high temperature melt flow index tester

Brand Name:JHH

Model Number:XNR-400D

Place of Origin:Beijing, China

... high polymer under high temperature according to test methods of GB/T3682, ISO1133, ASTM D 1238-2010. It is used to determine the melt flow rate of high polymer such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc. It is widely supplied to

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Melting Point Tester,Melt Flow Index Tester,Melt Flow Index MFI Testing Machine Specifications Melt Flow testing machine 1.Melt Flow Indexer is used to determine melt-mass flow rate . 2.High quality,melt indexer 3.Direct factory 1.Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt indexer Electronic MFR Plastic Melt Flow Index...

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting temperature...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R804

...Melt Flow Index Tester , AC220V 50Hz Rubber Testing Machine Brief introduction 1.Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate ratio FRR and other functions, this machine high precision temperature

Brand Name:Lonroy

Model Number:LR-A001-C

Place of Origin:China

...Melt Flow Index Tester for Themoplastics Mfr Mvr Methods is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value. Lr-A001-C ASTM Electronic Loading Melt Flow Index Tester...

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Melt Indexer Price,Melt Flow Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 degrees) for a long time. 3.Dual sensor configuration, precise temperature control, better temperature...

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it

Brand Name:GC

Model Number:GC-MI-DP

Place of Origin:China

... every 10 minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also,

Brand Name:Kejian Kinsgeo

Model Number:KJ-3092B

Place of Origin:Dongguan China

AC220V±10% 50HZ MFR Melt Flow Index Machine , Electronic Melt Flow Index Tester with One Year Warranty Introduction: Melt Index Tester meets the standards GB/ T3682-2000, the main parameters of Melt Index Tester also meet the standard requirements of ...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

... material from the barrel of a plastometer under preset conditions of temperature and load. For melt mass-flow rate, timed segments of the extrudate are weighed and the extrudate rate is calculated in g/10 min and recorded. For melt volume-flow rate, the

Brand Name:AISRY

Model Number:ASR-5605

Place of Origin:China

High Quality Application Determination Of Melt Flow Rat Testing Machine Application: It can be used for the determination of melt flow rate and melt density of various plastics such as polyethylene,polypropylene,polystyrene,ABS resin,fiber resin,acrylicester polycarbonate and so on. parameter: Model ASR-5605 Temperature range 80℃~400℃ Temperature fluctuation ±0.2℃ Temperature uniformity ±0.5℃ Temperature...

Brand Name:DAXIAN

Model Number:DX 6001

Place of Origin:China

... -450 ℃ Temperature accuracy ± 0.2 ℃ Timing accuracy 0.1S Displacement accuracy 0.01mm Load full load Material cutting modes manual, time ...

Brand Name:GOLD

Model Number:GD-ISO4589-3

Place of Origin:China

...High Temperature Oxygen Index Testing Equipment Introduction: The high temperature oxygen index tester is based on the ordinary intelligent oxygen index tester. An electric heating device is added to the combustion tube to preheat the mixed gas, and the ignition temperature...

Brand Name:BonninTech

Model Number:XNR-400B/D

Place of Origin:Wuhan, China

...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, ...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

..., nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

Product description: Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber...

Brand Name:KS

Model Number:TPUJ

Place of Origin:China

...a good melting point of 50-60°C and a melt flow index of 20-30. This powder has good adhesive properties and can be used in a wide variety of applications. It is also resistant to washing at temperatures up to 40°C. The PES hot melt adhesive powder is a