iec60950 hot wire tester

Brand Name:GESTER

Model Number:GT-MC38

Place of Origin:China

Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing ...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts ...

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

...hot wire tester complies with the international standard IEC 60695-2-12 Luminescent filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr) Standard of Glow Wire Tester: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire

Brand Name:SHC

Model Number:SC-GW01

Place of Origin:China

... indicator is fitted which ,in conjunction with the thermocouple supplied ,accurately measures the glow wire temperature .The electrical circuit of the unit is fully protected by fusesand a miniaturesircuit breaker and incorporates mains on switching and

Brand Name:JINHAIHU

Model Number:ZRS-2

Place of Origin:BEIJING, CHINA

ZRS-2 Hot wire tester Scope of application The heating wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) 1 min, then sets the pressure (0.95±0.1 N)30...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:Guangdong

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts ...

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

IEC60950-1 Hot Wire Ignition Tester, Annealing Time 8s-12s, Power 0.26W/mm±4% M.1 Hot wire ignition test M.1.1 Five samples of each material shall be tested. The samples shall be 1 50 mm long by 1 3 mm wide, and of uniform thickness stated by the material manufacturer. Edges shall be free from burrs, fins, etc. M.1.2 A (250 ± 5) mm length of nichrome wire...

Place of Origin:China

Brand Name:KeRang

Hot Wire Ignition Tester Standard:IEC60950-1 ,IEC60947-1:2011,IEC60695-2-20. Application:It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of ...

Brand Name:Lonroy

Model Number:LRX-3

Place of Origin:China

Thermal Conductivity Analyzer (Hot Wire Method) Hot-Wire Thermal Property Tester 1.Description: The LRX-3 thermal conductivity tester employs the transient hot wire method, including the cross-line method and the parallel-line method. It mainly measures...

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60IEC60695-2-20 Hot Wire Coil Ignition Test Apparatus for Solid Electrical Insulating Materials Overview: Hot wire ignition test apparatus conforms to IEC60695-2-20-1995, ASTMD3874-1997, IEC60950-1999, UL746A-2000, UL746C-2000, IEC829-1998. This ...

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire...

Brand Name:lixian

Model Number:HZ-7046

Place of Origin:China

Electronic Instruments Glow Wire Tester Equipment Hot Into The Depth 7mm + 0.5mm (Adjustable) Precision Class: 0.5 Glow Wire Tester Equipment summary: The glow wire test apparatus using test box part and control part integration design, convenient ...

Place of Origin:China

Brand Name:CHENGFENG

Product Description Glow wire testing machine Technical parameters: 1. Hot wire temperature: 500 ~ 1000℃ adjustable 2. Temperature tolerance: 500 ~ 750℃ ±10℃, > 750 ~ 1000℃ ±15℃ 3. Temperature measuring instrument ...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Wire Tester Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot...

Brand Name:HTI

Model Number:HTE-007A

Place of Origin:Guangdong,China(Mainland)

...wire test apparatus and general test program and GB5169.10, UL 746 a, IEC829 VDE0471 standards such as use of no flame light-off source program simulation test project. Glow wire tester would stipulate Ni80 / Cr20) material and shape of the heating wire in

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire...