flame propagation index testing equipment

Brand Name:AI

Model Number:FPT

Place of Origin:China

... results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two electric heater was adjusted to ...

Brand Name:DAXIAN

Model Number:DX8298

Place of Origin:China

..., which is mainly used to evaluate the fire performance of walls and ceilings, and gives test results. As an indicator of flame propagation. 2. DURING THE TEST, THE SPECIMEN IS EXPOSED TO THE TUBULAR TORCH, AND THE HEAT RELEASE OF THE LAMP IS 530 J/S.

Brand Name:Delta

Model Number:BS476-6

Place of Origin:China

..., primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2

Brand Name:Hust Tony Instruments

Model Number:HTB-048B

Place of Origin:China

...Propagation Index Test Apparatus This Part of BS 476 specifies a method of test, the result being expressed as a fire propagation index, that provides a comparative measure of the contribution to the growth of fire made by an essentially flat material, composite or assembly. It is primarily intended for the assessment of the performance of internal wall and ceiling linings The test...

Brand Name:YUYANG

Model Number:YYF012

Place of Origin:China

NFPA 701-2004 Methods 2 Textiles and Films Flame Propagation Tester Application: It is used to assess the propagation of flame beyond the area exposed the ignition source. It is applicable to vinyl-coated fabric blackout linings and fabrics including ...

Brand Name:SKYLINE

Place of Origin:China

... characteristics of conveyor belts, suitable for propane burning hazard and flammability test of conveyor belts, lifting belts and other materials in research institutes and factories, propane lamp electric mobile positioning, electronic ignition,

Brand Name:kingpo

Model Number:KP-FT401

Place of Origin:china

...Flame Tester , 50 W flames tester , 500W flames tester, Flammability Testing Equipment 1.50 /500 W flames tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4 500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3 Membrane Material Vertical Burning Test...

Brand Name:HAIDA

Model Number:HD-W

Place of Origin:Guangdong, China (Mainland)

...Index Test Equipment Product Introduction: The non-woven plastic PP (polypropylene) in the mask generally has a flowability of 1000 ~ 2000g / 10min, which is a super-high-flow plastic. It cannot be tested by the melt index meter of the ordinary mass method, and we should use the volume Method of melt index test...

Brand Name:PEGO GROUP

Model Number:HVR-4H

Place of Origin:China

...Flame Test Apparatus Lab Testing Equipment 1. Introduction of Flame test Apparatus Horizontal and vertical flame test apparatus is applied to 50W vertical flame test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment...

Brand Name:HJ

Model Number:NF-1

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

LIYI Plastic Rubber Melt Flow Index Meter, MFI, Melt Flow Index Testing Equipment, Melt Flow Index Tester Application: This mfi testing machine can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine ...

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

Digital Plastic / rubber MFI Melt Flow Index Testing machine Download Brief: ZL-3013 Melt flow rate meter.pdf Equipment Overview: Plastic MFI Melt Flow Index Test Equipment is used to determine the melt flow rate of thermoplastics (MFR; units: g/10min) ...

Brand Name:JIEDONG

Model Number:JD-6008B

Place of Origin:Guangdong, China

... combustion test device is suitable for identifying the horizontal combustion characteristics of interior materials of automobiles (cars, multi-purpose passenger cars, trucks and buses). Product Description: This burning test device can detect textiles,

Brand Name:JINHAIHU

Model Number:XNR-400C

Place of Origin:BEIJING, CHINA

XNR-400C melt flow index mfi testing machine/ Mfi tester Application: XNR-400C Extrusion Plastometer MFI Plastic Melt Flow Index Testing Machine is accordance to ISO1133;GB3682 2000,ASTM D1238. It's suitable to measure melt flow character of PP, PE, POM, ...

Brand Name:HOOHA

Place of Origin:China

Products: Hard casing retardant performance tester - Intelligent is according to the provisions of paragraph 6.10 JG3050-1998 in combustion testing requirements to develop and produce. The equipment is divide into the intelligent and common type to meet...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

Customized Flammability Test Devices: Illuminating the Path to Fire Safety In the realm of fire safety and materials science, customized flammability test devices have become the cornerstone for accurate and reliable assessment of the flammability ...

Brand Name:vouch

Model Number:6810

Place of Origin:CHINA

cone calorimeter A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen consumption in the combustion process. The amount of heat generated is directly proportional...

Brand Name:GOLD

Model Number:GD-BS 476-6

Place of Origin:China

... the flame spread characteristics of a material surface. It is mainly used to determine the fire resistance of wall cladding and ceiling materials. The test results are presented in the form of flame spread distance and index. During the test, the

Brand Name:HongCe

Model Number:VF-1

Place of Origin:China

...Testing Equipment For IEC60332 With Digital Indicator Brass Burner Standard: IEC60332-1-1 ‘Tests on electric and optical fibre cables under fire conditions – Part 1- 1: Test for vertical flame propagation for a single insulated wire or cable – Apparatus’. IEC60332-1-2 ‘Tests on electric and optical fibre cables under fire conditions – Part 1- 2: Test for vertical flame propagation...