iec 60065 telecom test probe

Brand Name:Sinuo

Model Number:SN2210-23

Place of Origin:China

IEC 60065 Figure 2C Telecom Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc. It is used to check whether the bare parts of TNV circuits of information technology equipment have sufficient protection. There is a M6 thread on the end of the handle, through where the test probe...

Brand Name:kingpo

Place of Origin:china

Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfies basic standard for telecom...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:HongCe

Model Number:HT-I23

Place of Origin:China

... ACCESS AREAS there is adequate protection against contact with bare parts of TNV - 1 , TNV - 2 and TNV - 3 CIRCUITS except that access is permitted to: Test Finger Probe – contacts of connectors which cannot be touched by the test probe (figure 3); –

Place of Origin:China

Brand Name:Julixing

... Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle ...

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:KingPo

Place of Origin:China

Product Details Telecom Test Probe Complies With IEC60950 Figure 2C Product information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of information technology equipment...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:HJ

Model Number:HX9801

Place of Origin:China

... Strength Test Instrument . Application: It is used to test the dielectric strength of the insulating materials. Test sample: Insulating materials. IEC Test Equipment Parameter: Metal pin mass 100g (50g optional) Metal pin diameter 5 mm ± 0.1 (Ф6.8

Brand Name:PEGO Electronics

Model Number:PG-TPBT

Place of Origin:China

Blunt Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to ...

Place of Origin:Shenzhen China

Brand Name:CB/GS/SAA

Model Number:CB/GS/SAA

..., commercial catering equipment, etc. b) SANS IEC 60065 - Safety of audio-visual equipment and similar electronic apparatus, eg. TV’s, VCR’s, Hifi’s, radios, etc. c) SANS IEC 61029 - Safety of transportable motor-operated electrical tools, eg.

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

...:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:SHC

Model Number:SC-41

Place of Origin:China

Access Probe 41 To Test Hazardous Parts Figure 16 Thorn Probe Main specification and corresponding technical parameters: Parameters /Mode Test thorn probe SC-F1641 1 Ф30±0.05 2 21.5 0 -0.05 3 80±0.2 4 Ф50±0.2 5 80±1 Product information: The test thorn ...

Brand Name:kerang

Model Number:HT-I27

Place of Origin:CHINA

...:It is used for interlocking apparatus of the covert door of microwave oven. Test sample:Microwave oven. Feature:Please use according to related standard. Parameters: Model HT-I28 Probe diameter Ф3 0 -0.10 Handle diameter Ф10 Probe length 100±0.2

Brand Name:BOGES

Model Number:BGS-MS156-137-SMA-L

Place of Origin:Dongguan, Guangdong, China

Test Application RF cable Assembly With SMA Male And Test Probe To Hirose MS156 Connector Detail Product Description Frequency: DC~3GHz S.W.R: 1.3 Max. Impedance:　50 ohm Cable: RF 1.37 Cable Connector: MS156 Connector, SMA Male Application: 1. Wireless industries 2. Communication equipment 3. Base stations 4. Telecom 5. Test...

Place of Origin:Guangdong, China

Brand Name:Habotest

Model Number:HT632

... years industry experience in research and development, Habotest standardized its management and quality systems, obtaining ISO9001-2008 and ISO/TS16949, CE, IEC safety standards and

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Brand Name:GENY

Model Number:YC-232/USB-IEC-TL

Place of Origin:China

...Probe Iec 62056 21 Optical Probe IEC 62056-21 Standard Optical Probe The Optical Probe is a specialized accessory designed for testing electricity meters that feature an optical interface. This precision instrument facilitates the non-contact reading of data, enhancing the efficiency and accuracy of meter testing...

Brand Name:Haida

Model Number:9003-HD

Place of Origin:China

... Standards: IEC 60065 Channel Options: 0° or 90° phase shift Reference Frequency: 1000 Hz Application: TV test equipment, audio signal testing Product Overview This Pink Noise Generator is designed to meet the pink noise specifications outlined in