lower safety inside bop valve

Brand Name:MIROC

Place of Origin:China

...connected with the added drilling tools as soon as possible, when the blowout is happened during lifting the drilling tools, the inside blowout preventer has many advantages such as high-pressure, sealed reliable, easy to operate, switch quickly and so on.

Model Number:All size

Place of Origin:China

4 1/2 IF 10000 Psi Inside BOP Valve, Inside Blowout Preventer (IBOP) Product Description INSIDE BOP Inside BlowOut Preventer (IBOP) is a special tool, which can be stripped through the BOP preempt to be connected with the added drilling tools as soon as ...

Brand Name:ATO

Place of Origin:China

... BOP Valve connected with drill string can protect swivel, hose and stand pipe. It can also be used as a releasing tool to make the valve opening usually and allows the backflow through. This optional release tool is installed in the float valve and the

Brand Name:ZZ TOP OIL TOOLS

Model Number:BOP Safety Valve

Place of Origin:China

...BOP Safety Valve / Fail Safe Safety Valve SSV- Super Safety Valve The Super Safety Valve is a Fail Safe Safety Valve for testing from a land or jack-up rig. It is normally run inside or below the Blow Out Preventer (BOP) and is used to control well flow. Its ID is 3.0 in., OD is 8.0 in., and its working pressure is 15,000 psi. This valve has a port for chemical injection downhole or to control a subsurface safety valve...

Brand Name:TR Solids Control

Model Number:TRDXS

Place of Origin:Xi'an China

...used for top drive drilling system with joined one by one. It is hydraulically operated and manually operated control valves in top drive circulating system, and special use for drill stem inside blowout emergency. It has a pressure rating of 10,000psi or

Brand Name:TOBO

Model Number:/

Place of Origin:China

...Valve Safety Relief Valve Adjustment of opening pressure: ① Before leaving the factory, the opening pressure of the safety valve should be adjusted one by one to the setting value required by the user. If the user proposes a spring working pressure level, it should generally be adjusted and shipped according to the lower limit value of the pressure level. ② Before installing the safety valve

Brand Name:ENCKE

Model Number:VCP273

Place of Origin:Mainland

... limits. The three outside spring rods keep the external ring-shaped lid firmly closed as long as the force generated by the pressure inside the silo does not overcome the spring force. Once the pressure exceeds the pre-set value the lid is pushed up and

Brand Name:Lake

Model Number:All models

Place of Origin:China

API Kelly cock valve 35mpa 75mpa 105 mpa Product Description Kelly valve is a manually operated ball type drill stem valve; it is divided into upper Kelly valve and lower Kelly valve. The upper Kelly valve is connected between lower end of swivel and upper...

Brand Name:Techcore

Model Number:SSV8150012

Place of Origin:CHINA

... stem testing operation to control the well flow. So during the downhole operation, the BOP safety valve is the fail safe safety valve. Design Features of BOP safety valve The BOP safety valve includes a new ball mechanism that has a 3.0 inch ID and the

Brand Name:Techcore

Model Number:Super Safety Valve

Place of Origin:China

...Safety Valve For Drill Stem Testing​ The Super Safety Valve is a Fail Safe Safety Valve for testing from a land or jack-up rig. It is normally run inside or below the Blow Out Preventer (BOP) and is used to control well flow. Its ID is 3.0 in., OD is 8.0 in., and its working pressure is 15,000 psi. This valve has a port for chemical injection downhole or to control a subsurface safety valve...

Brand Name:Hebei Pantu

Model Number:2FZ18-70

Place of Origin:China

... for controlling high-pressure oil, gas, and water blowouts. When the pressure of oil and gas is extremely high, the blowout preventer (BOP) can close the wellhead. The BOP contains four valves, which can be activated by injecting mud into the borehole.

Brand Name:SDA

Model Number:3DY-600/40

Place of Origin:China

..., pressure regulating valve,and relief valve! (1).The dynamic end (attached picture by the following)componented by the pulley, crankshaft, connecting bar , etc. dynamic power produced by the belt and driving ...

Brand Name:Ruixin

Model Number:3FZ-35-Y

Place of Origin:China Baoji

... or liquid from the wellbore. It consists of three hydraulic components: the blowout preventer, the wireline, and the wireline pressure control.The main function of the Triple Hydraulic BOP is to seal the wellbore and prevent any leakage of gas or liquid.

Model Number:2"To 6-1/16"

Place of Origin:China

...isolate pressure inside the BOP or tree and tubing. The TWCV, or two-way back pressure valve, is usually installed during field pressure tests on BOP or tree. Both the BPV and TWCV are installed on tubing hangers BPV: Blow out prevent Valve One-way back

Brand Name:xingjin

Model Number:MFZ1-55F/24

Place of Origin:China

... device by penetrating the little slice inside of container valve. Of course, in case of accident that there is something wrong with electrical actuation. So its another actuation is manual control. You can directly pressure the manual manipulator. Then it

Place of Origin:China

Brand Name:Super Safety Valve

Model Number:5"

... Valve body OD: 8.0" Handing subOD: 8.16" The Super Safety valve (SSV) is a master valve used for testing operations from jack-up or land rigs. The SSV is installed in the test string so that a BOP ram can be closed on the ram lock sub located in the top

Place of Origin:China

Brand Name:Gasregen

Model Number:G200/G300

...Valve,Butterfly Valve,Control Unit,Valves,Nitrogen Recovery System Safety valve is a special kind of valve which is mainly used to prevent the pressure system from overpressure. Role: When the medium pressure inside the equipment or pipeline rises above the specified value, the safety valve will prevent the medium pressure inside...

Brand Name:KATA

Place of Origin:SHANGHAI,CHINA

... have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves are simple and often economical. When the plug is conically tapered, the stem/handle is typically attached to