mechanical strength test device

Brand Name:HJ

Model Number:AM0006

Place of Origin:China

... shaft torsion testing machine Torsion speed 1-720°/min Mechanical Strength Test Applicable standards: GB/T 10128-1998 "Metal torsion test method at room temperature" GB/T 10128-2007 "Metal torsion test method at room temperature...

Brand Name:Sinuo

Model Number:SN2129A

Place of Origin:China

... assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its mechanical strength. Usage environment: Power supply:

Brand Name:HongCe

Model Number:SH-9

Place of Origin:China

...5J Mechanical Strength Test Device Product Introduction This vertical impact test apparatus is designed and manufactured according to the standard requirement of IEC60068-2-75 Test Ehc.. It is used to test the enclosure mechanical strength of the household...

Brand Name:Sinuo

Model Number:SNQC1014

Place of Origin:China

...used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle is that the free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both

Brand Name:kingpo

Model Number:KP-NS55

Place of Origin:china

...ch are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the ...

Brand Name:Pego Group

Model Number:PG-BMS

Place of Origin:China

...Equipment for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechanical strength test by simulating the ...

Brand Name:KingPo

Place of Origin:China

...-STD-883E, MIL-STD-810F, ISTA, UL Also meet standard JESD22-B104 (condition B: 1500G, 0.5ms). Shock testing systems Applications:

Brand Name:Lonroy

Model Number:LR-A083

Place of Origin:China

...fabrics (using the Elmendorf method) is carried out to test the impact tear strength of textiles, woven fabrics, non-woven fabrics, and coated fabrics. It can also be used for the burst strength tests of silk, cotton fabrics, various papers, cardboard, and

Brand Name:Kinte

Model Number:WH-8625

Place of Origin:Guangdong,China (Mainland)

... terms and requirements. Mainly used for household and similar electrical products shell, lever, handle, knobs, lights and other mechanical strength test. Mass of impact: 250 g, cone mass: 60 g, impact energy: 0.2, 0.22, 0.35.0.5, 0.7, 1, 2 (J)

Brand Name:TONY

Model Number:TW-201

Place of Origin:China

...Strength Testing Device For Toys Surface Impact Testing With BS EN 71 Test Purpose: Reduce the material damage or the danger of imitation toys protection devices as the real face. Application range: Range: imitation protect device (clear material protector, headpiece ,cap, blinker) Comply with Standards: EN 71-1 8.7 impact test...

Brand Name:Shice

Model Number:SC-BS-F2

Place of Origin:China

...Mechanical Strength Test On Resilient Covers Fig2 BS1363 Technical Parameters: Applied force 230-240N Metal test pressure block R angle of 2.0 to 2.5, width of 25.0 to 25.2 Hardwood block According to BS1363.1-2018 in Figure 2b Product Introduction: The device...

Place of Origin:China

Brand Name:KeRang

...portable socket-outlet which is equipped with flexible cable. Test principle: fix the free end of soft to the wall, the fixed point is of 750 mm height from the ground, grasp the specimen to make the ...

Brand Name:JLX

Model Number:LX-3602

Place of Origin:Made in China

BS 1363 Figure 2 Apparatus for Mechanical Strength Test on Resilient Covers 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to BS 1363 standards. And the mainly ...

Place of Origin:China

Brand Name:CHENGFENG

Product Introduction: It is a professional application for the detection of adhesives, adhesive tapes, self-adhesives, medical patches, protective films, release papers, composite films and other products, and can also be used for peeling, pulling off ...

Brand Name:ASLi

Model Number:SS-5 / SS-25 / SS-100

Place of Origin:China

...Mechanical Impact Test Device SS Series Mechanical Acceleration Shock and Impact Test Machine application: Mechanical Acceleration Shock and Impact Test Machine is mainly used for small products for impact test, to assess the product’s ability to withstand shock damage. It is often used in electronic components, electronic circuit boards and other environmental testing. Mechanical Acceleration Shock and Impact Test...

Brand Name:wangtebei

Place of Origin:China

...Strength Testing Machine , Hydraulic Mechanical Testing Machine 1.introduction WEW-1000 1000KN 100 ton hydraulic mechanical testing machine,tensile strength testing machine adopts underneath type hydraulic cylinder, which is installed at the bottom of the main machine, running stably; upper and lower jaw base are open structure, easy to clamp specimen WEW-1000 1000KN 100 ton hydraulic mechanical testing...

Brand Name:LABTONE

Model Number:G-HSKT10M

Place of Origin:CHINA

...semiconductor devices to withstand moderately severe shocks resulting from suddenly applied forces or abrupt changes in motion encountered during mishandling, improper transportation, or field operation. Shocks of this type can cause devices to degrade in

Brand Name:LIYI

Model Number:H-300D

Place of Origin:Dongguan

..., bending, shearing etc. test for metal materials. Attached simple accessories and devices, it can be used to achieve many kinds of mechanical performances. 2. The oil cylinder is at the bottom of the load frame, tension space is at the upside of the

Brand Name:DAXIAN

Model Number:DX8393

Place of Origin:China

DX8393 Wire and Cable Two Three Wheel Bending Testing Equipment 1, Applicable scope: Mainly suitable for measuring the mechanical strength of PVC insulated cables or rubber insulated and extra flexible wires with a rated voltage of 450/750V or below, and ...