mola high temperature molybdenum round bar

Brand Name:HMD

Model Number:NONE

Place of Origin:CHN

...% Density: >=10.1g/cm3 Dia: 1.0-120mm Surface: Polished, ground, cleaned, black. Standard: ASTM B386 TZM and Mola rod chemical Composition is: TZM rod: Mo + 0.40-0.55%Ti + 0.06-0.12%Zr + 0.01-0.04% C

Brand Name:Bao Steel

Model Number:1.2316 420

Place of Origin:China

... strengthened nickel-base superalloy, below 980 ℃ with good resistance to corrosion and oxidation resistance below 800 ℃ with high strength, below 540 ℃ has good resistance to relaxation properties, but also has good formability and weldability. the

Place of Origin:Suzhou, China

Brand Name:AIWEN

Model Number:SH-ASTM A453

...High Temperature Alloy Round Bar Equal grades of ASTM A453/A453M grade 660: GH2132/UNS S66286/ DIN1.4890 A453 Gr.660 is widely used in applications with temperature below 650°C, where high yield strength and creep strength required. Also it has satisfying welding performance Features of ASTM A453/A453M Gr.660 High Temperature Alloy Round Bar: High yield strength and creep strength Satisfying welding performance High

Brand Name:DINGSCO

Model Number:According to customers' requirements

Place of Origin:China

High-Temperature N08810 Round Bar | Nickel Alloy Incoloy 800H Rods N08810 round bar is a nickel-based high-temperature alloy, also known as Incoloy 800H or Alloy 25. It is mainly composed of nickel (Ni), chromium (Cr) and iron (Fe), with small amounts of carbon (C), manganese (Mn), silicon (Si), copper (Cu), aluminum (Al) and titanium (Ti). This composition design makes it have both high-temperature...

Brand Name:FGD

Model Number:fdg m-001

Place of Origin:Henan, China

High Purity 99.95% Pure Moly Molybdenum Bar Rod Molybdenum rod Our products are high-purity powder, featuring less impurity content in bar blanks, high sintering density and large deformation of the forged finished products. We lay emphasis on the control...

Brand Name:TESTE

Model Number:304、316、310 ,201,321,430

Place of Origin:Shandong China

Product Description: Stainless Steel Bars - Durable and High-Strength Round Bars The Stainless Steel Bars are a type of durable and high-strength steel bar that is widely available in the market. These round bars are made from stainless steel, which is ...

Brand Name:Sanhui

Model Number:TZM

Place of Origin:China

High Temperature Dia 0.3mm Molybdenum Lanthanum Wire MoLa Molybdenum Alloy High temperature molybdenum is also known as lanthanum molybdenum alloy sheet, Mo-La or ML sheet.By doping lanthanum oxide into pure molybdenum, the recrystallization temperature...

Brand Name:Hypersolid Metal

Model Number:Molybdenum Bar

Place of Origin:China

...Bar different length factory price molybdenum rod electrode for sale Diameter & Length According to your drawings Grade Mo1 Material 99.95% Molybdenum Technological process Pressing, Singtering, forging, maching Application Electrode, Lighting, Furnace parts and High temperature...

Brand Name:Unite Steel

Model Number:Round bar

Place of Origin:China

... - molybdenum high hardenability high tensile steel - generally supplied hardened and tempered in the tensile range of 930 - 1080 Mpa (condition U) - (Rc 28 - 36). Characterised by high strength and toughness in relatively large sections. Pre hardened and

Brand Name:CF Steel

Model Number:SAE4140/SCM440/1.7225/42CrMo

Place of Origin:China

Alloy Steel Round Bar 42CrMo/SAE4140/SCM440/1.7225 For Mechanical Product Introduction SAE 4140 alloy steel is chromium, molybdenum, manganese containing low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and ...

Brand Name:DELTA

Model Number:GH2132

Place of Origin:China

...High Temperature Alloy Steel Bar Round Bar Heat Resistant Nickel Base Alloy Rod Form Nickel Alloy Bars Grade GH2132 Outer Diameter 6mm-300mm or according to customer’s requirement Length custom cutting any length as request Standard ASTM, ASME, EN, JIS, DIN, GB/T, etc Process Method Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar...

Brand Name:takford

Model Number:M2/1.3343/SKH51

Place of Origin:CHINA

DIN 1.3343/SKH51/M2 Hardening High Speed Steel M2 is a molybdenum type high speed steel, which has the advantages of low carbide inhomogeneity and high toughness.It is easy to overheat, so the quenching temperature should be strictly controlled.Due to its ...

Brand Name:Zhenfang

Model Number:ZF0146

Place of Origin:China

high wear resistance cemented carbide rods, tungsten rod, molybdenum bar Detail Production Information: Key Features: 1. High melting point (3410°C) 2. low thermal expansion 3. High resistance 4. Vapor pressure is low 5. Good thermal conductivity 6. High ...

Brand Name:Lanshuo

Model Number:LSW-160

Place of Origin:China

...high frequency steel round bar induction heating machine for forging 1. How to choose induction heating equipment? Different heating processes require different frequencies. If the wrong frequency selection cannot meet the heating requirements, such as slow heating time, low work efficiency, uneven heating, and temperature...

Brand Name:TOBO

Model Number:alloy b-3

Place of Origin:China

Hastelloy B-3 Forged/Forging Round Bars (UNS N10675, 2.4600, Alloy B-3) Product Description Inconel 625 Chemical composition Alloy % Ni Cr Mo Nb+N Fe Al Ti C Mn Si Cu P S 625 Min. 58 20 8 3.15 Max. 23 10 4.15 5 0.4 0.4 0.1 0.5 0.5 0.5 0.015 0.015 Inconel ...

Place of Origin:Baoji

Brand Name:huaheng titanium

Model Number:HUAHENG002

Molybdenum Sheet 1.thickness:0.1mm-80mm wideth:10-700mm length:30-3000mm 2.Purity:99.95%, 99.97% 3.Grade:Mo-1,TZM,Mo-La 4.Standard:GB, ATSM, DIN 5.Surface:black,C.C,bright Product Name Molybdenum sheet Tensile strength 610 Mpa Elongation ≥10% Purity ≥99.95...

Brand Name:Changsheng

Model Number:ASTM B348

Place of Origin:China

Introduction Titanium rods are the primary raw material for producing titanium alloys and pure titanium metal. They feature low density, high strength, excellent corrosion resistance, and good thermal and mechanical properties. Titanium rods are widely ...

Brand Name:Haiwo

Model Number:E235

Place of Origin:CHINA

...High Carbon Steel Round Rod Bar Hot Rolled MS Mechanical Alloy Steel Carbon rod is a non-metallic product. As a necessary cutting consumable before welding in the carbon arc gouging cutting process, it is made of carbon and graphite plus appropriate adhesive through extrusion forming, and then plated with a layer of copper after baking at 2200 ℃. It has high temperature...

Brand Name:zhongxin

Model Number:Alloy steel

Place of Origin:CHINA

GH1015 iron-nickel-based superalloy overview GH1015 is a solid solution strengthened iron-nickel-based superalloy. It contains a high amount of chromium to ensure satisfactory anti-oxidation performance. The total amount of tungsten, molybdenum, niobium...

Brand Name:PRM

Model Number:custom

Place of Origin:China

... ribbon is mainly to obtain the corresponding mechanical properties. Its main processing processes include bending, spinning, stretching, punching, etc., so that it can be used under high temperature and low temperature conditions, and its properties are