fire testing equipment with iec certification

Brand Name:DAXIAN

Model Number:DX8788

Place of Origin:China

UL790 Roof Covering Combustion Performance Fire Resistance Testing Machine Introduction: The photovoltaic cell module combustion tester UL790 is an instrument that simulates real conditions to evaluate the fire resistance of roofs and modules. It evaluates...

Brand Name:SKYLINE

Model Number:SL-7606S

Place of Origin:China

...Testing Equipment Wire & Cable Resistance to Fire with Water IEC60331-11 Standards According to IEC60331-11, IEC60331-21, IEC 60331-1, IEC 60331-2, EN50200, EN50362, BS6387: 1994, BS7846, BS8431-1, BS8434-2, BS8491 etc. Use Used for testing wires & cables with the rated voltage through the different refractory level,detect the fire...

Brand Name:GAOXIN

Model Number:GX-6055-NT

Place of Origin:CHINA

... Testing Equipment for IEC 62133 UN38.3 Requirements: Short-circuiting of the positive and negative terminals of the cell at ambient temperature shall not cause fire or explosion. Test Standard: IEC 62133-2012, UN38.3, UL 2054, UL 1642, IEC 62281-2004, IEC...

Brand Name:GOLD

Model Number:GD-IEC60331

Place of Origin:China

IEC 60331 Cable Fire Resistance Tester Fire Equipment For Product Testing Introduction of IEC 60331 Cable Fire Resistance Tester Fire Equipment For Product Testing The cable fire resistance tester is applicable to IEC60331 Tests for electric cables under fire conditions - Circuit integrity part 11: Fire alone at a flame temperature of at least 750 °C. It is used to obtain and determine the fire retardant characteristic parameters of fire

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, ...

Brand Name:AI

Model Number:CTA

Place of Origin:CHINA

Wire and Cable Halogen, PH & Conductivity Testing Equipment Introduction The International Electrotechnical Commission IEC 60754 Part 1 and Part 2 test is performed to determine the degree of acidity of gases evolved during the combustion of materials ...

Brand Name:ASLi

Model Number:ES - 1

Place of Origin:China

CE certificated lab equipment electrodynamic vibration testing equipment meet IEC 60068 standard CE certificated lab equipment electrodynamic vibration testing equipment meet IEC 60068 standard Application: We are manufacturer of electrical vibration ...

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

... by HJ Company, specially designed to evaluate the fire hazards of electronic appliances, insulation materials and other products. With precise flame simulation technology as the core, combined with intelligent control and humanized ...

Brand Name:kingpo

Model Number:KP-1060

Place of Origin:china

Capacitor Discharge Tester Description For IEC Testing of residual voltage after plug disconnect. The KP-1060 disconnects the line at the voltage peak and analyzes results to the requirements of various Standards, allowing quick results. Scope output for ...

Brand Name:YUYANG

Model Number:YY429

Place of Origin:China

...IEC 60331 Line and Cable Fire Resistance Testing Equipment Introduction: Fire Resistance Tester is used in test conditions where the basic flame temperature is at least 750ºC and tests the cable exposed to the flame that needs to maintain the circuit integrity. Standard: IEC 60331 - Test for electric cables under fir conditions - Circuit integrity IEC 60331 Part 11 - Apparatus - Fire alone at a flame temperature of at least 750˚C IEC

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

IEC 60695-11-5 Flammability Testing Equipment Needle Flame Test Standard: IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance Application: This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test

Brand Name:ASLI

Model Number:ES-3

Place of Origin:China

CE certificated lab equipment electrodynamic vibration testing equipment meet IEC 60068 standard CE certificated lab equipment electrodynamic vibration testing equipment meet IEC 60068 standard Application: We are manufacturer of electrical vibration ...

Brand Name:LAB TECH

Model Number:CFRT

Place of Origin:China

IEC60331 Electric Cable Fire Resistance Testing Equipment -- Model CFRT Introduction: CFRT IEC60331 Electric Cable Fire Resistance Testing Equipment is used for testing cables required to maintain circuit integrity when subject to fire alone or fire with ...

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine For Fire Safety And Regulatory Agencies In the field of electrical engineering and fire safety, the IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine is a crucial apparatus...

Brand Name:ZL

Model Number:ZL-1048

Place of Origin:China

... test bench includes the following parts) 1.1 Cable Support System 1.2 Continuous Detection Device 1.3 Heat Source Cable support system: The cable is clamped horizontally at both ...

Brand Name:KINGPO

Place of Origin:China

...IEC Test Equipment Needle Flame Tester IEC60695-11-5 Needle Flame Test Apparatus Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment...

Brand Name:Sinuo

Model Number:SN773A

Place of Origin:China

... result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-...