hss roughing ball nose end mill

Place of Origin:China

Brand Name:KM

Model Number:kmhardwaretool

Product Description 1. 2~6 F End Mill 2. Sutiable for Copper,Mould steel,Stainless steel ,carbon steel, alloy steel, cast steel, tooling steel, mould steel, aluminum alloy steel, non ferrous alloycarbon steel, alloy steel, cast steel, tooling steel, mould ...

Brand Name:RLD Tools

Model Number:HRC50-65

Place of Origin:China

...End Mill Coarse Pitch 4 Flutes Roughing Ballnose Endmills For Hardened Steel Product name RLD custom end mill 4F Roughing Ball Nose End Mill Feature For hard steel Suitable for Steel, stainless steel, iron, cast iron/as per requirement Machine type Rough milling Flutes 4/ customized Coating Customized Helix Customized Carbide Raw Material Introduction End mill...

Brand Name:SUPAL

Place of Origin:Changzhou,Jiangsu,China

Used in Milling Machine, CNC, Drill press, Engraving machine. Metal, woodworking, alloy steel, stainless steel, etc. High rigidity, widely used in the shallow slot, profile milling, and finish machining. 1. Product Name: Solid Carbide Endmill CNC Cutter ...

Model Number:E550 MAX

Place of Origin:MADE IN CHINA

Brand Name:KTC

...Ball Nose End Mill / 1 Inch Carbide End Mill 0.6 μm Grain Material end mills are made either out of cobalt steel alloys (known as high speed steel, or HSS), or from tungsten carbide in a cobalt lattice (colloquially shortened to "carbide"). The latter option is considerably harder, more rigid, and more resistant. Carbide tools can be run at speeds 2 to 2.5 times faster than HSS...

Brand Name:BWIN

Model Number:R1.5*6*d4*75L-2F HRC55

Place of Origin:China

...large chip removal space: This ball nose milling cutter mainly focuses on profiling, semi-finishing and finishing, and it is recommended to cut materials within HRC55 degrees; 2. Long service life: It can directly carry out high-speed rough machining to

Brand Name:JT

Model Number:JTR2

Place of Origin:China

...Ball Nose End Mill for Roughing To Finishing Heat Resistant Description: Ball nose end mill 1. Promise quality with good price 2. Coated improve the cutters life 3. Short lead time We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills...

Brand Name:Zhuzhou Shield

Place of Origin:Zhuzhou, China(Mainland)

...ball nose slot, high speed machining applicable Very suitable for Carbon steel, Alloy steel, Cast iron, Nodular cast iron, Pre-hardened steel, hardened steel, 40HRC, 50HRC,55HRC, also suitable for work Stainless steel, Titanium alloy, Heat resistant alloy. Excellent wear resistance, high breakage resistance PM ball nose end mills can achieve distinct grooves with low roughness...

Brand Name:Sanyinghe

Model Number:Customize

Place of Origin:Zhuzhou, China

... end mill and aluminum alloy end mill. 2. Size: Diameter 0.2mm-20mm standard and non-standard 2-4 flutes, deep groove, round head, end angle R, oblique flute (tapered),long flute end mill. 3. Good material Grade: HRC45/55/60/65/68. 4. Workmanship: Made

Brand Name:INMIND

Model Number:R6*24*12D*75L*2F

Place of Origin:China

...golden etcn Coating TiAIN etc. Sample order Availiable Feature High quality,ODM&OEM 2.Application of Ball Nose end mill Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, ...

Brand Name:Betalent

Model Number:2 flute, Ball nose end, Long end mill

Place of Origin:Xiamen,China

65degree solid carbide ball end mill, Long carbide ball nose end mills, 2 flute carbide end mill,drill mill end mill 2 flutes ball nosed end mills, Made from high quality virgin material solid carbide rod, 9% , 10% or 12% cobalt content, grain size 0.2...

Brand Name:TS

Model Number:R0.75*F3*50L*C4*2T

Place of Origin:CHINA

... design can insure it to meet defferent process condition, rough process or finish process is ok for this end mills with the coating. Product Name: Solid Tungsten 2 Flute R0.5 Ball Nose End Mills For Steel Material: Tungsten Carbide Coated: Nano Standard:

Brand Name:Joeben

Model Number:BEM18

Place of Origin:ShenZhen

Carbide Ball End Mill 2 Flutes Tungsten Carbide taper neck ball nose End Mill Cutter/carbide End mills overview 1. Fully enables running at rough machining parameters, resulting in finish surface quality. 2. Excellent performance in machining titanium, ...

Brand Name:BABOS

Model Number:HRC65 R2*4*8*4*75

Place of Origin:China

4 Flutes HRC 65 R2*4*8*4*75 TiAISiN Coated Carbide Ball Nose End Mill Product Description: The R2×4×8×4×75 Ball Nose End Mill is a high-precision cutting tool designed for advanced machining tasks requiring tight tolerances and superior surface ...

Brand Name:GREWIN/OEM

Model Number:Ball nose end mill

Place of Origin:Zhuzhou

... 0.2-0.9 mm; 1-20 mm Diameter of rods 4-20 mm Length 50-100 mm Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc Flutes No. 2/4 Suitable for machine:

Brand Name:CTCB-AP

Model Number:Solid Carbide Ball Nose End Mills

Place of Origin:Hunan,China

... perfomance geometries. They can be used or milling a large corner radius, grooving with a full radius, and contour or profile milling. End Tooth Type of Solid Carbide End Mills 2-flute ball nose end mills 4-flute ball nose end mills Machining Operation of

Categories:Ball Nose End Mill

Country/Region:china

Product Description wxsoon 65HRC 2 tapered flutes solid carbide ball nose end mill with relieved necks Cutting Diameter 2mm Flute Length 6mm Shank Diameter 6mm Total Length 80mm Helix Degree 30 Numbers of Flutes 2 Brand Wxsoon Origin China Customized ...

Brand Name:YD

Place of Origin:China

...End Milling CNC Milling Cutter Product Description: Ball Nose Milling Cutters φ12x70x125mm 2 Flute Blue Solid Carbide End Nose Mill The Ball Nose Milling Cutter φ12x70x125mm 2 Flute Blue Solid Carbide End Nose Mill is a high-performance tool designed for

Place of Origin:Jiangsu China

Brand Name:Cbaner or OEM

Model Number:ball nose end mills

HRC45 tungsten carbide 2Flutes ball nose end mills Carbide Raw Material HRC45 ,Grain Size:0.7um , TRS>3800n/mm2 Diameter:R0.5-R10.0mm Length:...