iec 61032 test probe 41

Model Number:TP41

... probe 41 Model TP41: IEC 61032 test probe 41 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel.

Brand Name:Sinuo

Model Number:SN2210-5

Place of Origin:China

IEC 61032 Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test probe 1 figure 5, and required by many standards such as IEC 60529 for IP1 testing, IEC 60335-1, IEC 60065 and etc. This test probe...

Place of Origin:China

Brand Name:Julixing

IEC 61032 Test Probe C & D, IP3X and IP4X, 2.5 mm Test Rod & 1.0 mm Test Wire Basic Introduction: 1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP3X Test Probe C&D ( Test Probe C&D) is the necessary tool to proceed protecting electric shock test...

Brand Name:HJ

Model Number:HT-I02

Place of Origin:China

...60529 Degrees of protection provided by enclosures (IP Code) IP2X IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: This probe is intended to verify the basic protection against access to

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I02

... figure 8.4. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito,finger,base and insulated handle which

Brand Name:PEGO

Model Number:PG-TP31

Place of Origin:China

IEC61032 Test Probe 31 Test Cone Made by Nylon Third - Lab Calibration Certificate Available Introduction: It is designed according to IEC61032 figure 14, this probe is intended to verify the protection against access to hazardous mechanical parts of the ...

Brand Name:kingpo

Model Number:IEC61032-Fig2

Place of Origin:china

material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in ...

Brand Name:KingPo

Place of Origin:China

... confirms to the IEC61032 figure 17 and IEC60335 standard requirements. It is used for testing the protection of thermal radiation heaters which are fixed or portable visibly. Standard:IEC61032 figure 17 and IEC60335. Application:It is used for testing the

Brand Name:SHC

Model Number:SC-41

Place of Origin:China

...±0.2 4 Ф50±0.2 5 80±1 Product information: The test thorn probe is intended to verify the protection against access to glowing heating elements. It complies with IEC61032 figure 16 Test probe 41, IEC60335 standard requirements. Standard Test Probe Kit:

Brand Name:Lonroy

Place of Origin:China

... to meet the requirements of IEC60335-2-14 & GB4706.30 standards. They are used in protection tests to simulate fingers. The CX-125MM standard test finger and test bend finger are mainly used to test the mechanical protection functions of household and

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-A

...test probe with 50mm sphere for checking dangerous part Product Description Rigid test probe with 50mm sphere for checking dangerous part Article NO.: BND-A Made in Shenzhen Test Probe A meets the standard requirements of IEC61032 IEC60529.The Test Probe is a wide range of probes to meet the most common standards including those from IEC...

Brand Name:kerang

Model Number:HT-I27

Place of Origin:CHINA

...:It is used for interlocking apparatus of the covert door of microwave oven. Test sample:Microwave oven. Feature:Please use according to related standard. Parameters: Model HT-I28 Probe diameter Ф3 0 -0.10 Handle diameter Ф10 Probe length 100±0.2

Place of Origin:Guangdong, China

Brand Name:Habotest

Model Number:HT632

... years industry experience in research and development, Habotest standardized its management and quality systems, obtaining ISO9001-2008 and ISO/TS16949, CE, IEC safety standards and

Place of Origin:Shenzhen China

Brand Name:BV pre-shipment inspection

Model Number:Kuwait TER/TIR,Saudi Arabic SASO

Provide BV pre-shipment inspection,Iraq VoC/CoC,Saudi Arabic SASO,Kuwait TER/TIR,ISO/IEC 17025 testing service BV Iraq VoC/CoC certificate sample BV Saudi Arabic SASO certificate sample BV Kuwait TER/TIR certificate sample Contact with us: Edison Xia, QQ:...

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Brand Name:GENY

Model Number:YC-232/USB-IEC-TL

Place of Origin:China

...Probe Iec 62056 21 Optical Probe IEC 62056-21 Standard Optical Probe The Optical Probe is a specialized accessory designed for testing electricity meters that feature an optical interface. This precision instrument facilitates the non-contact reading of data, enhancing the efficiency and accuracy of meter testing...

Brand Name:LIB

Model Number:DI-1500

Place of Origin:China

Sand Dust IP Test Chamber IEC 60529 Test Equipment ♦ Application of Sand Dust IP Test Chamber IEC 60529 Test Equipment Dust IP test equipment are made for the simulation of dust and sand conditions. These dust IP test chambers are used to test the exposure...

Brand Name:MECHAN

Model Number:PLA201

Place of Origin:China

...Probe / Bipolar Radiofrequency Plasma Wand for Urology Surgery Indications: BPH (Benign Prostate Hyperplasia), Bladder tumor PLA series products inspection items: Biocompatibility: cytotoxicity EN ISO 10993-5:2009 Test of packaging materials EN ISO 11607-1:2009 Safety regulations Third Edition EN 60601-1:2006/AC:2012 Obtained the CE Certificate and RoHS Certificate, Passed the EMC detection IEC 62321:2008 IEC...