iec60947 1 compliant wire damage degree test fixture

Brand Name:KINGPO

Model Number:KP1446

Place of Origin:Mainland China

... which confirms to standards IEC60947-1 clause 8.2.4.3 ,figure 1 table 5. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides,

Place of Origin:China

Brand Name:KeRang

...Test Machine CL-2 Product overview: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC884,IEC60947 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire...

Brand Name:HOOHA

Model Number:ZY6315

Place of Origin:China

... with the requirements of the degree of finish is throughout the round hole, and regulations in the adjusted the spacing of the fixture, roulette, 360 ° continuous circular operation, rotate it 200 times, check sample damage, crack, crack and conductor of

Brand Name:HOOHA

Model Number:ZY6315

Place of Origin:Guangdong

... with the requirements of the degree of finish is throughout the round hole, and regulations in the adjusted the spacing of the fixture, roulette, 360 ° continuous circular operation, rotate it 200 times, check sample damage, crack, crack and conductor of