potting compound for electronic components

Brand Name:Hanast

Model Number:HN-8808

Place of Origin:Guangdong,China

...Potting Compound For Electronic Components Electrical Module Low Viscosity AB Potting Glue Product description: HN-8808, two parts, low viscosity potting compound that cures at room temperature to soft rubber. Two-component, it cures on its own after being mixed at room temperature. Product application: 10:1 potting compound, with its convenient mix ratio, is widely used for protecting electronic...

Brand Name:Ziitek

Model Number:TIS680-12AB

Place of Origin:China

...Compound Thermally Conductive Potting Compound for Electronic Component TIS™680-12AB Series is a two-part silicone potting adhesive with high thermal conductivity, room temperature curable,long working time and firere sistance.lt is especially suitable for capacitor, small electronic...

Brand Name:Maxtech

Model Number:SI8125

Place of Origin:China

Two-component clear silicone potting compound for electronic component ∎Product Description ●SI8125A/B is used in potting protection of varied components. It can vulcanize to deep layer. The two components have a good fluidity after mixing. The ...

Brand Name:Bai Zhuang

Model Number:BZ-3903

Place of Origin:China

...Potting Compound For Power Electronics Product Description BZ-3903 is a two-component addition-cure Electrical Potting Compound optimized for power electronics requiring superior waterproof sealing and environmental protection, featuring excellent fluidity, thermal conductivity (≥0.8 W/m·K), and wide temperature tolerance (-60~200℃). With a 1:1 mix ratio and balanced pot...

Brand Name:Huitian

Model Number:5290

Place of Origin:China

.... Ø No need to add primer coating before use Ø High & low temperature resistant Ø (UL94-1996) V0 ● Main Applications: Ø For the deep potting of power supply and electronic components and parts. Ø Especially suitable for the potting of

Brand Name:Ziitek

Model Number:TIS680-12AB

Place of Origin:Vietnam

...Compound Thermally Conductive Potting Compound For Electronic Component TIS™680-12AB Series is a two-part silicone potting adhesive with high thermal conductivity, room temperature curable,long working time and fire resistance.lt is especially suitable for capacitor, small electronic...

Place of Origin:USA

Brand Name:3M

Model Number:P270

...Clear and Black variants. It features a 1:1 mix ratio by volume, 60-70 minute worklife at 23°C, designed for potting, sealing, and encapsulation of electronic components with negligible exotherm and non-corrosive to copper. Product Description​ DP270 is

Brand Name:BAIYUN

Model Number:SDM401

Place of Origin:Guangzhou, China

BAIYUN SDM401 Industrial Two-component Sealant Company Profiles Guangzhou Baiyun Chemical Industry Co., Ltd. was established in 1985, which is the first silicone sealant research and production company in China. During this 36 years history, we always ...

Place of Origin:China

...component silicone RTV gel glue potting machine for electronic component potting and casting We offers an automatic dosing machine for degassing, proportioning, mixing and high precision dosing of two component resins (epoxy, polyurethane, silicone..) in the atmospheric environment. Machine Picture Machine Working principle Compound...

Brand Name:Ziitek

Model Number:TIS280-03A/B

Place of Origin:China

High Transmittance Low Temperature Conductive Adhesive Glue 0.3W / mK TIS™ 280-03AB is a two-component,high transmittance, high thermal conductive, low temperature cured, long pot life, fire resistant Silica encapsulant glue.This potting glue to apply on ...

Brand Name:MC SILICONE

Model Number:MCSIL-E160

Place of Origin:China

... of Part A and Part B. The component A is white and component B is black for easy identification and inspection of complete mixing.(colors can be adjusted as per customer requirement.) When the components are thoroughly mixed in a 1:1 ratio by weight or

Brand Name:AOK

Model Number:GF

Place of Origin:China

Fast Curing Thermally Conductive Encapsulant Potting Compound Silicone With OBC Attribute Value Test Method Composition Ceramic filler + Silicone - Color/Component A White Visual Color/Component B Sliver Grey Visual Density(g/cc) 1.8 ASTM D792 Usage ...

Brand Name:Aorun

Model Number:Aorun 1311

Place of Origin:China

...Potting Compound For Electronic Components Encapsulation Quick Detail: Name Epoxy Resin 1311 Usage Epoxy floor coatings Mixing Ratio A: B =2:1 (By weight) Applications Epoxy floor coatings,Electronic component potting epoxy compound Description: silicones systems. Our products feature outstanding electrical insulation properties, superior adhesive strength, thermal conductivity and excellent chemical resistance. Potting

Brand Name:Reking

Model Number:Compound balanced belt

Place of Origin:China

... belts width and connected with either straight or crimped cross bars . Compound Balanced Belt has two kinds edge treatment . One is Welde edge and other is chain edage. We can produce as the edge treatment you want . Compoud Balanced ...

Brand Name:GDS

Model Number:MG-1280

Place of Origin:CHINA

...potting machine used for electric touthbrush charger Precision 2K Glue Potting Machine for Electric Toothbrush Charger Waterproofing Our advanced 2K glue potting machine is specifically engineered for high-precision encapsulation of electric toothbrush chargers and other small electronic components. This automated potting...

Brand Name:wenyou

Model Number:9205L

Place of Origin:China

...-viscosity solvent-free modified polyol. Indoor electrical insulator potting compound two component epoxy resin liquid Applications Indoor electrical insulators for medium and high voltage applications, such as insulators, dry-type transformers, and other

Brand Name:METS

Place of Origin:XIAMEN.CHINA

...electronic components Stamping Capability A: The min. pitch: 0.5mm B: Highest stamping speed: 600SPM/min or more C: Precision: ±0.003mm D: Rate of hole diameter and thickness 0.85:1 E: Stamping material thickness:0.05-2.0mm F: zero or less loss of material use. Compound Die Stamping is the process where the die separates or blanks the part from a steel strip in one stroke. A Compound

Brand Name:Original

Model Number:MAX5402EUA+T

Place of Origin:Original

...: Digital Potentiometer ICs Series: MAX5402 Resistance: 10 kOhms Temperature Coefficient: 50 PPM / C Tolerance: 0.25 Number of POTs: Single Taps per POT: 256 Wiper Memory: Volatile Digital Interface: Serial (3-Wire)

Brand Name:WINNER

Model Number:PW-6

Place of Origin:CHINA

... Copper Wire For Manufacturing of Electronic Components The Pd coating also extends the Highly Accelerated Stress Test (HAST) reliability. It prevents corrosion of the bonded wire span against halide attack from moulding compounds. When using PCC bonding...