plastic softening temperature tester

Brand Name:JINHAIHU

Model Number:RV-300C

Place of Origin:BEIJING, CHINA

...determine the thermal deformation temperature and Vicat softening point temperature of various thermoplastic materials such as plastics and rubber. Widely used in the production and raw materials of plastic products, scientific research and teaching. This

Brand Name:AI

Model Number:AIC41101

Place of Origin:China

... such as heat distortion temperature and Vicat softening point temperature. It is an essential quality control equipment for institutes, universities and enterprises self-test, adopted PLC programmable controller for temperature regulation using the

Place of Origin:China

Brand Name:CHENGFENG

Plastic Spot Temperature Tester, Is Designed and Manufactured in Accordance with GB4610-2008 Product Description CF8602 Plastic Spot Temperature Tester Product Description: Also known as: GB4610-2008 ignition temperature tester GB/T9343-2008 plastic hot air furnace ignition temperature tester DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610-2008 "Determination of Ignition Temperature of Plastic...

Brand Name:DAXIAN

Model Number:DX8602

Place of Origin:China

... by plastic hot air furnace method" and GB/T9343-2008 "Determination of flash ignition temperature and self ignition temperature for plastic combustion performance test methods". It fully complies with GB4610-2008 and also meets the

Brand Name:SKYLINE

Place of Origin:CHINA

...2008 and meets the requirements of ISO871-2006. It is used to test the burning and flame retardant properties of plastic materials. GB4610-2008Plastic Ignition Temperature Tester test principle: In the heating chamber of the hot air furnace, the pattern is

Brand Name:YUYANG

Model Number:YY404

Place of Origin:China

...ISO 871 Plastic Ignition Temperature Tester Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum temperature of the material....

Brand Name:LIYI

Model Number:LY-3030

Place of Origin:China

..., high strength thermosetting laminated materials of nonmetal material such as heat distortion temperature and vicat softening point temperature is determined. Easy operation, precise control, intelligent is extremely high. Design Standard: GB/T 1633,GB/T

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R801-1

...mainly applied to thermal deformation temperature and Vicat softening point temperature determination of plastic , hard rubber , nylon , electrical insulating material , fibre reinforced composite , high strength thermosetting laminated material and other

Brand Name:GC

Model Number:GC-WDK-4

Place of Origin:China

... load and temperature. It is commonly used in the plastics industry to assess the heat resistance and dimensional stability of thermoplastic materials. -The machine can also measure the heat resistance of materials by determining the temperature at

Model Number:LR-A020

Place of Origin:China

Brand Name:Lonroy

... using computer display operation.The product is simple to operate, convenient to use, stable in performance, high in precision, and can monitor the test temperature and deformation amount in real time during the test.At the end of the test, the

Brand Name:Kejian Kinsgeo

Model Number:KJ-3098

Place of Origin:CHINA

... for temperature adjustment using computer display operation. The product is simple to operate, easy to use, stable performance, high precision of the product, and can monitor the test temperature and deformation in real time during the test process; the

Brand Name:ZL

Model Number:ZL-3015A

Place of Origin:China

Plastic HDT VICAT Softening Point Temperature Tester , Plastic Molds HDT Vicat Tester Specification: Temperature range Room temperature - 300°C Heating rate (120±10)°C/h (12±1°C/6min); (50±5)°C/h(5±0.5°C/6min) Temperature error 0.1°C Temperature ...

Brand Name:Sinuo

Model Number:SN300FA

Place of Origin:China

...Softening Temperature Determination Tester Product Information: This test apparatus designed and manufactured according to the standard of IEC60065:2014 clause 7.2 and table 3, ISO75-1, ISO306. It is mainly used for the determination of thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics...

Brand Name:Shengtai Instrument

Model Number:ST104A

Place of Origin:CHINA

... with the method for the determination of the softening point of ointments 2102 in 2020. This method is used for the determination of the temperature when the plaster is softened by heat under specified conditions, that is, the temperature when the

Brand Name:HOOHA

Model Number:ZY6138

Place of Origin:Guangdong

... polymer materials (such as plastics, rubber, nylon, electrical insulating materials, etc.) and the temperature of weika softening point. Meet the standard: Standard: GB/T 8802-2001, ISO 2570 hard polyethylene (PVC), GB/T 1633, GB/T ...

Brand Name:Haida

Model Number:6055-HD

Place of Origin:China

...temperature brittleness tester Description: Brittleness Temperature Tester is intended to measure the brittleness temperature of vulcanized rubber, which is the lowest temperature at which none of a set of specimens fractures due to low-temperature embrittlement when tested under the specified conditions. The low-temperature brittleness tester can be used to make comparative identification of functional performance for the non-rigid plastic

Brand Name:HOOHA

Model Number:ZY6138

Place of Origin:China

...plastics, rubber, nylon, electrical insulating materials, etc.) and the temperature of weika softening point. Meet the standard: Standard: GB/T 8802-2001, ISO 2570 hard polyethylene (PVC), GB/T 1633, GB/T 1634, ISO 75-1987 (E), ISO 306-1987 (E), etc. Main parameters: Test range: at room temperature...

Brand Name:Gold

Model Number:GD-ISO871

Place of Origin:China

...Temperature Tester Product Introduce The ISO 871 Ignition Temperature Tester is a professional equipment designed based on the ISO 871:2022 international standard, which is used to determine the ignition temperature of plastic materials. The instrument uses a hot air furnace to accurately control the air flow rate and temperature rise rate to determine the spontaneous combustion or ignition temperature of plastics in a high temperature

Brand Name:HTI

Model Number:HTX-054

Place of Origin:Guangdong,China(mainland)

... when the plastic is damaged under prescribed impact conditions.We called that brittleness temperature.We can compare the performance of hard plastic with the performance of other elastic materials in low temperature.It can also be used to test the

Brand Name:RAYTECH

Model Number:XHR-150

Place of Origin:CHINA

Plastics Rockwell Hardness Tester XHR-150, Hard Rubbers Hardness Tester, Initial Test Force 10kgf Plastics Rockwell Hardness Tester XHR-150, Hard Rubbers Hardness Tester, Initial Test Force 10kgf Plastics Rockwell Hardness Tester XHR-150, Hard Rubbers Hardness Tester, Initial Test Force 10kgf Plastics Rockwell Hardness Tester XHR-150, Hard Rubbers Hardness Tester, Initial Test Force 10kgf Main Function: XHR-150 Plastics Rockwell hardness tester