iec torque test apparatus

Brand Name:Sinuo

Model Number:SN993

Place of Origin:China

...Torque Test Apparatus For Screwed Luminaires IEC 60598-1 Standards For Lamp Holders Rotational Torque Test Apparatus: IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests” clause 4.12.4 Technical Parameters For Lamp Holders Rotational Torque Test Apparatus: Torque Display Digital display, torque range: 0-10N.m, with maximum torque...

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

...Figure 111 and Table 114. Product overview The Cable Anchorage Pull Force and Torque Test Apparatus (Model SNQC1007B) is a professional testing solution designed in strict accordance with IEC 61851-23:2023 clause 11.6.102. It is specifically developed for

Brand Name:HongCe

Model Number:SOB-1

Place of Origin:China

IEC60065 Figure 11 IEC Test Equipment Socket outlet Torque Test Apparatus Product information: This equipment is according to the requirement standard of IEC60065 Figure 11 and IEC60950.1 clause 4.3.6 to manufacture. A device provided with pins intended...

Brand Name:ZL

Model Number:ZL-3425

Place of Origin:China

...: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as

Brand Name:kingpo

Model Number:KP-CG97

Place of Origin:china

...​: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots...

Brand Name:Pego

Place of Origin:China

Model Number:PG-PCT

...Testing Equipment IEC60320-1 Power Cord Anchorage Torque Test Apparatus with Diameter 100mm Torque Disk 1. Introduction Cord anchorage torque test apparatus designs to meet the test requirements of IEC60320-1 clause 22.2.3. The cord of connectors / plug connectors is subjected for 1min to a torque of 0.1N.m / 0.15N.m / 0.25N.m. The torque test shall be carried out after the completion of pull test. During the tests...

Brand Name:KINGPO

Place of Origin:China

IEC60065 Figure 11 Socket outlet Torque Test Apparatus Product information: This equipment is according to the requirement standard of IEC60065 Figure 11 and IEC60950.1 clause 4.3.6 to manufacture. A device provided with pins intended to be introduced int...

Brand Name:SHC

Model Number:SC-NJ01

Place of Origin:China

...Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus...

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Brand Name:HJ

Model Number:SH-0.2J

Place of Origin:China

... apparatus. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC 62368-1 and etc. When is an impact test appropriate? An impact test is appropriate for equipment likely to be used in areas with non-restricted access and where

Brand Name:Infinity Machine

Model Number:T6330

Place of Origin:Made in China

...Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine Purpose: Laptop hinge torsion test equipment is suitable for laptop, ultrabook, monitor and the other electronic products to do the torque test, and the torsion damping life-span test for the hinge, it can measure the torque...

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Brand Name:YUYANG

Model Number:SCV

Place of Origin:CHINA

... is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Standards: IEC 60332-1-1~3:2004 Features Stainless steel box, the

Brand Name:AI

Model Number:CTA

Place of Origin:CHINA

... that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis IEC 60754. The cable material is processed by prius tube furnace, and then the pH value and conductivity of the gas that

Place of Origin:China

Brand Name:CHENGFENG

...Test Machine High-voltage Track Testing Equipment IEC60587 Standard : Tracking resistance tester Erosion resistance tester Electrical tracking test machine Insulation tracking tester High-voltage tracking test equipment Dielectric tracking tester Contamination tracking test apparatus Electrical erosion test machine Tracking and erosion test apparatus IEC 60587 test...

Model Number:LR-K004

Place of Origin:China

Brand Name:Lonroy

IEC 60335 Tracking Test Apparatus CTI Comparative Tracking Index Tester 1. Reference standard IEC60335, GB4706.1, IEC 6084-1, GB2099.1, GB/t4207-2003, IEC 60112. 2. Technical specifications This product is used for electrical products affected by damp and ...

Place of Origin:China

Brand Name:KeRang

...Testing Machine HC9925 Standard: IEC 60598-1 clause 4.12.5, IEC 60884-1 2013 clause 24.6 Application: This device is use for test the torque resistance strength of screwed gland of lamps and similar appliances. Test sample: Screwed gland of lamps and similar appliances. Feature: Floor type support, lifting weights mechanism drive turntable to achieve torque test...

Brand Name:HOOHA

Model Number:ZY6056

Place of Origin:China

GB/T5169.10~ 13 Needle Flame Test Apparatus , IEC 60695 - 2 - 1 Electrical Testing Machine Scope of application: Needle flame test machine is suitable for lighting, low voltage electrical appliances, household appliances, machine tool electrical appliances...