non toxic release agent

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

... temperature stability, high degree of slip, and abrasion resistance of the release film are important. Lubekote 9502A is water-based mold release agent. It can be diluted. The dilution ratio depends on the application. Lubekote 9502A has less building up

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:China

...Release silicone spray 450ML Mold release agent/ silicone spray from factory directly Product Description 1.) It selected the modulation of high load, anti-extreme pressure, high wear-resistant compound raw materials, and selected premium non-toxic environmentally friendly products as the propellant; 2.) Good finishing of the product surface, not greasy, mold releasing for many times, cost savings. Mold release agent...

Brand Name:HSF

Model Number:36GSSNSi

Place of Origin:China

...applications where a release liner is required. This film is typically made from clear polyester (PET) that is coated with a non-silicon release agent on one side. Here are some common applications for clear PET non-silicon coated release film: 1. Labels:

Brand Name:LANSEN CHEM

Model Number:LSC-500

Place of Origin:CHINA

...Release Agent for Rubber Product Demolding Product Description: This product is a water-based calcium stearate suspension prepared via a proprietary process. As an outstanding anti-adhesive agent, release agent, and anti-sticking solution, it is ideally suited for rubber and plastic products. This is the LSC - 500 non - ionic calcium stearate white emulsion rubber release agent. As a specialized release agent

Brand Name:JT

Model Number:JT616

Place of Origin:HUBEI, CHINA

..., China Tel:+86-728-6201068 Fax:+86-728-6202066 Zip code:433132 2. HAZARDS IDENTIFICATION Flammable Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Brand Name:Hensen

Model Number:I75L

Place of Origin:Qingdao, China

... Mould Releasing Agent Release Graphite A Powder Mould Releasing Agent A release agent is an interface coating used on two surfaces that tend to stick to each other to make the surface easy to release, smooth and clean. Mold release agents are used in ...

Place of Origin:Hebei, China

Brand Name:yuhao

Model Number:Drain Cleaner Powder

High Quality Foaming Sink Drain Cleaner Powder Describe Using a non-toxic and eco-friendly formula with hard-working enzymes with heat-releasing properties, it effectively melts starch, protein, oil and grease trapped in drains or pipes. This product ...

Brand Name:Qiantai Chemical

Place of Origin:Guangdong, China

Non-Toxic Flame Retardant Test for Fabric Compound of Phosphate Ester and Various Components Product Description: Our Textile Finishing Agent is specially designed to enhance the flame retardant properties of non woven fabric, cotton fabric, and any other fabric materials that require flame retardancy. The finishing agent is made from high-quality materials that are non...

Brand Name:JOYWAY

Model Number:PU-7620

Place of Origin:China

Release agent PU-7620 Water base mould release agent for the shoe sole PU-7620 is a mixture of siloxane and silicone resin. Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be ...

Brand Name:Aristo

Model Number:AL7503

Place of Origin:China

... bearing capacity and strong extreme pressure & wear resistance. Odorless premium propellant leaves perfect surface of the product, without oiliness. Non- toxic and non-corrosive. Suitable for use as plastic mold release for ABS, PVC, PE, NYLON,

Brand Name:Lalkers

Model Number:TCS01

Place of Origin:CHINA

... Odors Non Toxic Foaming Toilet Cleaning Sheet Description 1. Material: Typically made from non-woven polyester or paper, these sheets are designed to withstand the heat of the dryer while effectively releasing their contents. 2. Softening Agents: Contain ...

Brand Name:Future

Model Number:20mm

Place of Origin:China

... with our NSF H1 registered metered aerosol valves. Designed specifically for food-grade lubricants, release agents, and sanitizers used in incidental food contact zones, these valves deliver a precise, measured dose exactly where lubrication is needed on

Brand Name:JUNHE

Model Number:1353

Place of Origin:Changzhou in China

...Release Agent / Zinc Phosphate Pretreatment 80-120 Zinc Stearate Release Agent Introduction Zinc Stearate Release Agent consist of organic acid, non-ion surface active agent and zwitterion free from phosphor and nitrogen. Bath solution compound: Put cold water into the tank till three-quarter with appropriate degreasing agent...

Brand Name:WENYOU

Model Number:WY-401

Place of Origin:CHINA

..., may cause lung injury,when the fire (such as cigrette)fuel burning goods heated over 250 degrees Celsius, will release potentially harmful smoke. Therefore, do no somke before spraying and wash your hards before spraying. Whether this material is

Brand Name:Xuntang

Place of Origin:China

... with food, and will not release any harmful substances. 2. The plasticizer, BPA, coloring agent and other substances contained in the plastic wrap film can cause harm to the human body, especially in the heating process, harmful substances are easy to

Brand Name:Jundao(Henan)

Model Number:Covering agent

Place of Origin:Henan China

Heat preservation Ladle covering agent For Steel Making Non-toxic Metallurgical material The ladle covering agent produced by our company has a mature process. The product is non-toxic, tasteless and less polluted; easy to use, no slag hanging, no sticking...

Brand Name:Guangzhou Xingjin Fire Equipment Co.,Ltd.

Model Number:40L/70L/90L/100L/120L/150L

Place of Origin:Guangzhou, Guangdong, China

...-friendly fire extinguishing agent specifically designed for use in a wide range of applications. It is a non-toxic, non-corrosive, and non-conductive agent with a zero ozone depletion potential. This system is able to discharge within 10 seconds