gis bushing

Brand Name:Chuangyin

Model Number:Epoxy Insulation Accessories Series

Place of Origin:ShenZhen

35KV/200A Indoor Epoxy Resin Cast Bushing GIS Bushing Insulation Features Made of epoxy resin Produced by APG technology 100% factory tested In compliance with IEEE standard 386 Technical Data: Item Parameters Voltage Class 15 kV Rated Current 200 A AC ...

Brand Name:RIFI

Model Number:EW110

Place of Origin:China

... With Brass Bush by RIFI are designed for use in BS Standard Conduit Raceway Connection for electrical conduit systems. Made from high quality galvanized steel, these fittings ...

Brand Name:TOPELE

Model Number:BSC-20

Place of Origin:Zhejiang, China

... BUSHING, BS STANDARD BUSHING, CONDUIT BUSHING Size: 20mm, 25mm , 32mm, 40mm, 50mm Applications: 20mm- 50mm zinc BS4568 GI conduit bushing electrical wiring installationr Gi conduit bushing are used for the electrical wiring installation, it connect the

Brand Name:RANLIC

Model Number:RL-B823

Place of Origin:Hangzhou,China

... 2.2mm 3) Can be engraved the customer's brand 4) Female screws tapered and remove the bur 5) Both end &head is tapered to remove the bur 6) As the femal bush for bs4568 and bs31 conduit 7) Can supply the zinc die casting brass plated female bush 8

Brand Name:ranlic

Model Number:RL-B823

Place of Origin:hangzhou,china

... For Gi Conduit & GI Socket Thread BS4568 General: 1) All use the real brass material,the brass component exceeding 56% 2) Female Bush wall thickness is exceeding 2.2mm 3) Can be engraved the customer's brand 4) Female screws tapered and remove the bur 5)

Brand Name:Xi'an Shendian

Model Number:SDCT35-xxx

Place of Origin:China

35kV Type C bushing ​Product introduction: This kind of outer cone bushing fits for C-GIS switchgear, SF6 RMU, Air-insulated switchgear and transformers which up to 35kV. It is avaliable to be specfied and engineered according to customer demand. ...

Brand Name:JH

Place of Origin:China

...GI Pipe Fittings For Plumbing Features: 1) Blow-out proof stem 2) Investment Casting Body 3) Pressure Blance Hole in Ball Slot 4) Full Bore 5) Threaded type: NPT,PT,BSP,BSPP,BSPT,DIN,Rc,Rp is available 6) Locking device is available. Name malleable iron gi pipe fittings Type elbow, tee, reducer, cap, sockets , back nuts , unions, nipples, bushings...

Brand Name:GDZX

Model Number:ZXFJ-3

Place of Origin:CHINA

... the early failure SF6 circuit breakers, transformers , bushings other electrical equipment inside. It is widely used in electric power, railway, metallurgy and petrochemical industries. Features 1. Simultaneously measure and respectively ...

Brand Name:JR-RESIN

Model Number:8333A&B

Place of Origin:Hubei,China

JT-RESIN SERIES No-post Epoxy resin and hardener with liquid epoxy resin be used for dry transformer Product Description Bi-component alicyclic saturated structure epoxy resin system /liquid can be used to the processes of APG& Conventional casting process...

Brand Name:CPE

Model Number:ANSI metal fitting

Place of Origin:CHINA

... strong the life span is long, maintenanle is simple ,no explosion dangerous, no contaminate and the noise is low . Usage: corona control for GIS (Gas Insulated Switchgear), Substation, Arrestor, HV bushing, Shunt Reactor, Power Transformer, Power cable

Brand Name:XIWUER

Model Number:XWE-DTCW 40.5 kV

Place of Origin:XIAN, CHINA

capacitive bushing insulator for transformer Features Accuracy up to 0.5 High linearity Large dynamic range Ferrofree Magnetic Resonance Application Secondary gas insulated switchgear (GIS) Ring Main Units (RMU) COMPANY OVERVIEW Xian Xiwuer Electronic & ...

Brand Name:RISING

Model Number:RSJF-9002

Place of Origin:China

... discharge detector is applied to partial discharge live circuit detection of transformer, reactor, generator, transformer, bushing, GIS, power cable, power capacitor, CVT, arrester, high voltage switch, switch cabinet and other ac/dc high voltage ...