iec 62368 1 annex t mechanical strength test

Brand Name:kingpo

Model Number:IEC 62368-1 Annex T

Place of Origin:china

... N ± 10 N over a circular plane surface 30 mm in diameter for a short time duration of approximately 5 s, applied in turn to the top, bottom, and sides. T.5 Steady force test, 250 N The test is conducted by subjecting the external enclosures to a

Brand Name:Sinuo

Model Number:SN1204

Place of Origin:China

...:2014 clause 18.2, IEC61965, etc. Application:For screen size more than 16cm of the cathode ray tubes anti explosion impact and mechanical impact verification, or explosion of the cathode ray tubes protecting verification to the equipment enclosure.

Brand Name:HJ

Model Number:HC9922

Place of Origin:China

...’ clause Annex B 21.101; IEC60068-2-31 ‘Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens’. Application: It is used to check the drop resistance of electrical accessories, to ...

Brand Name:HongCe

Model Number:HDD8302

Place of Origin:China

... 62841-2-5 clause 17.101 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws IEC Test Equipment Feature: The saw is to be set for a 90°cut and oriented in the

Place of Origin:China

Brand Name:KeRang

...Test Device HDD8302 Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.102.3 and Annex BB, EN 60745-2-5 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test...