manual iec test equipment

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Brand Name:HJ

Model Number:HX9804

Place of Origin:China

Mandrel Test Device IEC Test Equipment 150N Test Force Manual Control Standard: IEC 61558-1 ‘Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests’ clause 26.3.4; IEC 60065-1 ‘Audio, ...

Brand Name:KINGPO

Place of Origin:China

...standard of GB1444-2008 clause 5.3 and Figure 4, it is used for impact resistance test of the lamp holder insulating shell. The test apparatus consists basically of a pendulum rotating at its upper end in such a way as to be kept in a vertical plane. The

Brand Name:SHC

Model Number:SC-FZ01

Place of Origin:China

...equipment testing IEC test equipment Product overview: This load box is designed and manufactured according to IEC60884, IEC61058, IEC606691 standards and etc. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test...

Brand Name:kingpo

Model Number:KP-SH06

Place of Origin:china

Spring Impact Hammer For IEC60068-2-75 IEC Test Equipment Standard: IEC 60068-2-75 Environmental testing –Part 2-75: Tests – Test Eh: Hammer tests. IEC 60065, IEC60335-1, IEC60598-1 and etc. Feature: The construction consists of a moving hammer head...

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:Kejian Kinsgeo

Model Number:KJ-C002

Place of Origin:Dongguan China

Manual Automatic 9N Head Pressure Manual Textile Testing Equipment Crock Fabric Product descruiption: For rubbing fastness tester of cotton, chemical fiber, blended and other colored fabrics and leather dyeing, and AATCC standard test. Applicable industry...

Brand Name:LY

Model Number:LY-6003A

Place of Origin:Dongguan

0.1mm Precsion Manual Adhesive Testing Equipment / Sample Cutter For Tape Uses : The machine is suitable for adhesive tape, protective film, from type membrane products and so on . Specification : Sample ...

Brand Name:Kinte

Model Number:Wh-8804

Place of Origin:Guangdong,China (Mainland)

... for testing the withstand voltage of power plugs in the item of protection against electric shock and mechanical strength. The test method is to apply the weight required in the standard plug or socket, after a certain period of time, the power plug or

Brand Name:GAOXIN

Model Number:GX-6060-A

Place of Origin:China

JIS / UL / ASTM Manual Rubber Testing Equipment Machine Rubber Tester Specifications: Cutter as per CNS , JIS , ASTM standands Dimension Ø41 × H 72cm Weight 60kg Detail picture:

Brand Name:YUYANG

Model Number:YYGZ-Z38

Place of Origin:CHINA

Automatic Manual Textile Testing Equipment Wet Resistance Anti Water Disc Sample Fabric round sample cutter / Gsm cutter, round sample cutter can cut various fabric samples such as 100 cm2 for Matindale test. By stretching action, round fabric samples wit...

Brand Name:YUYANG

Model Number:SPT-I

Place of Origin:China

...Test Apparatus Softening Point Tester for Bitumen Summary The softening point test equipment is designed and made as per GB/T4507 Standard Test Methods for Softening Point of Petroleum Asphalt of National Standard of People’s Republic of China , T0608 Asphalt Softening Point Test (Ring-and-Ball Apparatus) in the industrial standard of People’s Republic of China JTG E20-2011 Standard Test...

Brand Name:PEGO

Model Number:PG-TP1

Place of Origin:China

Test Ball Test Sphere with Diameter 50mm and 12.5mm for IP1X and IP2X Testing Test Probe 1 (500g steel sphere) Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is ...

Brand Name:AI

Model Number:KV-R5

Place of Origin:China

ASTM D445 Manual and Cheap Kinematic Viscosity Tester Summary This tester is suitable to determine kinematic viscosity of petroleum products. Principle:Under certain constant temperature,measure flow time of liquid with specified volume through one ...

Brand Name:GENY

Model Number:YC1893D

Place of Origin:CHINA

... electronic meters. Built for efficiency, accuracy, and compliance with IEC standards. Highlights Compatible with all meter types: Mechanical, electromechanical, and electronic. Flexible operation: Automatic, semi-automatic, or manual modes. Lightweight &

Brand Name:Sinuo

Model Number:SN1112D

Place of Origin:China

...Test Equipment Complied Standards & Clauses IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. Equipment Overview The Tinsel Cord Bending and Snatch Test Equipment is designed and manufactured according to the standard requirement of IEC 60227-1 clause 5.6.3.2, 5.6.3.3; IEC 60227-2 clause 3.2, 3.3; and etc. It is used to test...

Brand Name:LABTONE

Model Number:EV210

Place of Origin:Dongguang, China

Vibration Test equipment Complies With IEC 60068-2-6 and IEC 60598-1 Standards Vibration Test Equipment Manufacturer : Labtone Test Equipment Vibration Test Equipment standards : MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc. Model EV340 EV350 ...

Brand Name:Sinuo

Model Number:SN2116

Place of Origin:China

...IEC 60335-1 Annex H, IEC60065:2014 clause14.7 and clause 15.1, IEC 60884-1 2013 clause 20, 21, IEC 61058-1, IEC60669-1 etc. The test equipment has 3 synchronously work stations, which can test 3 linear switches, or 3 plugs or 3 sockets at the same time.

Brand Name:ASLI

Model Number:ES-20

Place of Origin:CHINA

...test equipment ES-20.pdf 2000kg.F Force Vibration Table Test Equipment for IEC 60335-2-24 and IEC 60335-2-40 high frequency vibration test machine is mainly used for product vibration and shock environmental test environment, environmental stress screening test, reliability test, tests may be needed to do for aerospace, communications, electronics, electrical, communications, home appliances and other areas of the products. It is a test

Brand Name:Haida

Model Number:HD-E710

Place of Origin:China

...Test IEC ip3 ip6 Tait Standards IP Test Equipment​ Water Spray Test Chamber.pdf Description: MIL - STD WATER IP Test IEC ip3 ip6 Tait Standards IP Test Equipment​ used to test anti-rain and waterproof performance for products, the products such as steam locomotive lamps, wiper performance, waterproof bands, motorcycle instruments, defense industry, navigation systems, missiles, radar cone top, aerospace industry,IEC...