no drying polyurethane mold release agent

Brand Name:Lubekote

Model Number:9129

Place of Origin:China

...industry. Which has shown excellent performance in releasing polyurethane rollers and castors. Advantages: Easy to use No build- up No contaminating transfer Excellent release properties Excellent surface Application: Dilute the product with a solvent to a

Brand Name:JOYWAY

Model Number:PU-7620

Place of Origin:China

...silicone resin. Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be used in the Polyurethane and rubber field. It should be diluted into 20-25 time for the shoe sole production.

Brand Name:JINCHENG

Model Number:JCYB-153A

Place of Origin:CHINA

... release agents. It uses a specialized mechanism and nozzle to keep the powder suspended in the propellant stream and dispense it in an even, controlled cloud. This prevents clogging and ensures consistent ...

Brand Name:Tekoro

Model Number:TE-8049

Place of Origin:China

... applications, where post mould painting is not required. This product has a light duty silicone content and is a rapid dry, anti-stick mould release agent suitable for cold and hot moulds. It prevents sticking, which increases the life of does and moulds,

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:Guangdong,China

...release spray mold release agent aerosol mold release spray Art No. D0201 Body Surface Prevent Silicone Oil Spray Mould-Releasing Application: This spray silicone oil lubricant is formulated with silicone polymers dispersed in a quick drying solvent carrier. It creates a thin film between the polyurethane...

Brand Name:Hensen

Model Number:I75L

Place of Origin:Qingdao, China

...Releasing Agent Release Graphite A Powder Mould Releasing Agent A release agent is an interface coating used on two surfaces that tend to stick to each other to make the surface easy to release, smooth and clean. Mold release agents are used in a wide variety of molding operations including metal die casting, polyurethane foams and elastomers, glass fiber reinforced plastics, injection molded

Brand Name:JT

Model Number:JT616

Place of Origin:HUBEI, CHINA

... release effect high stability No reaction with the casting material Not corrode the mold Environment protection and without pollution Process: 1. Remove grease and wax thoroughly with solvent to ensure the mould cavity clean and dry 2. For the new mould,

Brand Name:Stoner

Model Number:8#

Place of Origin:The USA

...Mold Release Wax Agent For Composite FRP Demoulding # No. 8 V2.0-311g Basic information 1. Eco-Friendly 311g/can Dry Mould Release Agent/waxis a chemical used to prevent other materials from bonding to surfaces. 2. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release...

Brand Name:WENYOU

Model Number:WY-405

Place of Origin:CHINA

..., may cause lung injury,when the fire (such as cigrette)fuel burning goods heated over 250 degrees Celsius, will release potentially harmful smoke. Therefore, do no somke before spraying and wash your hards before spraying. Whether this material is

Categories:Polyurethane Additives

Country/Region:china

... are meticulously formulated to ensure a clean, easy release every time, minimizing defects and maximizing productivity. Designed for a wide range of elastomers, our products provide a thin, even coating that prevents adhesion to molds, preserving the

Brand Name:MC

Model Number:MC-PU70 AB

Place of Origin:CHINA

...Polyurethane Rubber For Making Molds Product Description Liquid polyurethane plastic casting resin consists of A&B component, B is curing agent, and A is polyurethane prepolymer. It can also be used as a concrete or cement stamping mold as well as for making hard durable rubber parts for machinery or automotive applications. Polyurethane casting plastics can be cast in silicone mold rubbers without any release agent...

Brand Name:CLLZY

Model Number:pva-005

Place of Origin:JIANGSU, CHINA

... prepared for production. This eliminates the need for drying time and reduces the risk of application errors. PVA film provides consistent thickness and reliable performance, ensuring a high-quality final product. Characteristics: Efficient Mold Release:

Brand Name:Tunsing

Model Number:DS1901

Place of Origin:China

...Polyurethane Adhesive Film For Silicone Products Product: DS1901 Description: This kind of hot melt adhesive film for liquid (solid) silica gel high temperature vulcanization molding process has a stable adhesion, and the rubber film and silica gel treatment agent is not toxic, no foaming, no stratification and other characteristics. Composition: Polyurethane Physical Characteristics: Color Transparent Release...

Brand Name:Chang Feng

Model Number:CF-23

Place of Origin:An Ping China

...molding is as follows: first spray release agent on the upper and lower molds of the skin molding mold, and then spray in mold paint on the surface of the lower mold, which can be sprayed with in mold paint of different colors. Then set the mold and pour two-component polyurethane raw materials, and start the mold

Model Number:1204

Place of Origin:China

....SMC is a kind of semi-dry method of manufacturing glass fiber reinforced thermosetting products moulded the middle material, composed of unsaturated polyester resin, low shrinkage/low profile additives, initiator, release agent, such as mineral filler in