iec 60884 flexing cable torque tester

Brand Name:HJ

Model Number:HC9918

Place of Origin:China

...Part 1: General requirements’ clause 23.2 Application: This device is used for testing the wear resistance ability of flexing cable with protective sheath of plug, portable socket-outlet, fixed accessories with conductor and connectors, not including the

Brand Name:HongCe

Model Number:HC9918

Place of Origin:China

... torque test to flexing cable of rewirable plugs and rewirable portable socket-outlets where they are connected to the terminals and that their covering is protected from abrasion. Test sample with Tensile Strength ...

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

...figure 21 clause 23.4, which is used to process the flexing test for the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Equipment characteristics: The test times (up to 999999) can be preset on this test ...

Brand Name:KingPo

Place of Origin:China

Model Number:KP-LN9

Cord Anchorage Torque Tester / Power Cord Tension and Torque Tester Description: This device is design and manufactured accord to the requirements of IEC 60335-1 clause 25.15, GB2486 and relevant standards. It is use to perform tension and torque test on ...

Place of Origin:China

Brand Name:KeRang

Socket-outlet Torque Balance SOB-1 Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally ...

Brand Name:PEGO GROUP

Model Number:PG-PCT2

Place of Origin:China

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

Electric Vehicle Charging Station Cable Anchorage Pull Force and Torque Test Apparatus Complied Standards & Clauses It is designed and manufactured according to IEC 61851-1:2017 clause 11.6. Product Overview Samples and restrictions: Electric vehicle ...

Brand Name:SHC

Model Number:SC-CFS

Place of Origin:China

...Cable Flexing Swivel Testing Machine With 6 Workstations Product Introduction: Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which can process 10,000 flexing at a rate of 60 flexing per minute. The test equipment has 6 workstations, thus six cables...

Brand Name:AI

Model Number:AIC22118

Place of Origin:China

Product description: Power cord static flexing tester is applicable to standard IEC60227 and IEC60245-2:1998

Brand Name:I-suntop

Model Number:GFK-90

Place of Origin:China

... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and

Brand Name:BAXIT

Model Number:BXT-WQ-10S

Place of Origin:China

Metal Wire Repeated Bending Testing Machine This testing machine is mainly composed of two parts: the main body and the electrical measurement and control system. It uses mechanical transmission to apply the test torque. A sample of a certain diameter or ...

Brand Name:KingPo

Place of Origin:China

...: glove box for lab research, China, manufacturers, suppliers, factory, custom, wholesale, Power Cord Flexing Test, Table Type Glow Wire Tester, Label Marking Abrasion Machine, IEC 60065:2014 Torque Wrench, Button Switch Endurance Tester, Digimatic Caliper