iec 61386 21 bending apparatus

Brand Name:Sinuo

Model Number:SN2903

Place of Origin:China

IEC 61386-21 Figure 103 Bending Apparatus For Non-Metallic And Composite Conduit​ Product information: This testing machine is suitable for bending test of metal conduits and other materials, with a bending angle of 90°. Comply with the requirements of Clause 6.6 and Figure 9 of JG3050-1998 "Insulated Electrical Bushings and Accessories for Buildings", "GB 20041.21...

Brand Name:ELECMAN

Model Number:RGD

Place of Origin:China

... from magnetic fields, impact damage and crushing. IEC Rigid conduit has much thicker walls than IEC EMT, and is more expensive as a result. But the thickness of rigid conduit makes it perfect for outdoor installation. Rigid conduit will continue to do

Brand Name:RIFI

Place of Origin:China

Model Number:IEMT

...conduits and fittings Scope: IEC 61386-21 is part of a series of standards that covers electrical conduit systems and their components. This particular standard, IEC 61386-21, focuses on the requirements and specifications for EMT conduit in chile market .

Brand Name:TOPELE

Model Number:IEC 61386 Electrical Pipe

Place of Origin:CHINA

EMT conduit Tube IEC 61386-21 Electrical Metallic Tubing Conduit from China Description: IEC 61386-21 emt conduit EMT conduit pipe is one of the lightest and thinnest unthread conduit pipe .The pipe head has no thread, and it is connected with set ...

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is ...

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

IEC 60598-2-21 Figure 2 Low-temperature Winding Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending...

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ...

Brand Name:SHC

Model Number:SC-ASF28

Place of Origin:China

AS/NZS3112-Figure 2.8 Application of force for pin bending test AS/NZS3112-Figure 2.1 (in part) dimensions of plugs AS/NZS3112-Figure 2.2 Apparatus for flexing test AS/NZS3112-Figure 2.3 Form of pin AS/NZS3112-Figure 2.4 Dimensions of insulaton on ...

Brand Name:SKYLINE

Model Number:SL-7606Z

Place of Origin:China

IEC 60331 Cable Circuit Integrity Fire Resistance Tester Application The tester is designed according to GB/T 19216.11-2003/IEC 60331-11:1999 "Line integrity test of cables and optical cables under flame conditions Part 11: test apparatus - individual fire supply with flame temperature not lower than 750℃". It fully conforms to GB/T 19216.21-2003/IEC 60331-21...

Brand Name:DAXIAN

Model Number:DX1201

Place of Origin:China

...Apparatus for UL1685 Products: Bunched Cable Vertical Flame Spread Testing Machine is designed accordance with the relevant provisions of UL1685,GB18380.3 standard about wire and cable burning test requirements. And meet with IEC 60332-3-10, KS C IEC 60332-3-21...

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

...Apparatus PLC Control 1. Introduction Power cord flexing test apparatus is designed according to IEC60335-1 clause 25.14 and figure 8, IEC60335-2-14 clause 25.14, IEC60884-1 clause 23.4 and figure 21, AS/NZS3112 clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. It is widely used in power cord bending...

Brand Name:CPE

Model Number:1202,2202,3302

Place of Origin:CHINA

IEC Standard 35KV Porcelain Lighting Arrester Insulator Descriptions: We offer a complete line of porcelain bushings and bushing assemblies for transformer, switchgear, capacitor (2 flute to 14 flute) and special power apparatus applications. These durable, reliable bushings are high-quality porcelain designed to offer years of maintenance-free service. Specifications: Cat. No. Type Rated Voltage Bend...

Brand Name:BRITEC

Model Number:BR-POE-P

Place of Origin:China

...apparatus from thunder and instantaneous over-voltage. • Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against lightning induced surges. • Standard: IEC 61643-21 • Enhanced surge protection. • For mounting on 35mm DIN rails