multimode optically controlled optical attenuator

Brand Name:YOUCii

Model Number:U8748

Place of Origin:CHINA

... of multi-channel design, precise control of optical signal and high reliability. The 8-channel multi-mode optically controlled optical attenuator integrates eight independent optical attenuator channels, each of which supports multi-mode fiber and is

Brand Name:FOCABLE

Model Number:MU/UPC Fiber Optic Attenuator

Place of Origin:China

..., FC attenuator, SC attenuator, LC attenuators and ST attenuator. The attenuators can be female to female which is called bulkhead fiber optic attenuator or male to female which is also called a plug fiber optic attenuator. Bulkhead and plug types are

Place of Origin:China

Brand Name:TTI Fiber

Model Number:FA-LC

...Optional Return Loss PC≥50dB, APC≥60dB Wavelength 1310nm or 1550nm Attenuation Range 0 - 30 dB Description: Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed.

Brand Name:Haiyu Optical

Model Number:HYG-ATU-LC-002

Place of Origin:China

....5/125 applications. Our Male to Female Buildout Optical Attenuation are available in all fiber modes with LC, LC/APC SC, SC/APC, FC, FC/APC and ST types. The LC Air-Gap Variable Attenuator has a ceramic alignment sleeve. Can be used on both multimode and

Brand Name:Qingying or QY

Model Number:LC APC Fiber Optic Attenuator

Place of Origin:China Dongguan

... loss v Readily panel mountable v Compact packing Specification : parameter SM(9/125) MM(50/125,62.5/125) Attenuation values 1dB to 15dB(1dB step) 1dB to 15dB(1dB step) Wavelength 1310nm & 1550nm 850nm &1300nm Attenuation Tolerance (dB) 1

Brand Name:FOCC

Model Number:FOCC-ATT003

Place of Origin:China

.... The products are available by both single mode and multimode versions, single mode SC have two types, one is SC UPC and the other is SC APC, multimode only has SC UPC connectors. They fit typical 1310nm and 1550nm single mode fiber applications.

Brand Name:Wangtong

Model Number:SC Type Fixed Optic Fiber Attenuator

Place of Origin:Guangdong, China (Mainland)

... Attenuator is used in applications where a pre-determined amount of light loss is specified.We offer LC,FC,SC,ST,MU fixed attenuator with different attenuation level, from 1dB to 30dB. We also can supply Fiber Pigtail, Fiber Patch Cord, Fiber Adapter,

Brand Name:GaPho

Model Number:Fiber Optical Attenuator

Place of Origin:China

...Optical Attenuator Optical fiber attenuator is a kind of optical device which can reduce the energy of optical signal. It is used to attenuate the input optical power and avoid the distortion of the optical receiver due to the strong input optical power. As an optical passive device, optical fiber attenuator is used to debug optical power performance in optical communication systems, calibrate optical fiber instruments, and attenuate

Brand Name:Geehe or OEM

Model Number:Optical Pad Attenuator, Bulkhead Attenuator

Place of Origin:Wuhan, China

...% tested in factory Environmentally stable Manufactured with metal-ion doped Contaminant and scratch free ferrule upon request Multimode attenuators available Product Description Optical pad attenuators are built with metal-ion doped optical fiber and are

Brand Name:FURONG

Model Number:Fiber Optic Attenuator

Place of Origin:Guangdong, China

...Attenuator Optical Variable Attenuator Quick Detail: Name: SC Fiber attenuator Mode: Singlemode, Multimode PC, UPC, and APC polish types optional Type: Fixed, Female & male, In-line, Variable Attenuation value: 1dB~30dB Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm Description: Fiber Optic Attenuator...

Brand Name:New Light

Model Number:FC / ST / LC / SC / MPO

Place of Origin:China

... where a reduction in power is needed. We supply various kinds of fiber attenuators, including LC, SC, and ST, FC, and Variable fiber optic attenuators. Features : Fixed Attenuator(Fixed Type FC, SC, ST, LC) Female to male type ( FC, SC, ST, LC) In

Brand Name:YT

Model Number:SC APC Singlemode Fast Connector

Place of Origin:china shenzhen

... or male to female which is also called a plug fiber optic attenuator. Fiber optic attenuators can be designed to use with various kinds of fiber optic connectors. the attenuators can be female to female which is called bulkhead. fiber optic attenuator or

Brand Name:CY COM

Model Number:SC Female to male

Place of Origin:Shenzhen China

...Optical Variable Attenuator Introduction: Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Features: Low back reflection and Low PDL High precision attenuation value Precision control of attenuation...

Brand Name:Gezhi or OEM

Model Number:optical FVOA -AA

Place of Origin:China

... by a linear moveable ND filter. They are used to permit dynamic control of optical power levels in a fiber and can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or

Brand Name:CY COM

Model Number:SC Female to male

Place of Origin:Shenzhen China

...Optical Variable Attenuator Introduction: Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Features: Low back reflection and Low PDL High precision attenuation value Precision control of attenuation...

Brand Name:CFO

Model Number:Attenuator

Place of Origin:China

...Optical Fiber Attenuator M - F 2db / 10db Attenuator With Metal Sleeve 1. Fiber Optic Attenuator: Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical...

Brand Name:KEXINT

Model Number:Fiber optical attenuator

Place of Origin:CHINA

... for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation form 1dB to 65dB.It is design under the

Categories:Fiber Optic Accessories

Country/Region:china

...Optic Attenuatorr Fiber optic attenuator as a kind of optical passive device is used in optical communication system, debugging the optical power and the calibration correction of optical instrument, attenuating fiber optic signal. It is made of attenuated fiber which includes metal ion and can adjust the light power to the required level. Optical fiber communication systems, optical fiber CATV and high power optical...

Brand Name:HILINK

Model Number:HL-Atte-LC-XX

Place of Origin:China

Attenuator LC UPC 10dB Simplex mode fiber optic Attenuator LC Attenuator Features Attenuation is 5dB or 10dB FC, SC, ST, LC.... Connector Single mode fiber Precision ceramic ferrule Plastic or metal housing material Low back reflection and Low PDL Precision control of attenuation range Application Fiber optical telecommunication system Fiber optical CATV Fiber optical...