iec 60950 test generator

Brand Name:JLX

Model Number:LX-950K

Place of Origin:Made in China

...test probe: 1) IEC 60950-1:2005 Figure 2A - Test Finger 2) IEC 60950-1:2005 Figure 2B - Test Pin 3) IEC 60950-1:2005 Figure 2C - Test Probe 4) IEC 60950-1:2005 Figure 2D - Accessibility of Internal Conductive Parts 5) IEC 60950-1:2005 Figure 4A - Impact Test Using a Steel Ball Company introduction HK LEE HING INDUSTRY CO., LIMITED are specialized in manufacturing special, custom built, test...

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

... Test Generator Simulate Electrical Surges Or Transients Test Electronic IEC 60950-1 Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013...

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:AT TP12

... with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 IEC 60950 and 61032, Figure 9 (Test Probe) Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel.

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I99

Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950...

Brand Name:kingpo

Model Number:IEC62368-1-Figure V.3

Place of Origin:china

IEC 60950 Figure 2C / IEC62368-1 Figure V.3 Blunt Probe Testing the Limited Access to Telecommunications Voltages The Blunt probe is required in IEC62368,IEC 60950,IEC 60065, UL and CSA Standards. It is used to check the limited access to Telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfies basic standard for telecom product safety. Meets Requirements for Testing Standard(s) including but not limited to:IEC

Brand Name:YUYANG

Model Number:YYC002

Place of Origin:CHINA

... safety test according to IEC 60950: 1999, UL 94, IEC 707, IEC 695-2-2, ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to

Brand Name:KINGPO

Place of Origin:Mainland China

IEC 60950 Flammability Test Equipment For Arcing Resistance Test IEC60950 Flammability Testing Equipment For Arcing Resistance Test Of Electric And Electronic Products Standard: IEC 60950-1,BS EN 60950-1,BS 7002, UL746A,IEC60947.1, IEC730.1. Application: It is suitable for arcing resistance test...

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

10kV EVSE Testing Equipment Circuit 3 Impulse Test Generator Complied Standards & Clauses This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, ...

Brand Name:SHC

Model Number:SC-VST

Place of Origin:China

...Testing Machine With Electronic Control Parameters: Test object Equipment enclosures Reference standard IEC 60950, IEC 60065, IEC 60598 Test Impact test - drop and swing Drop height 500-1500mm Impact steel ball 500g Release mode electronic control Swing impact available Power supply 220V 50Hz Description: This device is suitable for drop impact test...

Brand Name:YUYANG

Model Number:YYC002

Place of Origin:China

... ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain ...

Brand Name:HJ

Model Number:GW-2

Place of Origin:China

IEC 60950 Fire Hazard Glow-wire Flammability Testing Equipment Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products; IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire based test...

Place of Origin:China

Brand Name:KeRang

...Test Device SH-14 Standard: IEC 60950-1 Clause 4.2.6, IEC 60598-1 Clause 4.13.4b), IEC 60065 Clause 12.1.14, IS 616-2010 Application: This device is suitable for verify the drop resistance performance of audio, video and similar electronic apparatus having a mass of 7kg or less, information technology equipment having a mass of 5 kg or less, and portable lamp . Test...

Brand Name:ASLI

Model Number:AS-DB-200

Place of Origin:China

Ball Drop Impact Test IEC 60950-1 Impact Test Using A Steel Ball Testing Machine Over 20years factory in China Fast delivery 1 year warranty Professional technical support Drop Ball Impact Tester used to measure the impact resistance by the specified steel...

Brand Name:Vertiv

Model Number:M831D

Place of Origin:CN

..., Operating -40 °C to +70 °C (-40 °F to +158 °F) Relative Humidity 0 to 90% Safety and Standards Compliance Electrical IEC 60950-1, EN 60950-1, UL 60950-1 EMC EN 300 386, 2001 Class B; FCC Part 15, Class B Environmental CE; NEBS Level 3 Mechanical Data

Brand Name:HAOMAI

Model Number:RELAYSTAR-6000D

Place of Origin:China

IEC 61850 Test System Model: RELAYSTAR-6000D The RELAYSTAR-6000D is new generation test set dedicated to IEC 61850-based protection devices and Merging Unit. It can simulate various types of messages which conforms to IEC 61850-9-1/9-2/9-2LE, GOOSE, IEC 60044-7/8 FT3. IEC 61850 Test System RELAYSTAR-6000D can either be operated by embedded industrial PC with 9.7-inch touch screen or by test...

Brand Name:PEGO Electronics

Model Number:PG-TPBT

Place of Origin:China

Blunt Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to ...

Place of Origin:Shenzhen China

Brand Name:South Africa LOA/IEC Testing

Model Number:CB/GS/SAA/South Africa LOA/IEC Testing

...Testing/South Africa SANS IEC Safety Test Report a) SANS IEC 60335 - Safety of household appliances, eg. kettles, irons, stoves, refrigerators, commercial catering equipment, etc. b) SANS IEC 60065 - Safety of audio-visual equipment and similar electronic apparatus, eg. TV’s, VCR’s, Hifi’s, radios, etc. c) SANS IEC...

Brand Name:Lonroy

Place of Origin:China

... to meet the requirements of IEC60335-2-14 & GB4706.30 standards. They are used in protection tests to simulate fingers. The CX-125MM standard test finger and test bend finger are mainly used to test the mechanical protection functions of household and

Brand Name:BOTO

Model Number:B-TCT-601

Place of Origin:CHINA

White Color Two Box-Type Hot & Cold Shock Chamber for MIL STD GB JIS JEDEC IEC ISO Tests Product description The product has simple operation performance and reliable equipment performance, advanced and convenient operation of the measuring device, high ...