flushing fluids mud pump relief valve

Place of Origin:China

Brand Name:YINDA

Model Number:Triplex Mud Pump

...; but Reset Relief Valve can automatically snap to a full open position when the preset pressure is exceed. Once the pressure released, the reset was done to recover to work within several minutes when to operate the ...

Brand Name:LONGWELL

Model Number:Oil Drilling Mud Pump

Place of Origin:China

What is Mud Pump Valve K10 Style for UNB-600 mud pump? Mud Pump Valve K10 Style for UNB-600 mud pump NB100.05.11.00 NB800M.05.17.00 GH3161-05.11.00 is the key component of the hydraulic end of the mud pump. The valve assembly consists of valve body, valve ...

Brand Name:HUIFENG

Place of Origin:CHINA

Flange/welding type Mud Gate Valve Product Introduction The seats are designed for a complete, tight shut off after every closing cycle. Once closed, line pressure forces the gate up against the downstream port sealing it against the rubber seat.ber seat. ...

Brand Name:Lake

Model Number:All models

Place of Origin:China

... of mud pump fluid end expendables and spares parts. Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump. These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods,

Brand Name:IDECO

Model Number:T1300/T1600

Place of Origin:China

Gaomi Eastland Oilwell Machinery Co.,Ltd Module: “I” shaped module, “L” shaped module, suction module, discharge module Spare parts: Upper and lower Valve Guide, Liner Gasket, Piston Rod, Rod Clamp, Valve Cover, Valve Cover Seal, Cylinder head, Cylinder ...

Brand Name:Pangolin

Place of Origin:Hebei China

... double-acting reciprocating piston pump. The pump head is equipped with four 40mm steel ball valves to increase the pressure. It is mainly used to provide flushing fluid for geophysical blast holes. It can also be used to supply flushing fluid to the

Place of Origin:Jiangsu,China

Brand Name:xitan

Model Number:BW-160

...Flushing Fluid Drilling Mud Pump , Triplex Mud Pump Depth 1000m Quick Detail: 1.BW-160 mud pump is a kind of grouting pump with light weight. 2.A horizontal three-cylinder reciprocating double acting piston pump. 3.The main role of this grouting pump is to supply fluid, make it circulate during drilling and to carry rock waste back to the ground. Description: BW-160 mud pump is used to provide flushing fluid...

Brand Name:JINZHOU SHITAN

Model Number:BW-160

Place of Origin:China

... piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa)) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling.Mud pumps can be

Brand Name:SINOVO

Model Number:BW500

Place of Origin:China

Mud Pumps For Drilling Rig With Stable Operation, Low Moise, Simple Structure And Convenient Disassembly And Maintenance Basic information: Mud pump is a kind of machine that transports mud or water and other flushing fluid to the borehole during drilling. Mud pump is an important part of drilling equipment. In the conventional positive circulation drilling, the surface flushing medium, water, mud or polymer flushing fluid...

Brand Name:BOMCO

Model Number:JA-3

Place of Origin:China

... and shutting neatly. 2. Piston's bearing pressure area is small. 3. To reposition simply. 4. Safety Valve may use for multifold mud pumps. 5. flange / screw thread connection 6. Max pressure:35Mpa We cover wide range for fluid end and power end assembly.

Brand Name:JINZHOU SHITAN

Model Number:BW250

Place of Origin:China

...pumps are an important part of drilling equipment. In the commonly used positive circulation drilling, it is to send the surface flushing medium--clean water, mud or polymer flushing liquid to the bottom end of the drill bit through a high-pressure hose, a

Brand Name:National Oilwell NOV Mission, SOUTHWEST, BOMCO

Model Number:14P220 MUD PUMP

Place of Origin:CHINA

...MUD PUMP , 8P80 MUD PUMP, 9P100 MUD PUMP, 10P130 MUD PUMP, 12P160 MUD PUMP, 14P220 MUD PUMP. NATIONAL 14-P-220 (7500 PSI) W/ FAST CHANGE VALVE COVERS FLUID END MODULE & ACCESSORIES ITEM # OEM PART # DESCRIPTION QTY PER PUMP 80718020 ASSY, COMPLETE FLUID END W/ VALVE SERVICE & SUCTION MANIFOLD 1 1 1295601 MODULE, STUDDED FLUID...

Brand Name:ROSCHEN

Model Number:NB-260-7

Place of Origin:Germany

.... To determine the right and left hand side of the pump, stand at the power end and face the fluid end of the pump. Specify pump model, size, and serial number (see name plate on the pump). Serial number is also stamped on the cylinder end of the frame.

Model Number:F2200,F1600,F1300,F1000,F800,F500

Place of Origin:China

...Mud Pump/Slurry Pumps China Manufacturer Price F800 F1300 F1600 Triplex Well Drilling Mud Pump/Slurry Pumps Product Description of Mud Pump: Mud pump is one of the most important equipment in the drilling operation which discharge high viscosity,heavy density and low sand contented fluid to well bottom in order to cool drill bit,flush well,crush the rock and take out debris. Mud pump

Brand Name:RanCheng

Model Number:BW1200/7

Place of Origin:China

...Mud Pump For Water Well Drilling Product Description This bidirectional double-cylinder horizontal piston pump is designed for long service life and has a maximum flow rate of 10 It is mainly used for conveying flushing fluids in shallow drilling in geological, geothermal, water and oil and gas formations. Flushing fluids...

Brand Name:XW

Model Number:350/500/800/1000/1300/1600

Place of Origin:China

... mud pump strictly according to America Petroleum Institution API 7K Standard. All of its expendable parts are interchangeable with any other spare parts produced according to API standard. Therefore it is ...

Brand Name:NOV

Model Number:FB-1600

Place of Origin:China

... by changing the position of the safety pin, which is easy to operate and reliable. The parts in the safety pin safety valve are: safety pin, piston, piston rod and cushion. Shear pin safety valve has two connection methods, one is threaded connection, and

Brand Name:SHUANG SHENG HAI

Place of Origin:CHINA

...MUD PUMP FLUID END COMPONENTS All modules and fluid end components offered by SSH are of high-strength, premium alloy steel, heat treated for a long working life and machined to precise tolerances. Each product is rated for all drilling operations up to 7500 PSI. SSH module accessories offer full lines of cylinder heads, valve lock covers, cylinder head threaded rings, cylinder head plugs, valve cover plugs, upper valve...

Brand Name:TR Solids Control

Model Number:Valve Box

Place of Origin:Xi'an,China

... designed to house and support the suction and discharge valves that regulate fluid flow. Engineered with precision machining and high-strength alloy steel, the valve box ensures reliable pressure resistance, extended service life, and smooth operation in

Brand Name:MEGA DRILLTECH

Model Number:MDT-160

Place of Origin:China

Mud Pump, Drilling Rigs Triplex Mud Pump, 160 Pump,Horizontal Reciprocating Piston Pump MDT-160 mud pump is a horizontal, three-cylinder single-acting, reciprocal piston pump. It is mainly used to supply flushing fluid to the drilling well in engeering drill's bedrock drilling well in engineering drill's bedrock driling or exploratory drilling. Its shell is A-alloy, so it is lightweight. The pump...