evse cable pull test equipment

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

...Cable Anchorage Test System EVSE Cable Pull & Torque Test Equipment Complied Standards & Clauses It is designed and manufactured according to IEC 61851-23:2023 clause 11.6.102 and Figure 110, Figure 111 and Table 114. Product overview The Cable Anchorage Pull Force and Torque Test Apparatus (Model SNQC1007B) is a high-precision testing solution engineered for manufacturers and laboratories seeking reliable EVSE...

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

...electric vehicle charging stations, fully compliant with IEC 61851-1:2017, clause 11.6. It evaluates whether the charging connector and cable assembly can reliably withstand specified tensile forces and torsional stresses, ensuring long-term durability and

Brand Name:Pego

Place of Origin:China

Model Number:PG-CRT

...Testing Equipment IEC60320-1 Pull Test Equipment for Connectors and Plug Connectors 1. Introduction The pull test apparatus designs to meet the test requirements of IEC60320-1 clause 22.2.3 and figure 6, for testing the cord (cable) anchorage of connectors / plug connectors relieve from strain and twist. Fix the test sample in the test...

Brand Name:INFINITY

Model Number:IZ1001 Series

Place of Origin:MADE IN CHINA

...Yank Tester) This innovative product, the Wire Cable Abrupt Pull Tester (Wire Tension Kick Yank Tester), is specifically designed for the USB wire and cable industry. It is a revolutionary testing device that ensures the quality and durability of cables by

Brand Name:YUYANG

Model Number:YY843

Place of Origin:China

...prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples(special attachments are available). ASTMD903 servo motor button pull tester Consists of an upper snap clamp, a

Brand Name:Haida

Model Number:HD-B615

Place of Origin:China

ASTM Used Pull Test Equipment Rubber Testing Machine For Wire , Cable HD-B615A-S Universal Test Machine.pdf GENERL SPECIFICATIONS Estimated Packaging Dimensions: (W*D*H) 910*820*2210mm Power supply source: single-phase, ...

Brand Name:HAIDA

Model Number:HD-B608

Place of Origin:Guangdong, China (Mainland)

...Pull Test Equipment Textile Testing Tester 0.1N Readability PRODUCT INTRODUCTION Button pull test equipment is used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments, prevent the buttons divorce from the clothing, which case the dangerous if baby swallowing the buttons. So that every button and fixed parts on the clothing are required the detection of the button pull test...

Brand Name:HeJin

Model Number:HJ0608A

Place of Origin:China

...Cable Flexing Test Equipment for Power Cord Bending & Fatigue Life Testing | IEC Test Equipment Manufacturer Product introduction: Designed for repeatable and reliable cable bending tests, this IEC 60335-1 compliant Cable Flexing Test Equipment evaluates the mechanical durability and fatigue life of power cords and flexible cables...

Brand Name:I-suntop

Model Number:GFKA-100

Place of Origin:China

...Cable Hook Test Equipment I-suntop Optical cable mechanical testing equipmen... 1. Usage of IEC-60794-1-2 Standard Outdoor Fiber Optic Cable Hook Test Equipment: This equipment is suitable for impact resistance hookup test of overhead optical cable,including type test (or routine test) and delivery test (or delivery test) to determine the ability of optical cable...

Brand Name:Delta

Model Number:CFL

Place of Origin:China

... cable, short circuit, earth, high resistance leakage, high resistance flashover fault of the metal overhead lines, and the broken & poor contact of the cable. CFL Cable Fault Testing Equipment also can test the length of the cable and the speed of the

Brand Name:KEJIAN

Model Number:Kejian Kinsgeo

Place of Origin:Dongguan,China

... summary: Double Pole Pull Testing Equipment with Panasonic Servo Motor for Testing Compressive Strength is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of

Brand Name:DAXIAN

Model Number:DX8297

Place of Origin:China

...Cable Burning Testing Equipment Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable...

Brand Name:SKYLINE

Model Number:SL-SE03

Place of Origin:China

Cable Electronic Testing Equipment IEC60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the requirements...

Brand Name:GALAXY

Model Number:GS280

Place of Origin:CHINA

4 bundle conductor 28T Diesel Hydraulic Cable Pulling Stringing Equipment 28T Cable Pulling Stringing Equipment Our GS280 28Ton hydraulic puller is equipped with the steel wire rope automatically winding device, which can arrange the rope by itself and ...

Brand Name:Herrman

Model Number:GNZ-1000

Place of Origin:China

...cable torsion testing equipment ADSS cable torsion tester DESCRIPTION Fiber optic cable torsion testing equipment is used to test optical cable resistance torsion properties. By applying torsion force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable jacket cracking, no damage of fiber and components Fiber optic cable torsion testing equipment...

Brand Name:Kinte

Model Number:UL1685

Place of Origin:Guangdong,China (Mainland)

... by the SUB304 mirror stainless steel, with the appearance of beautiful, rust and corrosion characteristics; 2, the top of the box with ventilation exhaust system, the exhaust gas can be discharged to the test after the completion of the outdoor; 3, the

Brand Name:HongCe

Model Number:HDX1301

Place of Origin:China

Universal Conductor Resistance Fixture HDX1301 Test object cable conductor Test resistance measurement Test sample 1mm² ~ 630mm² conductor Reference standard IEC 60245-1 Usage fixture Clamp distance 100~1000mm Material Aluminum alloy base plate, copper ...

Place of Origin:China

Brand Name:CHENGFENG

Dongguan Chengfeng Testing Equipment Co., Ltd is Located in Dongguan City, Guangdong Province, China, we are a high tech enterpris which is specialized in development and manufacturing, The most professional OEM manufacturer in the country,we mainly ...

Brand Name:ASLi

Model Number:AS-PC-Volume

Place of Origin:China

...Pull and Compression Test Machine Application: AS-PC-Volume Computer Servo Control Pull and Compression Test Machine is an electrically operated machine that is used for testing tensile strength and elongation of materials like plywood, wires, cables, conductors, ferrous and non-ferrous materials. Pull and Compression Test...