npn pnp fiber optic detector

Brand Name:Fongko

Model Number:FKEQU-348

Place of Origin:Shenzhen

FONGKO Fiber Optic Tools High Quality Fiber Optic Detector Identifier KFI-35V with Visual Fault Locator Display relative optical power. Test online without interruption of the link. Recognize the signal of 270Hz, 1KHZ,2KHz. Comes with a hood to provide mor...

Brand Name:Luoshida

Model Number:LSD-C71

Place of Origin:China

Detection distance Flush 1mm/Non-flush 2mm Response time MARK mode 50 microseconds,C mode 130 microseconds Working temperature -10+55°C no freezing Output selection LIGHT-ON/DARK-ON(Switch Selection) Display Indicator Operation indicator: red LED, dual ...

Brand Name:KRONZ

Model Number:BFH-A10N

Place of Origin:Guangdong, China

... Fiber Optic Sensor Amplifier | 630nm Red LED | Ultra-Fast 50μs Response | Light/Dark Mode (LIGHT ON/DARK ON) | 4-Channel Mutual Interference Prevention Product Description Multi-Function Digital Fiber Optic Amplifier for Precision Detection | NPN/PNP ...

Brand Name:F&C

Model Number:FSCU1805-P/D R2M

Place of Origin:China

...Detector 12VDC Shielded 3 Wires NPN PNP M18 Proximity Switches Model Head size sensing range Output install Non-flushed or flushed FSCU0801-N/D M8 1mm NPN M8 connector flushed FSCU0802-P/D M8 2mm PNP M8 connector non-flushed FSCU1202-N/D M12 2mm NPN M12 connector flushed FSCU1204-P/D M12 4mm PNP M12 connector non-flushed FSCU1805-P/D M18 5mm PNP M12 connector flushed FSCU1808-P/D M18 8mm PNP...

Brand Name:KJTDQ

Model Number:KJT-AR4K

Place of Origin:Jiangsu,Chian

NPN No Nc Fiber Optical Sensor Amplifier with Ce Quality Quick details: Name: Ampifiler Output: PNP NO/NC, NPN NO/NC Specification Model KJT-A4RTK-N Power supply 12~24VDC Leakge current <60mA Voltage drop <1V ...

Brand Name:KNT

Model Number:KNT-VF1MW

Place of Origin:WUHAN

...Fiber Optic Visual Fault Locator Pen / Visual Fault Detector We use MWQ-LD as the emitting component of 650 series fiber fault locator. Driven by constant current source, the indicator can emit stable red laser. The product can be used to inspect fiber failure when they connect with optical interface and be inserted into single mode or multi mode optical fiber. It is indispensable tool in fiber project constructing, fiber...

Brand Name:Fujioptic

Model Number:Fuji-efins-001

Place of Origin:Wuhan, China

Fiber Optic Microscope / Integrated Fiber End Face Detector fiber optic inspector The 400X Fiber Microscopes are used for inspecting fiber terminations in the field. With their good optical performance and integrated laser safety filters, they provide the most critical view of fiber end faces. This renders scratches highly visible and is the clear choice for field termination in sensitive installations. 1.1 Fiber Endface Detector...

Place of Origin:China

Brand Name:CY COM

Model Number:in-line type

... Accuracy 4.Good end In-line type attenuator Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to

Brand Name:TTI Fiber

Model Number:FP-1

Place of Origin:China

...Fiber Optic Pigtail Simplex ST Excellent Mechanical Endurance Fiber Optic Pigtail Description: Fiber Pigtails is short optical fiber permanently attached to a source , detector or other fiber optic device at one end and an optical connector at the other . Fiber Optic Pigtail Features: Low insertion loss, high return loss Excellent mechanical endurance High credibility and stability Good in repeatability and exchangeability Fiber Optic

Brand Name:Hanxin or OEM

Model Number:650nm

Place of Origin:Shenzhen,China

...Fiber Optic Equipment Fiber Fault Detector For Patch Cord Testing Product Description: Table four channel red light source using 650nm laser as the light emitting device, the output power can reach 10mW; at the same time support four path fault detection..This product has the advantages of simple operation, can be used to do a visual test of optical fiber, optical cable, connector, when the measured fiber...

Brand Name:Takfly/OEM

Model Number:Attenuator

Place of Origin:Shenzhen, China

...Fiber Optic Attenuator Fiber Optic SC Attenuator: Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Takfly Fiber optic attenuator include bulkhead type optical attenuator, plug-in type type optical

Brand Name:GEZHI or OEM

Model Number:1x8 Multi-Channel

Place of Origin:China

... optical route. In optical fiber transmission system, it is used for multi light source/ detector selection, multi-channel fiber monitoring, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and

Brand Name:E-link

Model Number:LNK-DT001 Series

Place of Origin:China

...Optical Detectors For SFP & SFP+ Optical Transceivers , Fiber Optic Cable Detector Handheld Optical Detector Model: LNK-DT001 Series Overview This Handheld Optical Detector can test 125M -11.3G SFP, SFP+ DAC Cable, SFP+ AOC Cable, integrating optical power meter, bit-error rate tester, DDM Monitor and code board. What is Optical DETECTOR? Portable bit error rate tester (BERT) Portable optical...

Brand Name:FOCABLE

Model Number:SC/APC Fiber Optic Attenuator

Place of Origin:China

...Fiber Optic Attenuator 0dB to 25dB / single mode fiber attenuator​ SC Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. And it is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. The function of attenuator in fiber optic system is to reduce the optical power in the fiber...

Brand Name:YINGDA

Model Number:FPC-SC-OM3-09-2-A

Place of Origin:china

Fiber Optic Pigtail SC OM3 10Gigabit Aqua 50/125um 2 Meter LSZH G657A1 Mulitmode Fiber 0.9mm SC is short for square card, it can plug directly,easy to use, but also easy to drop out. SC Fiber Optic Pigtail is a component installed in a fiber optic transmission system that reduce the power in the optical signal. It is often used to limit the optical power received by the photo-detector to within the limits of the optical receiver. Optic...

Brand Name:ISOCHI

Model Number:HS-FV11P

Place of Origin:China

...Fiber Optic Amplifier HS-FV11P PCB Drilling Machine Part With Plastic Wire Descriptions: Brand Name: SOCHI Model: HS-FV11P Application: PCB Drilling Machine Output mode: NPN normally open Supply voltage: 12-24 V Color: Black Place Of Origin: China Lead Time: about 3 days after payment Features: 1.Industrial automation sensor 2.Fast response and precise positioning 3.Digital fiber amplifier 4.Optical fiber...

Place of Origin:China

Brand Name:OEM

...detector module, handheld detection, backpack detection, vehicle detection, UAV accessories, etc. Product Description FPV Drone Fiber Optic Cable Spools Introducing our Fiber Optic Cable Spool: a sophisticated and robust solution crafted for seamless storage and management of optical fibers...

Brand Name:ANC

Model Number:FC Male-Female Attenuator

Place of Origin:China

...Fiber Optic Attenuator 0dB Description: FC/UPC Male to FC/APC Female Fiber Optic Attenuator manufactured by ANC International Co., Limited is a component installed in a fiber optic transmission system that reduces the power in the optical signal. And it is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. The attenuation range of such fiber

Model Number:SC / APC Zirconia Fiber Optic Attenuator

Place of Origin:China

... the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. LC/PC, LC/APC, ST/PC, MU/PC, FC/PC, /FC/APC, SC/PC ...