flame method oil testing equipment

Brand Name:Shengtai Instrument

Model Number:SH0059B

Place of Origin:CHINA

... meter is developed and produced by our company according to the requirements of Chinese petrochemical industry standard SH/T 0059-1996 "Lubricating oil evaporation loss measurement method (Noak method)".ASTM D5800 DIN51581 It is suitable for

Brand Name:DAXIAN

Model Number:DX8221

Place of Origin:China

...flame retardant performance testing equipment Meet the standards: GB/T 2812-2006 "Test Methods for Safety Helmets" and GB/T 2811-2007 "Safety Helmets" in the flame retardant performance test standards for safety helmets. It is mainly used for testing the flame...

Brand Name:Shengtai Instrument

Model Number:SH102D

Place of Origin:China

... combines Partier accurate temperature control technology This method measures the liquid density according to the principle of different oscillation frequency when double U tubes are filled with different media, complying with GB / ...

Brand Name:HeJin

Model Number:NF-1

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not

Brand Name:SKYLINE

Model Number:SL-11171

Place of Origin:Dongguan

... instrument for detecting the distribution, size and grade of contamination particles in oil. The instrument is developed using the principle of photoresist method (shading method), and is suitable for the detection of particle contamination such as

Brand Name:RISING

Model Number:RSJY-80

Place of Origin:China

... GB-86 oil dielectric strength measurement method>. The instrument is preset by a dial switch, and the program is executed strictly according to the preset parameters by a computer. After operation, the results can be printed as required.

Brand Name:AI

Model Number:PSS

Place of Origin:CHINA

... in the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides data suitable for comparing the end-use performances of essentially flat materials, composites or

Brand Name:PEGO GROUP

Model Number:HVR-4H

Place of Origin:China

...Flame Test Apparatus Lab Testing Equipment 1. Introduction of Flame test Apparatus Horizontal and vertical flame test apparatus is applied to 50W vertical flame test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment...

Brand Name:GDZX

Model Number:ZX-XFS

Place of Origin:Hubei, China

... characteristics of inhibited mineral oils in water existed conditions. It is suitable to test inhibited mineral oils, especially steam-turbine oil when mixed with water. It also applies to hydraulic fluid, cycle oil, and liquids Heavier than water.

Brand Name:kingpo

Model Number:KP-FT02

Place of Origin:china

...Flame Tester, IEC60695-11-5 Flammability Testing Equipment Introduction Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc. Needle Flame...

Brand Name:Or-electric

Model Number:ORO(T1E)

Place of Origin:Wuhan,China

ORO(T1E) Interfacial Tension Tester I. Product introduction ORO (T1E) interfacial tension tester is applicable to GB/T6541 standard, based on the ring method (platinum ring method), to measure the surface tension (liquid-gas interface) and interfacial ...

Brand Name:SAMYON

Model Number:SY-0059A

Place of Origin:CN

...-2010 and ASTM D5800 Standard test method for evaporation loss of lubricating oils by the Noack A method.It’s suitable to determine lubricating oil(especially internal combustion engine oil) and the evaporation loss of lubricating base oil at 250℃. I.

Brand Name:HTI

Model Number:HTB-026

Place of Origin:Guangdong,China(Mainland)

...Flame Spread Testing Equipment, VFT-716, IEC 60332-3, KS C IEC 60332 Product Application: Bunched cable vertical flame spread tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable. In accordance with IEC60332—3—10: 2000<Tests on electric and optical fiber cables under fire conditions - Part 3-10: Test for vertical flame

Brand Name:Fanke High-Voltage

Model Number:FKDY Series

Place of Origin:China

... of death. 3. A variety of operation options, the instrument with GB1986, GB2002 ,IEC156,ASTM D877,ASTM D1816 five national standard methods and

Brand Name:HAIDA

Model Number:6016-HD

Place of Origin:Guangdong, China (Mainland)

Firefighter Boots Flame Retardant Performance Tester Description: This testing machine is custom-designed in accordance with user requirements and relevant standards to evaluate the flame retardant performance of firefighter protective boots. Test ...

Brand Name:JIEDONG

Model Number:JD-6008B

Place of Origin:Guangdong, China

... combustion test device is suitable for identifying the horizontal combustion characteristics of interior materials of automobiles (cars, multi-purpose passenger cars, trucks and buses). Product Description: This burning test device can detect textiles,

Brand Name:HOOHA

Place of Origin:China

Products: Hard casing retardant performance tester - Intelligent is according to the provisions of paragraph 6.10 JG3050-1998 in combustion testing requirements to develop and produce. The equipment is divide into the intelligent and common type to meet...

Brand Name:REFOND

Model Number:RF4008AF

Place of Origin:Shen Zhen, China (Mainland)

...standard, specially developed an automatic fabric drying rate tester. - RF4008AF is fully automated high-tech product. - The equipment equipped with high precision hot-wire anemometer, IR thermocouple, Water content sensor, precision water dripping system,