gb4610 2008 plastic testing machine

Place of Origin:China

Brand Name:CHENGFENG

Model Number:CF8602

...Plastic Spot Temperature Tester, fully conforms to GB4610-2008 Product Description Concepts related to the test results: Flash-ignition temperature (FIT): The lowest temperature at which enough flammable gas is ignited when a flame is applied under specified test conditions. Self-ignition temperature (SIT): The lowest temperature at which it ignites by heating without any ignition source under specified test...

Brand Name:LIYI

Model Number:LYXJJD5

Place of Origin:CHINA

...Plastic Testing Equipment , Izod Imapct Plastic Testing Machine Introduction: This tester is mainly used in hard plastic (including plank, materials, plastic profile), the increase of nylon, glass fiber reinforced plastic, ceramic, and cast stone, electrical insulating materials etc. Nonmetal material impact toughness is determined. Standard: ISO179-2000 GB/T1043-2008 JB/T8762-1998 GB/T 18743-2002 ISO180-2000 GB/T1843-2008...

Brand Name:Infinity Machine

Model Number:RS-8215A / RS-8215B

Place of Origin:Made in China

...various tough materials which endure the impact at specified angle and load. Test standards: IZOD: ASTM D256, ISO 180, GB/T 1843. JIS K7110 CHARPY: ASTM D6110, ISO 179, GB/T1043 Features: After test, test results show automatically and they can be saved or

Brand Name:KEJIAN

Model Number:KJ-3090

Place of Origin:Dongguan China

...Test Machine Charpy Impact Plastic Testing Machine Plastic Testing Instruments Uses: Digital izod impact testing equipment is used to test the impact toughness of the non-metallic materials such as plastic, reinforced nylon, fiberglass, ceramics, cast stone, plastic...

Brand Name:HOOHA

Model Number:ZY6014B

Place of Origin:China

...2008 Electronic Testing Machine Single Cable Vertical Combustion Testing Scope of application: This machine is suitable for the flammability test of various wire and cable insulation covering material PE, PVC and SRPVC. During the test, according to GB/t18380.11-2008 test...

Model Number:LR-A017

Place of Origin:China

Brand Name:Lonroy

... for testing of plastic values for raw rubber, plastic rubber mixing, rubber compound and rubber. preheating and a certain size of sample placed between two parallel plates under specified temperature and constant ...

Brand Name:HOOHA

Model Number:ZY6070

Place of Origin:Guangdong

...standard: Consistent with GB/T 2407-2008: determination of combustion characteristics of plastic hard plastic samples with hot rod contact and ISO/T 2407:1981 test standard. Main parameters: The test chamber volume: 1 m з. Material: for baking paint (or

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R604

...Plastic Testing Machine ,Rubber Tube Plastic Testing Machine Introduction Usage: Film Degree Dupont Plastic Testing Machine ,Rubber Tube Plastic Testing Machine, JIS-K5600 Dupont Impact Tester is used for testing the firm degree of the plastic, ceramic, acrylic, glass fiber materials and coating material. Principle: The machine...

Brand Name:Haida

Model Number:HD-B604

Place of Origin:China

... control plastic material tensile strength Tester is used to test tension, compression, shearing force, adhesion, peeling force, tear strength,etc.of specimen, semi-product and finished product in the field of rubber, plastic, metal, nylon, fabric, paper,

Brand Name:ZL

Model Number:ZL-3021A

Place of Origin:CHINA

...Plastic Testing Machine Summary: Pipe pressure burst test machine is used for long-term pressure and plastic pipe and composite pipe burst test test equipment, the product complies with ISO1167, GB / T6111 "Fluid Plastic Thermoplastic Pipe endurance test...

Brand Name:PTE

Model Number:WAW-600E WAW-1000E

Place of Origin:China

...testing machine manufacturers+plastic testing machine manufacturer Ⅰ Name and type of equipment Electromechanical universal testing machines,Compression universal testing machine/tensile Ⅱ Application of equipment This machine is applied in analysis and research of statics property testing...

Brand Name:SKYLINE

Place of Origin:China

...Testing Equipment Rubber Plasticity Testing Machine Application It is used to determine the plasticity of William's plasticity, rubber and rubber, and the recovery value (parallel plate method) of raw rubber, plain rubber and mixed rubber. The main structure of this machine is different from the general plastic machine...

Brand Name:BOTO

Model Number:B-CY-120

Place of Origin:China

Ozone Aging Test Chamber Environmental Test Chambers Lab Machine GB/T7762-2008 Test Machine Description: Ozone is present in very small amounts in the atmosphere, but is a major factor in rubber cracking. Ozone aging chamber is to simulate and enhance the ...

Brand Name:lixian

Model Number:HZ-1003A

Place of Origin:China

..., transmitter, microprocessor, mechanism of load drive, computer and color inkjet printer. This Series machine can be applied to test lots of materials in rubber tensile elongation, compression, tear, big size peel (can 90 degrees and 180 degrees) and

Brand Name:DAXIAN

Model Number:DX8301

Place of Origin:China

Wire and Cable Slicing Machine , Rubber Wire Plastic Testing Machine For GB/T2951 "General Test Method for Wires, Cables, and Jackets," the standard regulated power distribution cables and communication cables. Technical Parameters: Table width: ...

Brand Name:wangtebei

Model Number:WTD

Place of Origin:China

...multi-sensor support, image interface, flexible data process and powerful system function. universal test machine can do tensile test, tear test, peel test, bond test with different clamps for metal,wire,steel,cable,plastic and other kind of materials. 2.

Place of Origin:China

Brand Name:GC

Model Number:GC-QK-Z

Product Description A sample notch cutting machine is a device used to create notches or grooves in various materials such as metal, wood, or plastic. It is commonly used in industries like manufacturing, construction, and woodworking. Features . Cutting ...

Brand Name:Gaoxin

Model Number:GX-4027

Place of Origin:China

...ceramic, fiberglass or fastness test of paint 5．Test method: The machine will test the product on the test bench, the steel ball drop with set weight free fall from set height on the product, to impact product, then check that the product ...

Place of Origin:China

Brand Name:HongCe

Model Number:LTI-1

...figure 27 and figure 42. The first one is fit for impact test of wire while the latter one is applied for the impact test of plug, socket, switch, wire and electrical conduit. Technical parameters: This device is used with the cryostat. It should be put in