k40 end mill blanks

Brand Name:OUQI

Model Number:Unground Carbide Rods

Place of Origin:China

...3800 10.5 Sub-fine grain size, processing by medium speed, good general performance, drill bits and end mills are recommended, suitable for cutting ordinary alloy steel, aluminum alloy, heat resistant alloy, cast iron etc. Specification: Unground ...

Brand Name:Xincheng

Model Number:CF25

Place of Origin:Xiamen

T-Bar High Hardness Wear Resistant End Mill Blanks Tungsten Steel T-Slot End Mill, Cemented Carbide Tungsten Steel T-Slot Milling Cutter, CNC Formed Spiral T-Type Cutter Customization Xincheng (Xiamen) Cemented Carbide Co., Ltd. has 25 years of ...

Brand Name:OED or OEM

Model Number:Carbide Rods

Place of Origin:China

Endmills Blank Cut-To-Length Tungsten Carbide Rods For Cutting Tools​ Carbide solid rod is the most regular carbide rod, OED solid rod with stable quality, competitive prices can provide our customers with very good support. It's good for machining grey ...

Model Number:E550 MAX

Place of Origin:MADE IN CHINA

Brand Name:KTC

...End Mill Bits High Cutting Speed WF25 or K40 Raw Material Fundable Advantage Our Solid Tungsten Carbide End Mills with 4 flutes are used for general milling applications including cutting slots, profiling and routing, and will produce a sharp edge at the bottom of the slots and pockets of the workpiece. These end mills are 4 flute, non-centre cutting end mills...

Brand Name:SUPAL

Model Number:OEM

Place of Origin:Changzhou,Jiangsu,China

...end mill milling cutter 3.175mm 2 Flute Carbide Ball Nose End Mill 1. Raw Material Kennametal Carbide from USA, Carbide from Sweden, CB Carbide from Taiwan, Zhuzhou Carbide from Hunan province. K44& K40 from Germany Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardeness and high toughness. HRC45 HRC55 HRC60 HRC65 YG10X YL10.2 &WF25 Germany K44 &K40

Brand Name:INMIND

Model Number:8*40*8D*100L*4F

Place of Origin:China

carbide end mill cutter square end mill flat end mill with 2/4 flutes Product Description Raw material 4 Flute Long Shank Carbide Taper End Mill/solid carbide extra long square end mill HRC45 HRC55 HRC60 HRC65 YG10X YG10.2&WF25(TaiWan) K44&K40(Germany) ...

Brand Name:Joeben

Model Number:TSC11

Place of Origin:Guangdong, China (Mainland)

...:0.5um Co:12 % Flexural strength: 4300N/mm2 Grain Size:0.5um Co:10 % Flexural strength: 4300N/mm2 T-Slot End Mill Cutter are usually 3-edged or

Brand Name:Sanyinghe

Model Number:Negotiated

Place of Origin:Zhuzhou,China

... Material: Super Micro grain with Diameter less than 0.2UM 7. International Industrial Standard: K10, K05-K15, K20-K30, K20-K40 8.

Brand Name:zhenfang

Model Number:ZF-TC01200

Place of Origin:Zhuzhou,China

... rod with or without coolant hole. We stocked a large range of dimensions for ground and unground carbide rod. Our grade coverage ISO K05 to K40, from Machining Aluminium, steel, non-ferrous metals to titanium Alloy. We also

Brand Name:GREWIN/OEM

Model Number:Aluminum end mill

Place of Origin:Zhuzhou

...; 1-20 mm 4, Organizational Structure: WC mean grain size: 0.4-0.6um 5. Corresponds to International Standards: K20-K30, K20-K40 6, Suitable for:

Brand Name:Betalent

Model Number:Roughing end mill

Place of Origin:Xiamen,China

... material in a short time before semi finish and fine finish milling, usually applied to aluminum and steel. The advantage is very fast, the problem is the surface is coarse after milling, so roughing end mill can be used only as coarse milling, finish the

Brand Name:Zhuzhou Jintai Cemented Carbide

Model Number:D1-D20

Place of Origin:China

..., removing a large number of blanks, small-area horizontal plane or contour finishing; 2. Ball end milling cutter/end mill: semi-finishing and finishing of curved surface; the small blade can finish milling small chamfer of steep surface/straight wall. 3,

Brand Name:KTS

Model Number:Three Flute

Place of Origin:SICHUAN, CHINA

...lot of blanks, fine milling of small horizontal planes or contours. 2. Ball-end milling cutters for semi-finishing and finishing of curved surfaces; small ball-end milling cutters can finish milling steep / straight wall chamfers and irregular contours 3.

Brand Name:JWE

Model Number:JI10/JF10/JF12

Place of Origin:China

... of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer. 1. Grade: ISO K10-K40 2. Diameter: 3 mm-26 mm 3. Length: 330 mm 4. Surface: Unground or H₆ Ground Carbide Rod With One Straight Hole Unit: ...

Brand Name:Ri Xin

Model Number:Various

Place of Origin:china

...K40 Tungsten Carbide Rod for End Mill and Drill Grade: Grade Density g/cm3 T.R.S MPα Hardness HRA Properties & Applications YL50 13.86 2060 1095 It is suitable for manufacturing punching dies and tools. YU06 14.7 3000 2050 It is suitable for manufacturing milling...

Brand Name:JINXING

Model Number:K10/K40 Tungsten Carbide Blade

Place of Origin:CHINA

K10 K40 Tungsten Carbide Blade For Processing End Mill Application Tungsten carbide blade is mainly made of tungsten carbide and cobalt alloy powder through metallurgical mixing, crushing, ball milling, pressing and sintering. The main components are WC...

Brand Name:Seego Carbide

Model Number:Tungsten Carbide Ball Nose Head Endmills

Place of Origin:Hunan of China

Diameter 0.8mm with 2 Flutes Tungsten Carbide Ball Nose Head Endmills Advantages: 1. Carbide endmills surface with TiAIN/ALTiN/TiSiN coated 2. Strength 2500-4000N/mm2 Controlling Mode CNC 3. Usage Metal Chemical Composition 6%-12% Cobalt 4. Density14.45-14...

Brand Name:Santon

Model Number:custom

Place of Origin:SICHUAN

... toughness, high strength, able to withstand larger impact loads, suitable for roughing of stainless steel, and cast iron. K30-K40 YG813 YG546 YD201 Y330 Product Description: Features and applications: 1. The

Brand Name:CTCB-AP

Model Number:flattened,ball nose,corner radius

Place of Origin:Hunan,China

...End mills for general and high performace milling End Tooth Type of Solid Carbide End Mills 2-flute flattened end mills 2-flute ball nose end mills 2-flute R end mills 3-flute falttened end mills 3-flute R end mills 4-flute flattened end mills 4-flute ball nose end mills 4-flute R end mills 6-flute flattened end mills Machining Operation of Solid Carbide End Mills Flatttend End Mills...