iec60598 1 bending moment test device

Brand Name:PEGO

Model Number:PG-BMD

Place of Origin:China

... moment test for semi-luminaires. For the semi-luminaires intended for connection to Edison screw or bayonet lampholders the mass and effective bending moment shall not exceed the maximum value. 2. Parameter Control mode Manual control Test station 1

Brand Name:Sinuo

Model Number:SN995

Place of Origin:China

...Bending Moment Test Equipment For Screw Or Lampholders Product Information For Semi-Luminaire Bending Moment Test Equipment: It is conforming to IEC 60598-1clause 4.14.2, Mainly used to detect the bending moment of a semi-luminaire intended to be connected to a screw or bayonet socket due to its own weight.to Test the bending moment of the lamp in the lamp holder. The device...

Brand Name:SKYLINE

Place of Origin:China

...test whether the wire or rope lamp has cracks when it is wound at low temperature. The lamp is wound on the appliance shown in Figure 2, with a winding diameter of 4-5 times its own ...

Brand Name:HongCe

Model Number:HDJ0008

Place of Origin:China

...confirm to the IEC60598-1 clause 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be operated in accordance with following table . A cycle of operation is a movement from one extreme of the range to the other and back to the

Brand Name:Kingpo

Place of Origin:China

...IEC60598-1 clause 4.12.5 Torque Tests On Glands Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres below the internal diameter of the packing. The glands shall then be tightened by means of a suitable spanner, the moment...

Brand Name:SHC

Model Number:SC-AD4143

Place of Origin:China

...Testing Equipment Adjusting Device IEC60598 Information: The test equipment is designed and manufactured according to 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps with adjustable tilt and position , floor lamps and the lamps which are for professional use (such as a plotter lamps) . The test device...

Place of Origin:China

Brand Name:KeRang

Screwed Glands Tester SG-1 Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of ...