figure 111 and Table 114. Product overview Samples and restrictions: Electric vehicle AC and DC charging station Test purpose: The flexible cord anchorage of the appliance shall relieve conductors at the terminals from pulling force and torque. This

Brand Name:KingPo

Place of Origin:China

Model Number:KP-LN9

... standards. It is use to perform tension and torque test on the power cord. It is used to test the strength of connections. Accordding to the standard IEC 60335-1 Clause 25.15 --“Appliances provided with a supply cord, and appliances intended to be

Brand Name:HongCe

Model Number:PST - 1

Place of Origin:China

...Cord Anchorage Torque And Twist Tester Electrical Appliance Tester Product information: The test appliance conforms to IEC60335-1:25.15. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. Parameters: Power Supply AC230V, 50HZ Pull force weights 20N*2,30N*2( the pulling force of 30N,60N,80N,100N can be achieved) Torque...

Brand Name:ZL

Model Number:ZL-3425

Place of Origin:China

...25.15, IEC60065: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as

Brand Name:HJ

Model Number:HJ0609

Place of Origin:China

...Power Cord Anchorage Test Equipment Manually Operation Standard: IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements clause 25.15. Application: It is used to test the household appliances supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall have a cord anchorage. The cord anchorage...

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved

Place of Origin:China

Brand Name:KeRang

...Cable Torque Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating...

Brand Name:DAXIAN

Model Number:DX8431

Place of Origin:China

...Power Cords Pulling Force And Torque Testing Machine Product Description: This instrument is based on the GB2099.1, GB4706 and IEC60320 standards, used to test the tensile and torsion tests of various types of electrical power cords, and to assess whether the power cord clamping device is firm. Instrument parameters: 1) Station: 1 2) Pull value: 30N, 60N, 100N 3) Torque value: 0.1, 0.25, 0.35N.m 4) Rally time: 1S 5) Torque

Brand Name:SHC

Model Number:SC-RL03

Place of Origin:China

... is not subject to the stress including the wringing and the wear resistance. Technical parameters: Weight 2N, 3N, 5N, 7N, 8.5N 1pc Torque 0.1Nm, 0

Place of Origin:Hunan, China (Mainland)

Brand Name:SHENGANG

Model Number:JDD210-50-4

... power supply cable, which can be in synchronous operation with the mobile electrical apparatus to coil or release the cables. In view of its power patterns which is divided into torque motor driven typeand three phase asynchronous motor driven type.

Brand Name:MIYU

Model Number:MY-XC-C6-R

Place of Origin:China

Wire/Cable Bending Tester (MY-XC-C6), Sheet metal material with white color Description This testing machine is customized according to the "General Safety Requirements for Communication Cord and Power Cord" and is written by advanced touch screen. PLC ...

Brand Name:YUYANG

Model Number:YY615

Place of Origin:China

Electric Wire Flame Test Chamber 1000Ml / M Flow Range For Finished Wire / Cord Scope: Applicable to finished wire or cord in the specified conditions to inhibit the spread of flame has the ability, and its use of the cable: that is, power, communication...

Brand Name:HUATEC

Model Number:HCDX-Y2

Place of Origin:China

Features: • Ergonomic, light-weight design • IP54 sealed housing resists dust and water • Field-swappable power cord • Isolated, replaceable trigger switch • Steel shields for leg protection • Exceeds ASTM lifting specifications • Convenient carrying case ...

Brand Name:AISRY

Model Number:ASR-5622B

Place of Origin:China

Touch Screen Wire And Cable Testing Machine Product Introduction: Wire bending test machine for plug leads, power cord, USB cable, headphone cable, audio cable, headphone cable and other finished wire bending test or swing test. This machine is the sample ...

Brand Name:JIEDONG

Model Number:JD-3003

Place of Origin:Guangdong, China

...Test Machine 1 Station Test Swing Angle 0-360 Degrees Wire Torsion Testing Machine JD-3003 product description: Designed and manufactured according to GB4909.4, ISO2627/R957, CNS-1111/8938, UDC621.315.14/620.175 and JIS3005, suitable for small household appliances such as hair dryers, hair clips, power cords for manufacturers and quality inspection departments. Torque test...