iec safety blender test finger probe

Brand Name:KingPo

Place of Origin:China

... Product information: The blender probe complies with IEC60335-2-14 CI.20.102. It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. The test is achieved by

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I24

... from above and flat surface can be touched when the blade is rotating. The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test, it shall not be

Brand Name:HJ

Model Number:HT-I02T

Place of Origin:China

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC...

Brand Name:SHC

Model Number:SC-F1218 F1319

Place of Origin:China

... Probe is the necessary appliance to prevent electic shock for household and similar electrical problem Technical Parameters: 1. Knurled Finger Diameter: 5.6mm 2. Knurled Finger Length: 44mm 3. Head Radius: 2.8mm 4. The First Headle Diameter: 25.9mm 5. The

Model Number:TP18/19

... ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child's finger is also called out

Place of Origin:China

Brand Name:Julixing

IEC 60529 Standard Test Finger Probe B with 10 ~ 30N Force Force Level: 10N, 20N, 30N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Knurled Finger Diameter: 12mm Knurled Finger Length: 80mm Application: 1. The joint part of The Standard Test...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:PEGO GROUP

Model Number:PG-TPB

Place of Origin:China

...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Brand Name:YUYANG

Model Number:YY1132

Place of Origin:China

...Test Finger Probe Toys Testing Equipment For Children Safety Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe...

Brand Name:kingpo

Place of Origin:china

...Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfies basic standard for telecom product safety

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 61851-1 Insulated Handle IPXXB Standard Test Finger With Alligator Clip Product overview: This is a precision test finger made in accordance with IEC61032 figure 2 test probe B, it is required by IEC 61851-1 clause 8 and 12.4,etc. Application: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe...

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Finger Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test

Brand Name:MEDKE

Model Number:P1322

Place of Origin:CHINA

Nonin 9000A Adult Adhesive type Disposable Spo2 Sensor P1322 Detailed Product Description Medke P/N: P1322 Nonin 9000A disposable Adult(>30kg) spo2 sensor Latex free 0.9m PVC cable CE/ISO 13485 FSC FDA Packages: non-sterilization, individual package with ...

Brand Name:Biolight

Model Number:m700

Place of Origin:china

Biolight M700 / A8 DB9 neonate wrap spo2 sensor with CE and ISO approved Specification: Safety: IEC 60601-1-1 approved, conformity with MDD 93/42/EEG and EN9919:2005 Patient sizes:adult Ambient temperature: 0 to 40°C(32 to 104°F) Relative humidity: 15% to ...

Brand Name:YUYANG

Model Number:YYT008

Place of Origin:China

... the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Standards: EN 71-1, 16 CFR 1500,

Brand Name:MECHAN

Model Number:PLA201

Place of Origin:China

...Probe / Bipolar Radiofrequency Plasma Wand for Urology Surgery Indications: BPH (Benign Prostate Hyperplasia), Bladder tumor PLA series products inspection items: Biocompatibility: cytotoxicity EN ISO 10993-5:2009 Test of packaging materials EN ISO 11607-1:2009 Safety regulations Third Edition EN 60601-1:2006/AC:2012 Obtained the CE Certificate and RoHS Certificate, Passed the EMC detection IEC 62321:2008 IEC...