iec 62196 1 pull force and torque tester

Brand Name:PEGO GROUP

Model Number:PG-PCT2

Place of Origin:China

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to

Brand Name:Sinuo

Model Number:SN1113L

Place of Origin:China

... of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps)

Brand Name:kingpo

Model Number:KP-CG97

Place of Origin:china

...​: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and

Brand Name:Sinuo

Model Number:SN1007

Place of Origin:China

... clause 23.3, etc. Technical Parameters Operation Method Button operation Drive Mode Motor and cylinder Pull Force Weights 50N*1, 60N*1, 110N*1, 40N*2,110N*1 Can achieve 160N, 200N, 240N, 250N,500N Torque Weights 6N*1, 7N*1, 12N*1, 15N*1, 23N*1, 110N*1 Can

Brand Name:HongCe

Model Number:HO6508

Place of Origin:China

... connected cables is special designed and manufactured as per IEC 60947-5-2: 2007 Annex C.8. It is used to test the structural strength performance of various proximity switches and photoelectric sensors with integral connecting ...