jointed test finger probe

Brand Name:KingPo

Place of Origin:China

... standard. The IEC 60529 IP2X Jointed Test Finger Probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a finger. Conforms to: This is the “international”

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

...two active joints that can bend in 90 degrees and made by insulating material, the handle can customized with terminals or M6 threaded hole to work with force gauge. Jointed test finger is to protection of person’s finger from hazard parts (Live parts

Model Number:TP18/19

...test finger probe,jointed test finger probe Model TP18 IEC 61032, Figures 12 Small Child test finger probe,jointed test finger probe ( 0 - 36 months ) Model TP19: IEC 61032, Figures 13 Small Child test finger probe,jointed test finger probee ( 3 - 14 years ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes...

Brand Name:HJ

Model Number:HT-I02T

Place of Origin:China

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe...

Brand Name:kingpo

Model Number:IEC62368-1-Figure V.1

Place of Origin:china

... Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending Part Length: 30/30/40mm The UL Articulated Finger Probe is a standard articulated finger as required by Underwriters...

Brand Name:JLX

Model Number:LX-1202

Place of Origin:Made in China

...Jointed Test Finger is a precision test probe made according to Figure 2 (Fig. 2) of the IEC 61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL and in most of the rules involved in the verification of accessibility to live parts. Technical Parameters: 1. Knurled Finger Diameter:12 mm 2. Knurled Finger...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-U01

...Finger Probe Product information: The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, UL6500 Fig14, UL60065 Fig14 and UL60950 Fig NAF.1. Palm simulator and restricted joint movement simulates human finger...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Brand Name:SHC

Model Number:SC-F1218 F1319

Place of Origin:China

... Probe is the necessary appliance to prevent electic shock for household and similar electrical problem Technical Parameters: 1. Knurled Finger Diameter: 5.6mm 2. Knurled Finger Length: 44mm 3. Head Radius: 2.8mm 4. The First Headle Diameter: 25.9mm 5. The

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Brand Name:GESTER

Model Number:GT-MB06

Place of Origin:China

...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for

Brand Name:YUYANG

Model Number:YY1132

Place of Origin:China

...Test Finger Probe Toys Testing Equipment For Children Safety Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe...

Brand Name:Lonroy

Place of Origin:China

Model Number:LR-G30

... to touch the electronic testing. IEC60065 12mm test finger probe with 75N thrust Nodular Finger Length 80mm Nodular Finger Diameter 12mm Dam-board Diameter 50mm Test Force 15N Standard IEC61032 IEC60065 IEC60335-1 IEC60884-1 Product overview: In line with

Brand Name:YUYANG

Model Number:YYT010C

Place of Origin:China

Test Finger Probe Toys Testing Equipment For Children Toys Testing Equipment Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Test...

Brand Name:szcx

Model Number:CX-T2B

Place of Origin:china

Knurled Finger Diameter:12 mm Knurled Finger Length:80 mm Baffle Plate Diameter:50 mm Baffle Plate Length:100 mm Baffle thickness:20 mm Material:Stainless Steel. Handle:Nylon According to:IEC 61032, IEC 60335-1, IEC 60529-2001, IRAM 4220-1, SASO/IEC 60335...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC ...

Brand Name:Sinuo

Model Number:SN2210-13

Place of Origin:China

...Test Probe 19 Ф5.6mm Children Finger Probe Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 13 test probe 19, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of 36 months or less. Probe Dimension: Hemispherical radius (mm) R2.8±0.05 Finger probe diameter (mm) Ф5.6±0.1 Finger probe length (mm) 44±0.15 Axes of joints

Brand Name:HUST Tony

Model Number:TW-204

Place of Origin:Guangdong,China(Mainland)

...baby or children’s fingers to test if the tested toy component or parts are accessible or. So it is also called standard test finger probe. Technical specifications Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe B for

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Finger Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test