gb2099 wire heating deformation testing machine

Brand Name:DAXIAN

Model Number:DX8389

Place of Origin:China

...Wire heating deformation testing machine Equipment use: This machine is used to test the degree of thermal deformation of materials such as plastics and wire sheaths. Test method: At a specific temperature, place the specimen freely in the testing machine for 30 minutes, then clamp it between the parallel plates of the machine...

Brand Name:SKYLINE

Place of Origin:China

UL1581 Wire Heating Deformation Testing Machine Uses Used to test the degree of thermal deformation of materials such as plastic and wire skin Technical Parameters Test device: 3 groups Temperature: normal temperature ~300 °C Weight: 50, 100, 200, 500, ...

Brand Name:ZL

Model Number:ZL-1005

Place of Origin:China

...Heating Deformation Testing Machine For Plastics , Synthetic Resin Products etc. Equipment summary: Imposed load in high-temperature environments and measurement of changes in the amount of compression, the main test materials properties is suffered pressure at high temperatures. This equipment is used to study the material such as plastic, wire...

Brand Name:HAIDA

Model Number:HD-B604-S

Place of Origin:Guangdong, China (Mainland)

... grips: tensile, peel, tear, heat seal, adhesive, bend and open force. Deformation under defined load: Test deformation under defined load of tested sample Load under defined deformation: Test load under defined deformation of tested sample Software can

Brand Name:JINHAIHU

Model Number:XRW-300C

Place of Origin:BEIJING, CHINA

HDT & Vicat Softening Temperature (VST) Tester for Plastic Heat Deformation Test Description: Softening Temperature Test Equipment measuring instrument used in polymer materials (typically a molecular weight greater than 10,000, including rubber, plastics,...

Brand Name:WTB

Model Number:WDW-5

Place of Origin:China

...Wire Universal Tensile Testing Machine , Material Testing Equipment 1.introduction WDW-5KN electronic single column metal wire universal tensile testing machine mainly used to test mechanical properties for metals,nonmetals and composite materials.It can test max.bearing tensile force, compression force,bending force,tensile strength, compress strength,bending strength,deformation...

Brand Name:AI

Model Number:AIRZH-20

Place of Origin:CHINA

...thermal bonding and solvent bonding performance of enameled round wires with a nominal diameter of 0.050mm and 2.000mm and below 4. The heat bonding testing machine determines the ability of the coil winding to bond together under the action of heat and

Brand Name:HERRMAN

Model Number:/

Place of Origin:CHINA

Wire Cable Testing Machine CABLE CYCLIC HEATING TESTING SYSTEM 1. USAGE Cable cyclic heating test system is a new development test system from Jiang Su Xi Bo. It is special for type test of power cable. It can simulate condition that the power cable is ...

Brand Name:Gaoxin

Model Number:GX-4008

Place of Origin:China

..., copper bare wire) and the plastic deformation resistance in simple torsion test of wires, also for the surface and internal defect detecting test and twist resistance test of varnished wire film. 4. Test standard: IEC60884-1:2006,GB2099.1-2008,GB2099.3

Place of Origin:China

Brand Name:HongCe

Model Number:LTI-1

...figure 27 and figure 42. The first one is fit for impact test of wire while the latter one is applied for the impact test of plug, socket, switch, wire and electrical conduit. Technical parameters: This device is used with the cryostat. It should be put in

Brand Name:Kingpo

Place of Origin:China

Model Number:GX-4004

... Feature Electric drive Weight 100kg Volume 600×1500×700cm Test standard JIS, CNS Equipment Description: Heating deformation testing machine imposed load in high-temperature environments and measurement of changes in the amount of compression, the

Brand Name:Infinity Machine

Model Number:RS-8233

Place of Origin:Made in China

... point in testing machine, forcing the heating rod and rising temperature with 2℃/min. when the center of the testing sample sinking to a specific position (plastic material 0.26mm, hard rubber material 0.25～ 0.33mm), the temperature will be the

Place of Origin:CHINA

...Deformation Wire Wrapping Testing Machine Testing Machine Product Description NDW Series wrap testing machine, is designed and produced as ISO7802:2013 : Metallic Material- Wire-Wrapping Test. Used in the method for determining the ability of wire of diameter or thickness 1.0 to 10 mm inclusive to undergo plastic deformation during wrapping. The test consists of winding a wire...

Brand Name:JIEDONG

Model Number:JD-3024D

Place of Origin:Guangdong, China

..., IEC6158. This instrument is suitable for cutting the plug wire with the rear power cable at 100mm, or the power charger is put into the drum as the test piece, and the weight is set according to the weight of the test piece. The number of times, the

Brand Name:YUYANG

Model Number:YY095

Place of Origin:China

...Testing Machine Electronic Measuring Instrument Applications 1. Tested sample: laminated materials, wood, leather, rubber & plastic, metal material, etc. 2. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. 3. Deformation under defined load: Test deformation under defined load of tested sample 4. Load under defined deformation: Test load under defined deformation of tested

Brand Name:Haida

Model Number:HD-B615A-S

Place of Origin:Guangdong, China (Mainland)

...Testing Machine Applications 1. Tested sample: laminated materials, wood, leather, rubber & plastic, metal material, etc. 2. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. 3. Deformation under defined load: Test deformation under defined load of tested sample 4. Load under defined deformation: Test load under defined deformation

Brand Name:Kinte

Model Number:WH-8847

Place of Origin:Guangdong,China (Mainland)

...Testing Machine Thermal Compression Tester 200X180X200mm​ 1) This device complies with the requirements of the relevant provisions of Standards GB2099.1-96 and IEC884-1 (Article 25.4). 2) for the assessment of electrical accessories in the case of heat under pressure, the device does not provide test...

Model Number:LR-K002

Place of Origin:China

Brand Name:Lonroy

...60695 Glow Wire Test Machine for Electronic Products 1. Test Standard IEC60695-2-10/11/12/13 <Test Methods for Fire hazard of Electrical and Electronic Products IEC60884-1-2002 "Plug and Socket for Household and Similar Purposes" GB2099.1-2008 ...

Brand Name:lixian

Model Number:HZ-4012

Place of Origin:China

.... It is mainly used for theФ3.0～Ф10.0 metal wire torsion testing machine. The function of which is determination of metal wire to withstand severe plastic deformation in one-way or two-way reversed ability and display of wire surface and inner defect.

Brand Name:ASLi

Model Number:AS - PC - Volume

Place of Origin:China

... operated machine that is used for testing tensile strength and elongation of materials like plywood, wires, cables, conductors, ferrous and non-ferrous materials. Features: 1. Force value and deformation can display at the same time. 2. Drive by