ns nj6 force moment sensor

Brand Name:NS

Model Number:NS-NJ6 series multi-component moment sensor

Place of Origin:CHINA

NS-NJ6 series multi component moment sensor 3 components / 6 components Range: Fxyz 1~10kN; 1~10kN; 5~50kN; Output: 0~5/10V, 4~20mA optional Accuracy: 0.5%F.S

Brand Name:Forsentek

Model Number:TFA

Place of Origin:China

...force torque sensor biaxial load cell for Torque/Thrust force measurement The TFA Torque and Thrust Bi-Axial Load Cell is designed to measure reaction torque moment in clockwise and counterclockwise direction as well as tension and compression loads, all in one transducer.Two wheatston full bridges deliver seperate outputs for applied torque and thrust force...

Place of Origin:CHINA

...Moment Indicator Spare Parts Weight Sensor Shaft Load cell pins can be used for static or dynamic force measurement and are widely used in many fields. Application: When using a wire rope pulley for load measurement, replace the original pulley shaft with a load cell. When measuring the pressure of the steel structure, the load cell is used as a forced connector. When measuring the force...

Brand Name:SeeLong

Model Number:SLZN-5/100

Place of Origin:China Luoyang

...Sensor 5N.m 0.5%FS High Speed Torque and Rotational Speed Measurer Product introduction Torque sensors are available for various rotations or detection of Torsional Moment Perception on Non-rotating Mechanical Components. Torque sensors convert physical changes in torsion force...

Brand Name:DAXIAN

Model Number:DX9028

Place of Origin:China

... head model wearing the safety helmet on the high-sensitivity force sensor, and then use a steel hammer with a mass of 5kg to impact from a height of 1m, and measure the force value at the moment of impact by the high-sensitivity force sensor device, so as

Place of Origin:China

Brand Name:CHENGFENG

... and penetration resistance of safety helmets. The aluminum headform wearing the safety helmet is mounted on a highly sensitive force sensor, and then impacted from a height of 1m using a 5kg steel hammer. The force value at the moment of impact is