iec 60068 2 75 calibration device

Brand Name:HongCe

Model Number:SH-08

Place of Origin:China

... Device for Spring operated impact hammers Its design and manufactured according to the test requirements of IEC 60068-2-63 Annex A, IEC 60068-2-75 Annex B. Feature: Comply with the requirement of standard IEC60068-2-63 and IEC60068-2-75 Specifications:

Brand Name:Sinuo

Model Number:SN2207-5J

Place of Origin:China

IEC 60068-2-75 Spring Impact Hammer Tester 5J Of IK08 For Impact Resistance Testing Product information: The spring hammer tester conforms to IEC 60068-2-63, IEC 60068-2-75 test Ehb, and required by IEC 60335-1 clause 21.1, IEC 60598-1, IEC 60950, IEC 60065, etc. Application: This device...

Brand Name:PEGO Electronics

Model Number:PG-SHCC

Place of Origin:China

Spring Hammer Calibration Device Calibrator as per IEC60068-2-75 Annex B.3 and figure B.5 1. Introduction The spring hammer calibration device calibrator is designed according to IEC60068-2-75 Annex B.3 and figure B.5 for checking the impact energy ...

Place of Origin:China

Brand Name:KeRang

Vertical Hammer Test Apparatus SH-9 Standard: IEC 60068-2-75 Test Ehc: vertical hammer, UL498 clause SD7.2 Application: This device is intended to test the mechanical strength test of the shell of the electric appliance for house hold and similar purpose...

Brand Name:HJ

Model Number:SH-9A

Place of Origin:China

IEC60668-2-75 Impact Testing Machine For Vertical Hammer Test With 0-1000mm Drop Height Button Control Standard: IEC 60668-2-75-2014 Environmental testing – Part 2-75: Tests – Test Eh: Hammer tests clause 7 Test Ehc: Vertical hammer. Application: It is ...

Model Number:IK07

IK07 2J impact test machine,pendulum impact test machine IEC60068-2-75 Environmental testing – Part 2: Tests – Test Eh: Hammer tests, IEC60068-2-63, IEC62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical ...

Brand Name:Lonroy

Place of Origin:China

IEC 60068 Spring Impact Hammer Calibrating Equipment Calibration Device Spring Impact Hammer Calibrator Product Description: 1. Spring Impact Hammer Calibrator IEC60068-2-75 Appendix B requirements of normative documents tolerance manufacturing, most of ...

Brand Name:JLX

Model Number:LX-TF06A

Place of Origin:Made in China

Calibration Device of Spring Hammers Principle of calibration: The principle of this calibration procedure is to compare the energy provided by a spring hammer, which is difficult to measure directly, to the energy of a pendulum, calculated from its mass...