heat resistance test method

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

... index (GWFI) test method for materials” IEC60695-2-13 “Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials” IEC60695-2-10 “Fire hazard testing - Part 2-10:

Brand Name:SKYLINE

Model Number:SL-FL56

Place of Origin:China

... of protective materials, which meets the test standards of ISO 6942 and EN 366. The instrument consists of two testing methods. Method A is used to visually evaluate the appearance changes of the material after thermal radiation. Method B measures the

Brand Name:Sinuo

Model Number:SN2103

Place of Origin:China

...Heating Resistance Test Device Equipment overview: The coupler heating test device is designed and manufactured according to IEC60320-1 clause 18.2 and figure 13. It is used to check the heat resistance of coupler in hot conditions and severe hot conditions.This device is built-in temperature control, precise digital display and durable. Technical Characteristics: Test station Single Control method Electrical Heating method

Brand Name:LONROY

Place of Origin:Guangdong, China

... in accordance with the national standard GB15763 "Laminated Glass". This device is mainly used to test the heat resistance of laminated glass. It is applicable to both architectural and automotive laminated glass. Place the sample in the

Brand Name:AI

Model Number:TPP3

Place of Origin:CHINA

...Heat Resistant Test Equipment Catalogs for EN 373&348&6942&367&702.pdf Introduction It is suitable to determine heat radiation resistance or thermal conductivity of protective gloves and protective clothing. Feature 1. Radiation source is made up of 6 groups heating bar,length of heat bar is 356mm±2mm,and the length of heating part is 178±2mm,diameter of heating...

Place of Origin:China

Brand Name:HongCe

Model Number:PI-1

... heating resistance and burning resistance of bolt and plug with insulation sleeve. It can imitate the insulated parts of which the plug-and-socket device’s safety performance may be damaged by electric heat stress. It should not be over damaged for

Brand Name:ASLI

Model Number:TH-150-A

Place of Origin:China

... types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, automobile, ...

Brand Name:kingpo

Model Number:KP-8110P

Place of Origin:china

...Figure 40 Abnormal Heat of Insulating Sleeves of Plug Pins Test Apparatus 1. Product information: To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884 1 figure 40,This test apparatus consists of an ...

Brand Name:DAXIAN

Model Number:DX8320

Place of Origin:China

...Heating Ozone Aging Environmental Test Chamber for Thermoplastic Rubber Product description: Conforms with GB/T7762-2003 , GB/T3642 Dynamic Tensile Test Method, GB/T2951.5 Special Test Method for Elastomeric Mixture Section 1: Ozone-resistance Test , GB/T2951.21 Elastomer mixture special test methods - ozone resistance test, ASTM D1149 rubber ozone aging standards, ASTM-D1171 rubber deterioration standard test methods...

Model Number:FGW

...resistance test,glow wire tester,glow wire ignition tester Glow Wire Tester is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite a material by the effect of a glowing heat source, under the specified conditions of test. Specification: Heating

Place of Origin:China

Brand Name:CHENGFENG

... roof wind resistance test, physical properties of metal roof. [Applicable standards] GB/T 31543 "Wind resistance test method for single-layer roll roofing systems", JGJ 255 "Technical specifications for skylight roofs and metal roofs",

Brand Name:ZL

Model Number:ZL-7016

Place of Origin:CHINA

..., leather, wrapping paper, etc. The following methods to test (the average of three times, the value at least one of decimal point) its water resistance. Test Method: A. pressure method: rose up the waters level at speed of 1cm/sec, Record the value of

Brand Name:GOLD

Model Number:GD-ISO12127

Place of Origin:China

...heat transmission test machine ISO 12127 Description: The contact heat resistance test device is developed in accordance with the EN 702 test standard and simultaneously meets the requirements of the domestic AQ 6103-2007 standard for the contact heat resistance test of welder protective gloves. The test...

Brand Name:Infinity Machine

Model Number:RS-8233

Place of Origin:Made in China

... point in testing machine, forcing the heating rod and rising temperature with 2℃/min. when the center of the testing sample sinking to a specific position (plastic material 0.26mm, hard rubber material 0.25～ 0.33mm), the temperature will be the

Brand Name:LCS

Model Number:Optional

Place of Origin:CN

...resistance test/voltage ammeter method, ratio meter method and bridge method Ground resistance is an important parameter used to measure whether the grounding condition is good. It is the resistance encountered when the current flows from the grounding device to the earth and then flows through the earth to another grounding body or spreads to a distance. It includes the grounding wire and the grounding body itself. Resistance...

Brand Name:HAIDA

Model Number:HD-W955

Place of Origin:Guangdong, China (Mainland)

...Resistance Tester For Pilling Test Introduction This tester is specially designed equipment to determine the snagging resistance of a fabric. Usage To rapidly determine the snagging resistance of robust apparel and furnishings fabrics. Testing standards ASTM D3939 Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method) JIS L 1058 Test methods...

Brand Name:JINHAIHU

Model Number:XRW-300F

Place of Origin:BEIJING, CHINA

...Heating Defortion Temperation of Plastics is designed to fit the rapid development of plastic industry and improve the level of material research and test. They adopt the newest international and national standards: ISO 75-1-1993 Plastics; determination of

Brand Name:Tesa

Model Number:4657

Place of Origin:China

Tesa 4657 Heat Resistant Acrylic Coated Duct Tape Occlusive Occlusion Fixed Grid Test Gray Product highlights 1.Heat shielding in the production of vehicles and machinery 2.Window edge shielding 3.You can even repeat the oven drying 4.Permanent internal...

Brand Name:SHC

Model Number:SC-Fig27

Place of Origin:China

Fig37 20N Heat Resistance Test Ball Pressure Test Apparatus IEC60884 Product details: The Ball Pressure Tester conforms to many standard requirements like IEC60884-1, IEC60950 and so on. It is used for testing the heat resistance of the electrical ...