low pim power rf load termination

Brand Name:Vinncom

Model Number:VN-LD-4G-100W-OPm-S-160

Place of Origin:CHINA

...RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system

Brand Name:ELT

Model Number:SSMA-50JR1-1W

Place of Origin:Shaanxi, China

...Termination Low VSWR Power RF Dummy Load Terminations, or loads, offered by Xi‘an Elite Electronic are matched to 50 ohms characteristic impedance. Matched loads provide a termination designed to absorb all the incident power with very little reflection, effectively terminating the line or port in its characteristic impedance. Terminations...

Brand Name:Vinncom

Model Number:VN-LD-4G-50W-OPm-S-160

Place of Origin:CHINA

...Low PIM -163dbc -165dbc RF Load Termination Low PIM Good VSWR Better heating shrink VN-LD-4G-50W-OPm-S-xxx.pdf Part Number VN-LD-4G-50W-OPm-S-160 Operating Frequency ( MHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.30 (≤1.2 @ DC-3.8G) IM3 (dBc @ 2×43dBm) -160 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface 4.3-10 Male Handling Power...

Brand Name:LENOLINK

Model Number:LD10-DIN

Place of Origin:CHINA

... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc.

Categories:RF Termination Load

Country/Region:china

...: Input Power(W) 5 10 30 50 RF Connector DIN-M DIN-F 4.3-10 M 4.3-10 F N-M N-F Frequency Range(MHz) 600-4000 VSWR ≤ 1.25 PIM3 (dBc@2*43dBm) ≤ -153/-155/-160 Input Power(W) 5-50 Impedance(Ω) 50 Color Black Relative humidity 5%~95%

Model Number:ZCT-50RN-18T

Place of Origin:Chengdu,China

Brand Name:Zysen

50W DC-18GHz N connector Coaxial Termination ​ DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, ...

Brand Name:Sinoscite

Model Number:SNSD-204-060400

Place of Origin:Sichuan, China

Aluminum Waveguide Load Waveguide Components 300w From Factory Product type Bandpass filter Model Bpf0.3-0.5gn-2947 Passband frequency 0.3-0.5ghz Insertion loss ≤0.5db Inhibition ≥40db@0.6-1ghz VSWR ≤1.5 Material Aluminum alloy Exterior color Painted black...

Brand Name:ZD

Model Number:zd-att-10n

Place of Origin:China

...expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer. DTS serial coaxial fixed attenuators'

Categories:Leaky Cable

Country/Region:china

...Terminal Loader 50 Ohm 100W High Power RF Termination rf termination 50 ohm sma termination 50 ohm 50 ohm rf load termination Product Features Mainly used for matching networks in radio frequency and microwave system; Wide working band, low VSWR, and excellent anti-impulse and anti-burning performance with high power design; High protection grade. Performance Parameters Type Terminal Load...

Brand Name:Terui

Model Number:N-50JR-4-50

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ...

Brand Name:DALEE

Model Number:DL50011207

Place of Origin:Guangdong,China(Mainland)

Female SMT Type IPX High Power RF Connector rf termination load for WiFi Routers Product Details: Product name: DALEE RF Connector Secification: three generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC ...

Brand Name:SIPU

Place of Origin:China

Model Number:SMA-50JR

...RF Coaxial Termination Load – Straight Type, 1W Power Product Overview This coaxial termination load is a passive microwave component designed to absorb all incident RF energy and minimize signal reflection. It plays a critical role in optimizing system matching and ensuring stable circuit performance. Applications: Ideal for use in: RF...

Brand Name:J&L

Model Number:4.3-10

Place of Origin:DONGGUAN

... Contact Resistance , maximum : 0.3 mOhm Inner Contact Resistance , maximum : 2 mOhm Insulation Resistance , minimum : 5000 mOhm Average Power : 0.6 kW @ 900 MHz Peak Power , maximum : 10 kW Insertion Loss ,

Brand Name:BOCHEN

Model Number:RIG22

Place of Origin:Chengdu

... ceramic core and a flame-retardant coating, it ensures exceptional thermal conductivity, mechanical strength, and long-term electrical stability—even in high-load and high-temperature environments. Features Power Rating:

Place of Origin:Sichuan, China

Brand Name:BONENS

Model Number:RIG42

...Power Load Sheets, RF Resistors, Flange Resistors, Microstrip Resistors, RF Thick Film Resistors, Microwave Resistors, Load Resistors, Attenuation Resistors, Coupler Resistors Product features and uses 1.Small volume, large power capacity, good high-frequency characteristics, reliable performance, and convenient installation. 2.Suitable for power distributor, isolation resistance and terminal load resistor. RIG high-power

Brand Name:Sun Communication

Model Number:RF Low PIM 4.3-10 Male Connector for 1/2" Coaxial Feeder Cable antenna connector

Place of Origin:Guangdong, China

Electrical Specifications Impedance 50 ohm Frequency 0-11GHz ≤1.08 (0-2.2GHz); ≤1.1 (0-3GHz) ≤1.08 (0-2.2GHz); ≤1.1 (0-3GHz) Dielectric Strength ≥2500V RMS, at sea level Dielectric Resistance ≥5000MΩ Insertion Loss ≤0.12dB (@2200MHz) Center contact ...

Brand Name:HG

Place of Origin:Guang dong

TSMMP0103 18GHz SMA Male RF Coaxial Termination 1. Low VSWR: DC to 18.0 GHz 1.25:1 max 2. Power Handing:1W up to 18GHz

Brand Name:YLT

Model Number:chip

Place of Origin:China

.../INSTRUMENTATION RESISTIVE COMPONENTS Features: • DC – 4.0 GHz • 100 Watts • BeO Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested (Chip Terminations) Power Rating Frequency VSWR Dimensions(mm) Model (W) (GHz) (Max) W L H A

Brand Name:Charter Leader

Model Number:CLP-2-8-4Way PD

Place of Origin:China

...Rf Power Divider 2 Way Low Pim IP65 698-2700MHz N Type RF power splitter/dividers are RF site components / passive devices that couple a defined amount of power in a transmission line to a port, the signal allowed to be used in another circuit. 50 Ohm power dividers have many RF...

Brand Name:Greetwin

Model Number:GWPS-740-04-4F-150W

Place of Origin:SHENZHEN

... dB Avg). Excellent VSWR (1.10 : 1 Avg). RoHS Compliant Splitter Construction. Tri Alloy Type N Female (Jack) Low PIM. Product Description 4-Way RF Power Divider, Combiner, Splitter has 50 Ohms impedance. It has Type N female connectors. This