flexible cable bending tester

Brand Name:Sinuo

Model Number:SN2302B

Place of Origin:China

...Cable Bending Tester Product Infromation The SN2302B Integrated Two Pulleys and Three Pulley Flexing Test Machine is a precision testing system designed to evaluate the bending mechanical performance of flexible finished cables. It supports both two-pulley and three-pulley flexing tests, providing a versatile platform for verifying cable...

Brand Name:Kingpo

Model Number:GX-4020-A

Place of Origin:China

... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test, the

Place of Origin:China

Brand Name:CHENGFENG

... insulated and extra flexible wires with a rated voltage of 450/750V or below, and with two or more cores. Its performance and structure should meet the national standards of GB/T 5013.2-2008, GB/T ...

Brand Name:MIYU

Model Number:MY-XC-360-R

Place of Origin:China

Wire/Cable Bending Tester (MY-XC-360-R), Sheet metal material with white color Description This testing machine is customized according to the "General Safety Requirements for ...

Brand Name:HongCe

Model Number:HDX1302

Place of Origin:China

...Flexible Cables Flexing Tester For Cable Testing Equipment Product Introduction with Cable Testing Equipment: Comply with standards:IEC60245-1, IEC60245-2. Purpose:used for mechanical strength testing of finished flexible cables. This test is not applicable to cables with more than two concentric layers whose conductor nominal cross-section exceeds 18 cores. Sample scope: finished flexible cable...

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:I-SUNTOP

Place of Origin:china

... Bending Fatigue Test Machine apply for bending endurance test for cable connected with plug.Fix the sample on jig and put the weight at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to

Brand Name:HeJin

Model Number:HDX1302

Place of Origin:China

...Flexible Cables Flexing Tester For Completed Flexible Cables Standard: IEC60245-1’Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements’. IEC60245-2 ‘Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods’clause 3.1. Application: It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables

Place of Origin:China

Brand Name:KeRang

Flexible Cables Flexing Tester HDX1302 Our company has a core team with years of technology development, technology transfer, technical consulting, technical services experience, providing Appliance Test Equipment, Medical Device Testing Equipment, ...

Brand Name:AISRY

Model Number:ASR-5025B

Place of Origin:China

Bending angle 10-360° Adjustable Wire Bending Test Machine Wire Life Testing Apparatus Application Test plug lead wire and the bending strength of the wire, can be automatically counted at the same time show the conductor resistance of the wire, the test ...

Brand Name:Gaoxin

Model Number:GX-4019

Place of Origin:China

...drive Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC 2.Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test,

Brand Name:ZL

Model Number:ZL-2725

Place of Origin:China

...Flexibility) 30° Bending Angle Tester • Implementation standard: IEC60851-3 • It is applied to enameled flat wire with the height of the wire’s cross section from 0.800mm to 5.600mm and enameled round wire with nominal diameter from 1.600mm to 5.600mm Bending...

Brand Name:YUYANG

Place of Origin:Guangdong, China

...Cable Flex for Test Equipment Plug Wire Line Bending Tester Product Overview The 220V Cable Flex for Test Equipment Plug Wire Line Bending Tester is designed for evaluating the flexibility and durability of electrical cables, plugs, and wires under repeated bending conditions. This professional testing equipment ensures compliance with international standards for cable...

Brand Name:AI

Model Number:AIC22176

Place of Origin:China

...cable bending and torsion tester is according to pre-set test conditions (bending angle, bending rate, number of trials), with a continuously make test sample right and left bend durability test device and straight line torsion durability test equipment through an external mechanical device. Wherein the fixture terminals of torsion test and bend...

Brand Name:DAXIAN

Model Number:DX8393

Place of Origin:China

DX8393 Wire and Cable Two Three Wheel Bending Tester 1, Applicable scope: Mainly suitable for measuring the mechanical strength of PVC insulated cables or rubber insulated and extra flexible wires with a rated voltage of 450/750V or below, and with two ...

Brand Name:HOLD-ONE

Place of Origin:China

...Flexible Rubber Cable Class 5 Conductor Type For Coal Mining Machine 0.66/1.14KV Flexible Metalic Screened Mining Cable (for coal cutter) 1. Usage This rubber sheathed flexible cable used in coal-mining. Power supply connection Of coal mining machine and similar equipments. 2. Working temperature The allowed working temperature of the core is 65° C Its smallest bending radius is six times the sizes of cable...

Brand Name:JHY CABLE

Model Number:Robotic Flexible Cables-01

Place of Origin:SHENZHEN CHINA

... and measurement signals, the special cable for anti bending and torsion robot has the advantages of water-proof, oil-proof, cold resistant and wear-resistant, UV resistant, flame-retardant, bending life of more than 15 million times. It is suitable for

Brand Name:Ke Fei Te

Model Number:YC/H07rn-f

Place of Origin:Chongqing, China

... and sheathing material. They are characterized by their softness and durability, and are widely used in various electrical equipment.This Cable can be classified into three types based on the mechanical forces they are subjected to: light, medium,

Place of Origin:Zhejiang, China

Brand Name:Sino Cable Gland Factory

Model Number:SNCG Series

...bending point to reduce the risk of break to avoid electric leakage. With the characteristics of strong tensile strength, high sealing & anti-bending performance, good security and stability, they are widely applied for connecting and fastening cables or