iso 1133 melt index tester

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

...Melt Flow Index Tester MFR MVR Thermoplastics ISO 1133 ASTM D1238 Methods While the ISO 1133 standard requires a five-minute preheat time, ASTM D1238 requires a seven-minute preheat time. The ISO 1133 standard has a starting point of 50 mm and entails 30 mm of piston travel whereas the ASTM D1238 method has a starting point of 46 mm and entails between 6.35 and 25.4 mm of travel. Additionally, ISO...

Brand Name:CHENGFENG

Model Number:CF8110

Place of Origin:China

...melt flow rate meter is an improved version that has added many functions, greatly improving instrument configuration, instrument service life, operational convenience, and testing accuracy. It has unparalleled advantages and cost-effectiveness compared to general melt flow rate meters in China. Meets standards: ISO 1133, ASTM D1238, GB/T3682 Product Usage: Used to determine the MFR value of the melt...

Brand Name:LIYI

Place of Origin:Guangdong, China

... parameters of Melt index instrument also conform to the requirements of the standard IS01133-97,ASTM1238, JIS, which can be used to test polyethylene, polyethylene splendid alkene, polystyrene, ...

Brand Name:Lixian

Model Number:HZ-1706

Place of Origin:China

...ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Melt Index Tester To meet the

Brand Name:JHH

Model Number:XNR-400B

Place of Origin:Beijing, China

Plastometer MFI Measure MFR for Plastic Materials ABS, PS, PMMA, AS, PC Product Description: A melt flow rate meter is an instrument used to determine the melt flow rate of a polymer in a viscous flow state, also known as a melt index meter. It is suitable...

Brand Name:GC

Model Number:GC-MI-EP

Place of Origin:China

...gums pass through a certain temperature and load in a viscous flow state. It is suitble for melting high temperature polycarbonate, polysulfoxide, fluorine plastics, nylon and other engineering plastics. Also, it is appropriate for the polyformaldehyde,

Model Number:LR-A001-D

Place of Origin:China

Brand Name:Lonroy

ISO 1133 Fully Automatic Melt Flow Index Tester MFI Test Equipment Product introduction This tester for high precision automatic melt flow rate instrument, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt...

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

Product description: Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber...

Brand Name:DAXIAN

Model Number:DX 6001

Place of Origin:China

ISO 1133 High Precision Temperature Control Melt Flow Rate Testing Equipment Specifications: Measuring range 0.1-800 .00g/10min (MFR) 0.1-800.00 cm3/10min (MVR) Temperature range room temperature -450 ℃ Temperature accuracy ± 0.2 ℃ Timing accuracy 0.1S ...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

..., nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...melt flow index melt flow rate tester Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt...

Brand Name:GOLD

Model Number:GD-ISO 4589-2

Place of Origin:China

... the oxygen concentration (volume percentage) required by polymers during combustion according to ISO 4589-2 and ASTM D2863. The oxygen index value of a polymer is the minimum oxygen volume percentage in the oxygen-nitrogen mixture required for the

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R804-2

...Melt Flow Index Tester JIS-K72A Brief introduction Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermo plastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt...

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting...

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Melt flow Rate Meter / Plastic Melt Meter / Plastic Particle Melt Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 ℃) for a long ...

Brand Name:vouch

Model Number:5801A

Place of Origin:CHINA

Automatic Limited Oxygen Index Tester , Standard ISO4598-2 Oxygen Testing Machine​ Model:5801A Accord with standard:GB/T 2406.2-2009 GB/T 5454 ISO 4589-2-2006 ASTM D2863 NES 714 Technology data: Technology data: 1.) test range:0~100% 2.) working pressure...

Brand Name:LAB TECH

Model Number:COI

Place of Origin:China

...Index Tester -- Model COI Introduction: COI Oxygen Index tester measures minimum oxygen concentration as necessary when specimen combustion. Oxygen sensor of this equipment is Paramagnetic Type, which is precise, long lifetime, reliable and has less error rate. COI Oxygen Index tester meets the contents of standards like ASTM, ISO 4589-2, NES and so on. Standards: ASTM: ASTM D2863 ISO: ISO...