fire testing cable analyzer

Brand Name:Delta

Model Number:BCV

Place of Origin:China

...Cable Fire Testing Cable Burning Tester Introduction: BCV Bunched Cable Fire Testing Cable Burning Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a defined volume. Additionally, if bunched cable...

Brand Name:SKYLINE

Model Number:SL-BS6387

Place of Origin:CHINA

...er fire conditions. It is applicable to cables of rated voltage not exceeding 600/1 000 V and of overall diameter less than or equal to 20 mm. Complies to Standard BS6387 The test given in this British Standard is applicable to cables having two or more

Brand Name:YUYANG

Model Number:YY412

Place of Origin:China

... conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable. In accordance with IEC60332—3—10: 2000<Tests on electric and optical fiber cables under fire conditions - Part 3-10: Test for vertical flame spread of

Brand Name:DAXIAN

Model Number:DX8363

Place of Origin:China

...products. This type of machine provides reliable and accurate measurements, and is designed to meet the requirements of international standards such as IEC/ EN 60332-1 Test Apparatus. Our Fire Testing Equipment is equipped with electronic spark ignition,

Brand Name:DONGJIAXIN

Model Number:BBTRZ

Place of Origin:CHINA

...Overload Temperature 125°C Short-Circuit Temperature 250°C The design, construction and testing are compliant with international standard IEC60502 and testing standard BS6387,with standing temperatures of 950~1000 °C for 90 minutes, which means they are

Brand Name:JHY CABLE

Model Number:Fire alarm cable

Place of Origin:SHENZHEN CHINA

.... 3. Fiberglass tape or fire-resistant mica tape insulation ( Optional ). 4. Test on electric cables under fire conditions complies with IEC60332-3-24: 2000, UL 1424, Power, Limited Fire alarm Circuit Cables C22.2 N0. 208-03, Fire-Alarm and Signal. 5.

Brand Name:CHINT

Model Number:FR-CU/XLPE/PVC(LSOH)

Place of Origin:CHINA

Cable decription 1.1What is FR Cable The typical structure of refractory cable is the cable with an additional refractory layer between conductor and insulation. This structure enables the cable to withstand 750 C, 90 minutes of fire resistance test. 1.2 Benefits of FR Cable In fire accidents, fire-resistant cables...

Brand Name:Rohde & Schwarz

Model Number:ZVH

Place of Origin:Germany

...Cable Analyzer ► Frequency range from 100 kHz to 3.6 GHz or 8 GHz ► 100 dB (typ.) dynamic range for filter and antenna isolation measurements ► Factory calibration over entire frequency range ► Built-in DC voltage supply (bias) for active components such as amplifiers ► Power meter option ► Saving of measurement results on SD memory card or USB memory stick ► Easy operation with user-configurable test

Brand Name:OEM Produce

Model Number:Alarm Cable

Place of Origin:Hangzhou, China

Fire Resistant Cable for Smoke Alarm 14AWG FPLR-CL2R Vertical and Paralel Flame Test Fire Alarm Cables 14AWG FPLR-CL2R AT1424 Power Limited Multiple donductor Application Indoor for: Audio Circuits Control Circuits Initiating ...

Brand Name:OEM

Place of Origin:China

... 125°C Short-Circuit Temperature 250°C The design, construction and testing are compliant with international standard IEC60502 and testing standard BS6387,with standing temperatures of 950~1000 °C for 90 minutes, which means they are capable of

Brand Name:GOLD

Model Number:GD-IEC60331

Place of Origin:China

...Cable Fire Resistance Tester Fire Equipment For Product Testing Introduction of IEC 60331 Cable Fire Resistance Tester Fire Equipment For Product Testing The cable fire resistance tester is applicable to IEC60331 Tests for electric cables under fire conditions - Circuit integrity part 11: Fire alone at a flame temperature of at least 750 °C. It is used to obtain and determine the fire retardant characteristic parameters of fire

Place of Origin:China

Brand Name:CHENGFENG

Fire Testing Machine Cable Burning Lab use Bunched Cable Flammability Test Equipment IEC60332-3 Remark : This equipment is a test device used to evaluate the ability of vertically installed bundles of wires and cables or optical cables to inhibit the vertical spread of flame under specified conditions. The equipment shell is made of all SUS304 stainless steel, and the whole machine is composed of: test...

Brand Name:SHANCABLE

Model Number:WDZAN-YJY 0.6/kV

Place of Origin:SHANGHAI,CHINA

...Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines Innovating Fire Safety: Shanghai Shenghua's Advanced Fire Resistant Cables for Critical Infrastructures​​ In high-risk environments like power plants, subways, and skyscrapers, ​​fire safety isn’t negotiable​​. A single cable failure during a fire can cascade into catastrophic losses. Shanghai Shenghua Power Group Cable addresses this with its ​​FRLS Fire

Brand Name:XZH TEST

Model Number:XHGG502

Place of Origin:Xi'an, Shaanxi, China

...Cable Fault Pre Locator is a special instrument for measuring and analyzing power cable status and fault distance. It combines modern electronic technology and computer technology to realize signal filtering, acquisition, data processing, graphic display and graphic analysis to complete cable speed measurement, cable Length test, cable fault distance test. This cable...

Brand Name:HOLD-ONE

Place of Origin:China

... with the latest Standards and Codes of Practice covering fire detection, alarm systems, emergency lighting or other vital power supplies. We has comprehensive modern fire testing facilities on site to ensure cable integrity. Thanks to this facility it can

Brand Name:Shenzhen Chengtiantai

Model Number:BBTRZ

Place of Origin:Guangdong，China（Mainland）

.../1000V cables Service Temperature 90°C Emergency Overload Temperature 125°C Short-Circuit Temperature 250°C The design, construction and testing are compliant with international standard IEC60502 and testing standard BS6387,with standing temperatures of

Brand Name:HT

Model Number:Fire Alarm Electrical Cable

Place of Origin:Zhejiang haiyan

... when fire strikes. A fire alarm system is reliant in no small part to the cabling that connects the devices and supplies power. Without reliable, robust cable the fire alarm system would be prone to costly faults and malfunctions. It is therefore

Place of Origin:China

Brand Name:Zion communication OR OEM

Model Number:Fire Risistant Cable Unshielded 2 Cores

...Fire Risistant Cable for Connecting Fire Alarms Quick Detail: Fire Resistant Cable FRHF Unshielded 2 Cores Bare Copper Conductor Silicone Rubber Insulation Fire Resistance Halogen Free PVC 100M, 200M, Roll, Carton 180 Minutes under Fire of 750 Degrees without Short-Circuit. MOQ: 20 KM Description: KT1404 FRHF Unshielded 2 Cores Fire Resistant Cable Bare Copper Silicone Insulation is a specific type of fire...

Brand Name:Zhongdong

Model Number:WDZN-YJY

Place of Origin:Hebei，China

...Fire Resistant Cable Copper Conductor XLPE Insulated APPLICATION Standard fire resistant cables for use primarily in fire detection, fire alarm, voice alarm, and emergency lighting circuits. These cables are designed to continue to operate for a period of time in a fire situation. ‘Standard’ fire...