long shank end mills r5 sx

Brand Name:TS

Model Number:R5*F20*100L*C10*2T

Place of Origin:CHINA

Solid Tungsten Carbide 2 Flute R5 Ball Nose End Mills For Steel The Coated tungsten carbide with thick coating and optimized chemistry can increase wear-resistance. The coating can provide milling excellent milling performance up to 65 HRC.. The end mills...

Brand Name:KTS

Model Number:LQ4

Place of Origin:Sichuan, China

...Carbide Materials 6mm End Mill Cutter , Durable Long Shank End Mills Type: 1. Cylinder milling cutter Used for processing planes on horizontal milling machines. The cutter teeth are distributed on the circumference of the milling cutter, and are divided...

Brand Name:INMIND

Model Number:R5*20*8D*100L*2FX

Place of Origin:China

Long Flute end mill , R5*100 , 10mm AOL 100mm , AlTiN , HRC50 , Ball Nose Cutter, TiAlN Coating Quick Detail: 0.6-0.8um Mirco grain ...

Brand Name:Zhuzhou Shield

Place of Origin:Zhuzhou, China(Mainland)

... end mills with long straight shank for high hardness steel HMX series for machining high hardness steel Wide applicaiton: suitable for Side face, Step shoulder, Straight slot, especially very suitable for side milling and shallow slot milling, Very...

Brand Name:Sanyinghe

Model Number:As your requirements

Place of Origin:Zhuzhou,China

...cutter is mainly used for side milling and face milling. It is used for processing all kinds of die steel, cast iron, copper parts, etc 2.Double edge design,large chip removal Helix angle: 35°: Double edge design with helix Angle makes milling cutter more

Brand Name:Betalent

Model Number:Long neck end mill, Deep groove end mill

Place of Origin:Xiamen,China

...shank length, the cutting flute diameter is very small, below 1mm or 1-3mm, smaller than shank diameter (shank is 4mm or 3.175mm), there is one cone section length connecting the small diameter and shank, we call it neck. The long neck has a long neck as

Brand Name:JT

Model Number:JT

Place of Origin:China

...Long Neck End Mills Straight Shank Milling Cutter Description Carbide Long Neck End Mill Micro grain carbide We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills...

Brand Name:SUPAL

Model Number:OEM

Place of Origin:Jiangsu,Chiang(Mainland)

4*50mm Straight Shank Square End Mill/Solid Carbide End Mill/CNC End Mill Cutter Product name countersink bit TRS >3600 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2-0.6μm Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter...

Categories:Micro End Mills

Country/Region:china

Product Description tungsten carbide square long neck end mills for deep groove milling d1(Flute diameter) L1(Flute length) L2(Effective length) D(Shank diameter) L3(Total length) 0.3 0.6 2 4 50 4 4 50 6 4 50 8 4 50 0.4 0.8 2 4 50 4 4 50 6 4 50 8 4 50 0.5 ...

Place of Origin:Sichuan, China

Brand Name:Kedel

Model Number:KD-FSA80200

...Long Flute Neck Tungsten Carbide Solid Cnc Brazed Extralong Endmill End Mill Mills Cutting To Product Name carbide corner radius end mill Brand KEDEL Model KD-FSA80200 Coating PVD Material 100% Virgin Grade MC115/MC118/MC118X/MC335 Workpiece Steel/Stainless steel/Alloy steel/Cast Iron/Aluminum HRC HRC 45-65 MOQ 1 Piece Shape of Flute Corner radius Flute 2/3/4/5/6 Flute Diameter 0.1-25mm Shank...

Brand Name:OEM

Model Number:customized

Place of Origin:Zhuzhou City, Hunan Province, China

High Performance Tungsten Carbide Solid Carbide Fibre Glass Compression Milling Cutters Execution - Solid carbide ultra-fine grain - Diamond coating - Straight shank in accordance with DIN 6535 HA - 3 spiral changes available Advantage - Spiral change fro...

Brand Name:Seego Carbide

Model Number:Long Shank Tungsten Carbide End Mills

Place of Origin:Hunan of China

Long Shank Tungsten Carbide Square Head End Mills for Hard Metal Milling Discription: An End Mill is a type of milling cutter designed to be held by the shank on one end in order for it to cut with the opposite end. The advantage to an End Mill is that, it is capable of cutting on the periphery, the face or the end of the cutter. our offering of End Mills is extensive-ranging Solid Carbide Roughing & Finishing Mills...

Brand Name:CTCB-AP

Model Number:flattened

Place of Origin:Hunan,China

Solid Carbide Flat End Mill with Straight Shank And Micro Diameter Solid Carbide Flat End Mill is also known as " square end milling cutter or Flattened End Mills". The corners of these mills are sharp and generate a 90° angle. Flat End Mills can be ...

Brand Name:AMG

Place of Origin:CHINA

... grooves in hardened die steels (up to HRC60) and other tough alloys. Manufactured from micro-grain tungsten carbide (YG10X grade), this extra-long reach milling cutter delivers exceptional

Place of Origin:Jiangsu China

Brand Name:Cbaner or OEM

Model Number:Aluminum End Mill

...Aluminum End Mills with long shank 1. Super Raw Material HRC55 Wc:88% Co:12%,TRS>4000N/MM2,Grain Size:0.6um 2. Coating: Uncoated 3. Helix agnle:45 degree 4. Diameter:1-20mm 5.Work piece:Aluminum ,Copper,Aluminum Alloy (Order No) Cutting Flute Shank A.0.L d...

Brand Name:silvercnc

Model Number:PM-2EL

Place of Origin:CHINA

PM series 2-flute flattened end mills with straight shank and long cutting edge Product Feature Optimized geometry, improves chip removal and chip forming with reduced cutting force Higher feed rates and improved metal removal rate for efficient machining...

Place of Origin:China

Brand Name:Jin Tai Pai

Model Number:end mill of 1-20 mm, customized dimension acceptable

Milling cutters/end mills are broadly divided into: 1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing; 2. Ball end milling cutter/end mill: semi-...

Brand Name:RLD Tools

Model Number:HRC65-R5

Place of Origin:China

HRC65 10mm 3/8 0.39370 Inches 2 Flutes Long Carbide Ball Nose End Mill for Die Steel RLD End Mill Catalog in English.pdf Our company only cooperates with big reliable carbide rod suppliers. Only sells the carbide tools produced by ourselves. So don't need...

Place of Origin:MADE IN CHINA

Brand Name:KTC

... style, Inch and Metric Benefits Superior milling surface finish Excellent cutting edge strength and sharpness Reduces chatter and provides favorable milling surface when machining at short or long overhangs Complete offering FAQ Q1: Are you a factory or

Brand Name:KM

Model Number:KM-55

Place of Origin:China

... Long Service Time Workpiece HRC55 Flute 2 Flutes Shank Diameter 4-20mm Package 1pc/plastic Tube OEM & ODM Accpectable Product Parameters Product display Company Introduction ...