hd17 5 0mm tungsten alloy bar

Brand Name:JX

Model Number:Tungsten Copper Alloy Bar High Electrical Conductivity

Place of Origin:China

...: Sintering surface, Forged surface, Ground surface Applications forTungsten Copper Alloy Bar Because of the high electrical conductivity and low consumption, Copper tungsten bars are widely used to make Grid siderod, Lead, Support, and Electrode for the

Place of Origin:China

Brand Name:Satellite

Model Number:W232,W262,W273,W263,W252,W221,W242

Introduction of Tungsten Alloy plate 1. Width*Length: (2.0-250.0mm)*(2.0-250.0mm) 2. Thickness: 2mm-15mm 3. Density: 15.8-18.50 g/cm3 4. Composition: W content: 85-97%, W-Ni-Fe, W-Ni-Cu 5. Surface: Sintering surface, Ground surface The main performance of ...

Brand Name:WEIYE

Model Number:Standard

Place of Origin:Zhuzhou, Hunan，China（mainland）

...Blank Strips Usage of Tungsten Carbide Strips: YG6X: it can be used to make steel wire, non-ferrous metal wire or bar material with less than 6.0mm diameter. YG6: it can be used for steel wire, non-ferrous metal and alloy bars under 20mm diameter, and can ...

Brand Name:PANGANGGROUP,TISCO,ANSTEEL,BAOSTEEL

Model Number:AISI 01, UNS T31501, JIS SKS3, 100 MnCrW 4, W-Nr 1.2510, ISO 95MnWCr5

Place of Origin:China

AISI 01 UNS T31501 Mould Steel 100 MnCrW 4 W-Nr 1.2510 JIS SKS3 Stainless Steel Round Bar Describe This type of steel is one of the cold-worked oil-hardening tool steels. It is relatively inexpensive and contains small amounts of manganese, tungsten and ...

Brand Name:OUQI

Model Number:Straight Coolant Rods

Place of Origin:China

Tempered cast iron endmills blank tungsten carbide rods with straight hole ISO K10-K30 Cobalt: 7.5% Outer diameter 6.3mm +0.25 Inner diameter: 1.0mm ±0.15 Length: 210mm +5 mm Surface roughness: Raw sintered Ra 6.3 or as required Application: for machining ...