low mould temperature polyol and isocyanate

Brand Name:JOYWAY

Model Number:JYST－31A/B

Place of Origin:China

...low mould temperature for HR foam JYST－31A/B Introduction: JYST-31A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite catalyst. JYHR-11B is made up of TDI and modified MDI. This type of blend polyol can be used under the temperature...

Brand Name:EXCEEDCHEM

Model Number:Polyether Polyol for Boxing Gloves System

Place of Origin:China

... agent, catalyst and so on, Part B is isocyanate MDI. This system enjoys good liquidity, excellent mechanical property,and good cushioning effect. 3. SPECIFICATION Item A/B Ratio(Polyol/Iso) 100/65-100/75 Mould Temperature ℃ 40-45 Demolding Time min 4-6

Place of Origin:China

Brand Name:VICUS-VIDA

...Polyols VS-3 VS-3 is spray blend polyols, blowing agent is 245fa instead of HCFC-141B, it reacts with isocyanate to produce foam which has excellent performances, which are as follows, 1) Fine and uniformity cells 2) Low thermal conductivity 3) Perfect flame resistance 4) Good low temperature...

Brand Name:HIGHTOP

Place of Origin:China

... conductivity 3) perfect flame resistance 4) good low temperature dimentional stability. It applies to all kinds of thermal insulation engineering which uses the spray technology, such as cold rooms, pots, large-scale ...

Brand Name:Xiange

Model Number:RIM-XG-023

Place of Origin:Shenzhen China

... and polyol as they are injected into a closed mould at low pressure. The two components are mixed together as they flow into the mould as a low-viscosity liquid and the reaction, which increases the temperature and the pressure at the surface of the tool,