iec60695 2 20 flammability testing equipment

Brand Name:HongCe

Model Number:GW-2

Place of Origin:China

IEC60695-2-10 Flammability Testing Equipment - Glow Wire Tester PLC Control Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing...

Brand Name:HJ

Model Number:GW-1

Place of Origin:China

...Flammability Testing Equipment For IEC60695-2-10 With 4mm Glow-Wire And Button Operation Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing...

Brand Name:kingpo

Model Number:KP-FT04

Place of Origin:china

...IEC60695-11-3 Flammability Testing Equipment Horizontal-Vertical Flame Chamber Tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4 500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3 Membrane Material Vertical Burning Test...

Brand Name:PEGO Group

Model Number:NF-1H

Place of Origin:China

PLC Type Needle Flame Tester IEC60695-11-5 Flammability Test Equipment 1. Introduction The needle flame test apparatus is controlled by 7-inch color touch screen and PLC, the system comes with a flame calibration system. The shell is made of painted ...

Brand Name:SHC

Model Number:SC-HVT

Place of Origin:China

Horizontal and Vertical Burning Tester flammability test apparatus Main Functions: .The machine can record the burn time and finish experiment automatically, .It can open and close the exhaust system automatically, .Both FT and VW test can be performed by ...

Brand Name:KINGPO

...-vertical flame test apparatus are designed and manufactured according to the standard and related requirement of UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. It simulates the influence of early-stage flame when

Brand Name:Sinuo

Model Number:SN771

Place of Origin:China

...-11-4. Application:It is required by IEC 62368-1:2018 Annex S, IEC 60950:2013 clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-1 clause 30, etc. It simulates the influence of early-stage flame when there is a fire around the

Place of Origin:China

Brand Name:KeRang

...Test Apparatus Standard:UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. Application:It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. It is mainly used in plastic and other non-metallic material sample, solid material. It is also applicable in the Horizontal, vertical flammability

Brand Name:YUYANG

Model Number:YY162

Place of Origin:China

... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

IEC60695 Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test...

Brand Name:HTI

Model Number:HTE-007A

Place of Origin:Guangdong,China(Mainland)

...wire test apparatus and general test program and GB5169.10, UL 746 a, IEC829 VDE0471 standards such as use of no flame light-off source program simulation test project. Glow wire tester would stipulate Ni80 / Cr20) material and shape of the heating wire in

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

...20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview Application: Suitable for fire hazard tests on solid electrical insulating materias of information technology equipment, low-voltage switchgear and control equipment...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test...

Brand Name:SKYLINE

Model Number:SL-7610

Place of Origin:China

...Flammability Testing Equipment Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low voltage electronic appliances, household appliances, electric tools and instruments. It is also applied to plastics and insulation materials, electric connectors etc. Standards According to IEC60695...

Brand Name:VOUCH

Model Number:5112

Place of Origin:CHINA

Horizontal Burning Test Flammability Testing Equipment In Electrical Instruments Standard IEC60695 Glow Wire Tester The device is designed to carry out fire hazard testing on electrotechnical products in accordance with the provisions of International ...

Brand Name:GOLD

Model Number:GD-IEC 60695-2-10

Place of Origin:CHINA

...technical specifications of the "glow wire test method" in IEC60695-2-10, GB/T5169.10, GB/T5169.13 and GB4706.1 standards. It is specially used to evaluate the fire resistance of electrical and electronic equipment, household appliances and their

Brand Name:DAXIAN

Model Number:DX8369

Place of Origin:China

...Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length 20

Brand Name:AI

Model Number:AIC-1230

Place of Origin:CHINA

45 ° Flammability of Wearing Apparel Apparatus Introduction This 45 ° Flammability Apparatus is designed according to the latest edition of the national standard GB/T14645 design and manufacturing.It applies to textile fabric in under 45 ° combustion, ...

Brand Name:YUYANG

Model Number:YYF008

Place of Origin:China

ASTM E 846 Flooring Radiant Heat Flux Test Apparatus Testing Machine 400-600 ℃ Description: This test method is used to measure the critical radiant flux of horizontally-mounted floor covering systems exposed to a flaming ignition source in a graded ...

Brand Name:HOOHA

Model Number:ZY6014D

Place of Origin:China

Y6014D bunched wire and cable flammability tester Scope of application: ZY6014D bunched wire burning machine is strictly according to GB/T18380.31-2008 standard production, such as used to assess the vertical installed into a bunch of wires or cables und...