p1001 shaft for tension frame

Brand Name:HONFE

Model Number:VAMATEX P401/P1001

Place of Origin:CHINA

Description: Shaft For Tension Frame 2101024 Vamatex P401/P1001 Rapier Loom Parts Rapier loom parts Part Name Honfe No. Models Part No. Shaft For Tension Frame RVCA-0171 Vamatex P401/P1001 2101024 Honfe Supplier Co.,Ltd was established in 2000 and has been...

Brand Name:Zhutang

Model Number:FXJ-1

Place of Origin:China

... to feed the wire for coil winding machine. It is provided with main frame, shaft, pneumatic brake. When coil winding machine winds the wire, the coil stand will feed the wire and provide tension to make the wound wire tight. This coil stand can place one

Brand Name:Wiremac

Model Number:F500PLC1

Place of Origin:China

... holder, pneumatic braking device and base. Four quartering frames are fixed on the left and right stranding discs, on which 6 and 12 sets of reel clamping devices are installed respectively. The tension of the reel adopts the mechanical tension belt.

Brand Name:QUL

Model Number:XE370

Place of Origin:China

...drive teeth, guide wheels, track assemblies, U-shaped frames, knife Angle plates, well frames, bucket connecting rods, guard chains, tensioning cylinders, track plates, pins, bucket shafts, shaft sleeves, etc. Our company is equipped with advanced domestic

Brand Name:Fuchuan

Model Number:FC-630

Place of Origin:China

Blue Single Shaft Wire Take Up Machine 630mm For Bunched Copper Wire FC-630 active take up machine components: 1. Frame type pay off+ wheel type tension 2. 159 meter counter 3. 630single shaft take up machine: 1) Fit for bobbin 500 and 630mm 2) Fit for ...

Brand Name:RUIHUI

Model Number:(MAC2-300)

Place of Origin:Guangdong, China (Mainland)

... lines. It has two functions. One is to support the material by tensioning the inner diameter of the coil material; the other is to drive the material through the rotation of the main shaft of the rack. Feed into the follow-up machine (leveler or feeder).

Brand Name:Suntech

Model Number:DW2240A

Place of Origin:Zhejiang,China

...Tensioner Hydraulic Cable Drum Stand with Spindle Bar Hydraulic Lifting Jack Stand Apply to carrying cable reel. Feature:Hydraulic lifter with small wheels in the bottom for easy moving. Explain:Standard configuration,including shaft. 1. According to the lifting form, it can be divided into hydraulic cable release frame...

Brand Name:Vertical wire drawing machine

Model Number:DLL1000

Place of Origin:JIANGYIN CHINA

... tension control system. (2) Unify 250 cast-iron main frame, precision machinery, no shock. (3) Capstan treated with carbon fiber. (4) Suitable for continuous annealer, take up machine with and without shaft colier machine. Machine Features:Transmission

Brand Name:GOODPLUS

Model Number:GD-400

Place of Origin:CHINA

Fully automatic plastic shoes cover making machine Machine introduction: SJ2019 new model plastic shoes cover making machine is the ideal machine to make shoes cover. The machine frame can be iron and aluminium. Features: 1, High output, small volume ...

Brand Name:Beyde

Model Number:PN800-PN3150

Place of Origin:China

... load capacity : 15 tons 4.1.4. Tip diameter :Φ80/Φ140mm 4.1.5. Tension form : Pneumatic tension 4.1.6. Lifting motor power : 1.5kw/2 sets 4.1.7. Tightening motor power : 0.75kw/2 sets 4.1.8. Ф 1600- Ф 3150 end shaft paying off frame, the base is made

Brand Name:STT

Model Number:FXJ-2

Place of Origin:China

..., The coil stand is provided with pneumatic tensioner to make the wire tight when winding. Main Components: 1. Main frame 2. Shaft 3. Tensioner Main Parameters Typical standard specifications of FXJ-2 are shown below, however this can be easily modified as

Brand Name:LIYI

Place of Origin:China

...; 2. The installation method of retracting and unwinding coil material adopts air expansion shaft, which is marked with scale to facilitate loading alignment; 3. Automatic and manual tension control system is adopted to control the tension of winding and

Brand Name:CANGZHOU WILLING

Model Number:Heavy Hydraulic Decoiler

Place of Origin:CHINA MAINLAND

... drum and a braking device. The roll material of the hydraulic automatic decoiler rolls freely on the movable shaft seat of the left and right boxes to open the roll material. The steel plate advances to the leveling machine on the conveyor frame, which

Brand Name:FCM

Model Number:200T

Place of Origin:China

...designed to support the weight of the machine to reduce the tension on the track chain. It consists of a frame, a shaft, a bearing, and an idler roller. The frame is made of robust and durable material, and the shaft is made of high-strength alloy steel...

Brand Name:Turui

Place of Origin:Made in China

... frame with robust construction, the unwinder and rewinder are separate whole closed loop tension system, achieving precise and consistent tension control. The finished rolls rewind on differential shafts are perfect straight edge and right tension. It is

Brand Name:Hazemag

..., frame, bearing, hammer, blow bars, feeder, head centre, main shaft, main shaft sleeve, torch ring, fixed jaw, swing jaw, upper/lower edge plate, adjustment seat, adjustment block, toggle plate, tension rod, rack, tooth plate, fly wheel, eccentric shaft, ...

Brand Name:SSI

Model Number:SSI-M

Place of Origin:china

...a wheel on a shaft, designed to support the movement and direction change of tensioned cables, or the power transmission between shafts and cables. When the sheave is supported by a frame or shell, it does not transmit power to the shaft, but is used to ...

Brand Name:PingAn

Model Number:2850mm

Place of Origin:Henan, China

...tensioner of this toilet paper roll making machine is made by stainless steel. Frame is 304 stainless steel. Screw is 304 stainless steel. Rod is 304 stainless steel. And motor protective grade is IP55. The corrector of the toilet paper roll machine machine also is made by 304 stainless steel. The doctor frame and shaft...

Brand Name:ZTRFM

Model Number:002

Place of Origin:China

... machine work. A hydraulic uncoiler, which supports the rolling plate and provides tension to the steel strip, is composed of a frame, a main shaft, an expansion and contraction drum, and a braking device. a) Main frame: Made of forged and welded bearing

Brand Name:TONGYANG

Model Number:SS752-600

Place of Origin:CHINA TAIZHOU TONGJIANG

...action of centrifugal force, achieve the purpose of dehydration.Machine consists of stand, drum, main shaft, brake, electrical parts.Stand area from the base, frame, stents, shell and other parts.Shell is fixed on the frame, frame with three tension rod on