iec 60811 cold bend test apparatus

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Sinuo

Model Number:SN2308

Place of Origin:China

... of IEC 60811-505, IEC 60811-1-4, VDE 0472 Part 616, and etc. It is applicable for the insulating sheath of the high polymer material, electric wire, rubber, and plastic to do the elongation test at the environment of -35°~0°. Technical Parameters For

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

IEC 60598-2-21 Figure 2 Low-temperature Winding Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending...

Brand Name:PEGO GROUP

Model Number:PG-CBT

Place of Origin:China

Cold Bend Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94. It is applied to the test...

Brand Name:DAXIAN

Model Number:DX8320

Place of Origin:China

...estimate the resistance of elastomeric material and polymeric materials of electric cables to ozone attack . The test apparatus shall consist of Test Chamber, Ozone Generator with High Voltage source & controller, Air Driers/Purifier, Flowmeter Control,

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:SKYLINE

Place of Origin:China

...test whether the wire or rope lamp has cracks when it is wound at low temperature. The lamp is wound on the appliance shown in Figure 2, with a winding diameter of 4-5 times its own ...

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ...

Brand Name:SHC

Model Number:SC-ASF28

Place of Origin:China

AS/NZS3112-Figure 2.8 Application of force for pin bending test AS/NZS3112-Figure 2.1 (in part) dimensions of plugs AS/NZS3112-Figure 2.2 Apparatus for flexing test AS/NZS3112-Figure 2.3 Form of pin AS/NZS3112-Figure 2.4 Dimensions of insulaton on ...

Brand Name:AHONY or Customer's own brand

Model Number:eMarvel 115w

Place of Origin:Guangdong, China

...Cold Chain Car Boat Yacht Advantage The eMarvel light marine solar panel uses top quality material and tested in inner lab,under actual sunshine,test in our factory machine,and in the 3rd party laboratory. Now this light marine solar panel can bend a slightly angle,they are approved by CE,ROHS,S GS,certified under IEC...