hard anodized aluminum pneumatic rotary actuator

Categories:Pneumatic Air Actuator

Country/Region:china

Indicator A position indicator with Namur mounting is standing on all VESON pneumatic actuator for mounting accessories. Pinion The hardened alloy steel pinion is precision ground and Nickel plated (over 15um) in order to reduce friction, provide maximum ...

Brand Name:OEM

Model Number:DA,SR

Place of Origin:Jiangsu, China

... Pressure 2~8bar Surface Treatment hard anodizing Working Temperature Normal Temperature: -20ºC(-4°F) ~ 80ºC (+176°F); High Temperature: -15ºC(+5°F) ~ 150ºC (+302°F); Low Temperature: -40ºC(-...

Brand Name:OEM

Model Number:AT52-AT270

Place of Origin:China

... Working Pressure 2~8bar Surface Treatment hard anodizing Working Temperature Normal Temperature: -20ºC(-4°F) ~ 80ºC (+176°F); High Temperature: -15ºC(+5°F) ~ 150ºC (+302°F); Low Temperature: -40ºC(-...

Model Number:AT105

Place of Origin:China

...Aluminum pneumatic rotary actuators WARNING 1. Do not operate the actuator using inflammable,oxidizing, corrosive, explosive or unstable gases or liquids (use only not dangerous fluids - group 2 according to 97/26/EC directive). Moreover, for actuators installed in potentially explosive zones, make sure that the internal parts of the actuator...

Brand Name:CENO

Model Number:QCN0202-36S

Place of Origin:China

...Pneumatic Rotary Joint 2 Channel Gold Contacts Signal integrated pneumatic rotary joint with 2 channels G1/4'',pressure -100KPa~ 0.5MPa,gold contacts,used for food industryused for injection equipment,plastic fiber manufacturing and chemical pharmacy. QCN series rotary unions are compact,light weight and corrosion resistant featuring a stainless steel shaft and hardcoat anodized aluminum...

Brand Name:IVY

Model Number:SG300

Place of Origin:Jiangsu Nanjing

...Aluminum Double Internal Rotary Pneumatic Bus Door System For Yutong Bus 1. Introduction: Application: City buses System Component: Base-plate assembly, Shaft assembly and Door panel assembly. 1) The base-plate assembly (the most important component) is the actuator of the power door system, which consists of pneumatic cylinder, solenoid valve, shaft stud, and controls. 2) The door panel is made of aluminum

Brand Name:Okaf

Model Number:OK-CZ310SJ

Place of Origin:China

... treatment, improves the surface hardness, anti-corrosion strength, and longer lifetime. 5. On the top , you can mount the camera ,antenna, lighting, mobile equipment etc. 6. The mast can be vertically mounted outside of the ...

Brand Name:JARCH

Model Number:JSR-HY025-11E-3G

Place of Origin:Shenzhen , China

...Passage 8mm Pneumatic Electric Rotary Union For Welding Robots Feature: 1. 3 Circuits 90A , 7 Circuits Signal 2. 3 passages,tube size:8mm 3. ID/OD:25/155mm, bore size:25mm 4. Precision ball bearings for long life 5. Rugged anodized aluminum construction ...

Brand Name:TF

Model Number:TF20092809

Place of Origin:Guangdong, China

Precis Cnc Milling Aluminum Pneumatic Parts With Machining Part Product Description: Support Custom CNC Machining Parts Of Most Materials Quotation According to your drawing(size, material, processing content, etc) Tolerance丨Surface Roughness +/-0.005 - 0....

Place of Origin:China

Brand Name:OEM

Overview Quick Details Place of Origin: Jiangsu, China Grade: Alloy 6061, 6063. T5,T6 6063,6061,2024,7075,etc Shape: Round, square, rectangular or customizable Surface Treatment: Polish,anodizing,powder coating,etc Length: customizable Usage: Aircraft, ...

Brand Name:Toxmann

Model Number:Toxmann-86

Place of Origin:China

AL7075 External Grinding Parts Precision Turned Parts NC Lathe Machining Parts Company Profile-Toxmann.pdf Processing & Inspection Machine List.pdf This is a pneumatic handle produced with aluminum alloy AL7075, also known as pneumatic control valve, for ...

