manual operation cold bend test apparatus

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... cross-section having an external diameter up to and including 12.5 mm and for sector-shaped cores when it is not possible to prepare dumb-bells. Cable Testing Equipment If required by the standard for the type of cable, the test shall be

Brand Name:HeJin

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Pego Electronics

Model Number:PG-CBT

Place of Origin:China

... clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94, for bending test at low temperature for insulation of cable. The cold bend test is applied to the cores of circular cross-section having an external diameter up to and including 12.5mm,

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending...

Brand Name:Sinuo

Model Number:SN2307

Place of Origin:China

Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 Product description: This device is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. According to the standard IEC60811-1-4 clause 8.1 and 8.2, common test...

Place of Origin:China

Brand Name:KeRang

Cold Bending Test Machine HDX1307 Our company has a core team with years of technology development, technology transfer, technical consulting, technical services experience, providing Appliance Test Equipment, Medical Device Testing Equipment, Waterproof ...

Brand Name:ZL

Model Number:ZL-7039

Place of Origin:China

...Bending Test Machine/Cold Resistance Bending Leather Testing Machine Specifications: 1. Testing the resistance of bending of finished shoes 2. Easy operation Product usage: Finish Shoe or Sole Flexing Test Equipment is suitable for testing the soles, finished shoes to the resistance to bend nature, or check the location and extent of cracking in order to improve product quality. Specifications: Bending...

Brand Name:Delta

Model Number:CBA-II

Place of Origin:China

... Manual Type Circuit Breaker Test Equipment adopts micro controller unit(MCU) to control the testing process. CBA-II High Voltage Vacuum Type Circuit Breaker Test Apparatus is intelligent, multi-functional, accurate, stable, portable, easy to operate, etc.

Brand Name:MIYU

Model Number:MY-EIA-C3

Place of Origin:China

...bending tester ( MY-EIA-C3) with competitive price, both OEM and ODM available from us Technical Specification 1. Test Station 3 (Independent Operation) 2. Count the number of times of wire breakage and power failure saving tests 3. The number of times can be set in the range of 0-999999 times and can be manually set arbitrarily. 4. The bending...

Brand Name:PTE

Model Number:HUT-600C Hydraulic Servo Universal Testing Machines, steel strand type, Manual operation box

Place of Origin:China

...: The HUT-2000B series of microchip controlled Electro-hydraulic servo universal testing machines is mainly designed for tension, compression, bend, shear on metal, and non-metal materials. This product series features a bottom-mounted hydraulic cylinder;

Brand Name:iqualitrol

Model Number:SHB-3000D

Load Cell Control Brinell Hardness Tester with 20X Digital Measurement Microscope Download Technical Data: iqualitrol Brinell Hardness Tester SHB-3000D Download Operation Manual: iqualitrol SHB-3000D Operation Manual Brief Introduction: SHB-3000D Digital ...

Brand Name:MORITA

Model Number:QR-XQY-2

Place of Origin:CHINA

Intelligent moulding sand strength tester manual operation QR-XQY-2 Mainly used for measuring the compressive, shear, bending, tensile strength, and actual force output of type (core) sand at room temperature (or hot state). It can also be used to ...

Brand Name:Btutest

Model Number:BTU-HOFT

Place of Origin:Made in China

Hand Operated Flow Table Cement Testing Equipment Standard: ASTM C230 BS 4551-1 EN 459-2 EN 1015-3 EN 13279-2 Description: Used to determining the consistency of mortar & building line. Offering ASTM & EN standard, manual & motorized. A specimen contained...

Brand Name:Shengtai instrument

Model Number:SH0308B

Place of Origin:CHINA

SH0308B air release value tester adopts advanced 32-bit MCU, 7-inch large screen LCD display, has the advantages of stable and reliable, simple operation and easy maintenance. Applicable to SHT 0308-1992 "Lubricating oil air release value determination ...

Brand Name:SHC

Model Number:SC-DJR

Place of Origin:China

... for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the

Brand Name:AISRY

Model Number:ASR-5025B

Place of Origin:China

... time show the conductor resistance of the wire, the test material bending broken line, and can automatically stop operation. Characteristics This machine is driven by electric speed motor, which runs smoothly and has low noise. The key components are

Brand Name:TH

Model Number:WAW-600G

Place of Origin:BEIJING, CHINA

...Testing Machine Advanced 60-ton hydraulic universal testing machine designed for tensile, compression, bending, and shear tests in scientific research and industrial applications. Product Overview This high-precision testing apparatus features dual control systems combining manual operation...

Brand Name:FMS

Place of Origin:China

...e manual bending machine, hydraulic bending machine and CNC bender. - High accuracy, high efficiency, simple and convenient operation, good performance. Equipment Detailed Parameters: No. Main parameter 1 Suitable to process color steel plate, steel plate,

Brand Name:SUNTECHMACH

Model Number:STB50

Place of Origin:HANGZHOU, CHINA

.../T 3091,DIN 2440,EN 10255,BS1387 standards. ● These benders are ideal for plumbing, sanitary and heating installation on construction sites, for apparatus and boiler making and for industrial applications. Model No.: STB50 Capacity: 1/2

Brand Name:ASLI

Model Number:ES-20

Place of Origin:CHINA

...Test Equipment is a highly reliable and accurate testing apparatus, designed to provide precise vibration tests for a wide range of products. The device features a 1000mm*1000mm test table for placing the items to be tested, and it can provide vibration frequencies of up to 1500Hz. The test results can be monitored and displayed on the LCD screen, and the device can be easily operated through either manual