Brand Name:Toxmann

Model Number:According to drawings

Place of Origin:China

CNC lathe mechanical parts-Precision CNC lathe components-Pneumatic hand This aluminum alloy part is made for foreign customers.The main body is processed by CNC lathe, the rest of the hole and groove is processed by CNC.Surface finish requirements RA0...

Brand Name:AFK

Model Number:AB

Place of Origin:China

N POS PART NAME MATERIAL N PCS 1 BODY CF8M 1 2 END CONNECTION CF8M 2 3 BALL AISI316-CF8M 1 4 BALL SEAT P.T.F.E 2 5 SEAT P.T.F.E 2 6 STEM SEAT P.T.F.E 1 7 O-RING FKM (Viton®) 1 8 STEM SEAL P.T.F.E 1 9 PACKING GL AND AISI 303 (1/4"-2“) 1 STEEL (2"1/2-4“) 10 ...

Brand Name:Custom

Model Number:LKM00

Place of Origin:China

Shenzhen Luckym Technology Co.,Ltd. CNC Machining parts ,CNC milling parts, CNC turning parts,Grinding parts,Wire cutting parts, Laser cutting ,Sheet metal parts, Casting ,Stamping , Molding Assembly parts,tooling fixtures, Precision rotary stable etc. ...

Brand Name:DCL

Model Number:DCL-05H/10H/20H/40H/60H/100H/160H/250H

Place of Origin:WUHAN,CHINA

...rotary compact actuator with potentiometer / hard anodized aluminum hosing Features Quarter turn operation Modulating type available with electric positioning system Insulating class F induction Motor with overheating protection Rugged IP67 hard die cast aluminum alloy enclosure/100% test during production Two auxiliary limit switches to confirm valve position PTC electronic heating component to prevent condensation in actuator...

Place of Origin:Zhejiang China

...Pneumatic Actuator Features 1. Dual Pistion Rack 2. Integrated Design 3. High Output Power 4. Integrated Design 5. Long Service Life 6. Stainless steel fasteners for long term corrosion resistance 7. The interface between piston, pinion and body is made of low friction material Specifications 1). Actuator Body: Aluminium alloy(Hard Anodization...

Brand Name:OEM

Model Number:OEM

Place of Origin:China

...Pneumatic Actuated Ball Valve Double Acting With Solenoid Valve Specifications Features Of Pneumatic Operated Ball Valves :- Indicator:It is a mounting accessory with a Namur mounting which is standard for all pneumatic operators. Pinion: Pinion offers maximal wear resistance to the valve. It is made of accustomed alloy steel and is plated with 15um nickel to reduce friction. ActuatorBody: It is made of anodized aluminum

Brand Name:PRIUS,XINYI or OEM

Model Number:SC kits

Place of Origin:Ningbo,China

...Pneumatic Cylinders Kits black cover with bore from 32mm to 320mm Specification NO. Designation Material NO. Designation Material 1 Nut Carbon Steel 11 Barrel(Without) Hard anodized aluminum 2 Tie-rod Nut Carbon Steel 12 Tie-rod(Without) 3 Front Cover Seal NBR 13 Piston Rod(Without) S45C Hard chrome carbon steel 4 Front Cover Aluminum...

Brand Name:NYHAU

Place of Origin:KunShan,China

...Pneumatic Actuator Our sanitary butterfly valve clamp style is powered by a rack and pinion double acting actuator. The body and disc of the valve are made in stainless steel 304 or 316 and the body is precision CNC machined. The body and the disc are polished to meet the 3A standard. The standard gasket is a food grade EPDM. The pneumatic actuator with hard anodized

Place of Origin:Ningbo China(Mainland)

Brand Name:FLUIDAC or OEM

Model Number:AKS-50-50-S-Y

...Pneumatic Clamping Cylinder With Air Buffer For Automotive Welding SMC type Welding clamping double acting Single action Pneumatic air cylinder Bore size 40mm-80mm AKS-50-50-S-Y with magnet and Air buffer adjustable Quick Detail: * SMC interchange welding clamping cylinder * Hard anodized aluminum...